Video

I have a problem, my master doesn't have the blue light flashing quickly, when I hold the + button and the power button it flashes a red light for a few seconds and then the blue light flashes slowly.

Can we use 4 these systems in one room (we need to record 11 people in one time)?

very relevant

I bought a master later to divide my wt5s kit into two groups, I wanted a master with 3 remotes and another master with 1 remote, but the new master I bought didn't pair. The master I bought is identical except for a small sticker saying BR on the battery compartment.

Is it possible to connect S and D version together? For example to add to WiTalk WT3S one or two slave D (from Witalk WT2D) version?

What is your microphone name and model?

I bought the seramonic smartrig yesterday, using the dynamic microphone I found a lot of noise

Your microphone model name

Why won't it connect to a PC?

Thanks Relevant even today.

hi i have a question,, can i use two master headset at the same time?

my device fgets no power and green light, what now?

Please, if I connect a single 3,5mm microphone and set it to mono output, can it work as an attenuator? Like turning the two knobs to different amplification to have two different sound levels in each output channels for cases of clipping.

There's a setting in a phone to turn your charging port into an external mic jack but not sure that setting exists on a tablet.

Hi have you tried connecting your headphones. No one seems to do a reviews if the headphones work with your IOS devices by connecting the headphones to the smart rig to hear if you get a good level of volume so it doesn’t peak.

Could you please turn up the music more? I can still hear your voice a little bit.

what should I do if after a few minutes channel B goes out on it, and no matter what I do, it continues to turn off channel B?

nice

Top!

I was brought to this review while looking to resolve an issue with my Saramonic interface, I couldn’t get the thing to be recognised under iPhone. If your getting the same issue I resolved this by going to settings > FaceID and passcode, go to lock Screen options and allow access to the accesories from the Lock Screen, enable it and somehow it works even though the phone is not locked the interface is now recogisned. Thanks again for a great review ❤

Which app can I use to monitor the audio? Specially in android phones?

can we pairing master & master with remote headsets?

I just bought a smartmixer, but there is a buzz in the background. How do I fix it?

Can this be used in amplitube or other guitar effects mobile apps?

Do you have some videos where we can hear the sound quality? And comparison with other options like the Hollyland? Thanks!

Hi if I plug my headphones into my A7R5 will I be able to hear both channels (both connected units). I'm planning on using two Rode Filmaker Receivers.

Great review. But ... please don't put background music on when we are trying to listen to mic quality. Impossible to hear the true sound. But keep posting, great content.

Damn! That thing is expensive

Well now I have to know the English translation of whatever that song was. For the H4N, you can output the audio directly to your camera just like the SmartRig using the recorder's headphone output. Plus, if you still want to monitor your audio through the recorder, just use a splitter. Using the recorder will get you another audio track for safety, so that's a big advantage.

I just bought the pax2. Newbie question:with a 2 person interview, I'd like to have the voices equal on both left and right, like on mono. Would I set the individual gain levels on stereo setting, then switch to mono for the recording? Thanks again. I'm learning everything from CZcams University.

Hi. I just bought the saramonic audio mixer. I want to run 2 Rodelink wireless Lavs to the mixer then to my camera. My question, is it ok to have 2 phantom power devices together? The Rodelink recievers have phantom power and so does the Saramonic. Can I keep both on? I'm new at all this and have lots of questions. Thanks!

you dont know how to do a review, test the micro whit a bluetooth speaker?

Hi, When I try to record a guitar using a Bandlab DAW I noticed a hiss sound. How to fix it?

This is the best review of Saramonic SR-AX 107. Very detailed and it's really nice to point them out in good points.

What's your opinion about Saramonic smartrig plus?

this item reduce the signal a lot, and then of course introduce more noise. this must me a fabrication mistake or something.

Sir edwin kelangan pa po b ng apps sa android d ko mapagana po kc

When i try to run this on my a7iii with a lav mic and shotgun mic it doesn’t work. Is there a setting in the camera that allows it to work?

any recents returns about this : kit Saramonic VmicLink5 ? thanks your returns

can you have 2 mono mic inputs into one mono output?(my camera only records mono) or if you select mono will it only record the one mic channel?

Will this work with two wireless go sets?

The cool part about these microphones is they have It upgraded variant he gets around 500 ft of range

If you plug the microphone audio out into the live feed it actually sounds better in the finished recordings and you'll have control over gain and you won't get that over compressed sound it will sound less isolated though but totally worth it for interviews

Saramonic wm4c 👍

My one question is how do you know what to set the stereo volumes at?

Did anyone catch what he's running on the left stereo side? There's a mic in the right. Is that done kind of in ear monitor he's running directly into the left side?

If you use the Rode NTG3 condenser mic with the Saramonic SR-AX101 will you get that nice sound similar to when you tested the NTG3 with the SR-AX107? (So was the majority of the white noise coming from the recorder or the microphone?)

I Just stumbled upon this rig. I am going out to buy one this week!!! Serious piece of equipment. I didn't know you could attach other stuff like lights and it attaches to a tripod! Seriously! Could this get any better! One Life, One Search, Shane

Brilliant! Probably will have to get us two of these for our podcast.

Hi i connected saramonic rig ii (1 xlr) phantom power48v to my canon dslr i dont get audio but audio works when i use on my smartphone. What is wrong