Video

Does IT make noise

Great update again team. Keep up the great work.

Looks like a great product. Looking forward to ability to purchase. Unfortunate that Canadian investment not possible.

thanks for the update, awesome progress yall are making, timing was great as i finally got the refund back into bank account from the last raise that didnt work out, looking forward to see where you go. I believe you are adressing a HUGE market potential in low wind residential, without heavy roof loads like for solar, huge potential.

Am I correct in assuming that you will have an anemometer near the alpha unit so you can gauge the performance at low wind speeds?

Nate, how did that black direct drive 36 pole radial (pancake) alternator work out? I have one that puts out a good voltage and current at low RPM (60-100 rpm) but loads heavy at full load. I was wondering if a 3-D printed ring gear for a belt drive attached to the drum of the alternator could reduce the full load torque to a manageable level.

I've not looked back through old episodes. What I have not heard anything about is what size base/cement pad are you currently thinking these turbines are going to be needing? Your not done designing so it could could change. I understand that needed flexability.

How much power would a turbine probably produce, that fits exactly to the frame shown in your video? Thanks a lot!

GREAT Update Chris & Cheryl- smart move re the development of your own generartor - that can wait just now. I really like you are testing and testing and testing others generators to find your exact needs re tourque and low revs generation.. your transparency comes thru Chris & Cheryl- well done Guys. Upwards and Onwards...

Loving the updates! Unfortunately from the comments there are a minority of people that a) didn’t watch the video and b) don’t understand how complicated the process of development can be. I invested with StartEngine. I believe in you guys and your product. Keep up the amazing work!

What's happening with the scoop design. Is that finalized?

If you need a test location to test things at. I am retired and live on a ridge in Waterford, VA and I have a background in Systems Management and Monitoring of Network equipment via SNMP. I would be willing to assist in testing if you would like to test a system here. 😀 Happy to Help. :-D

this is taking too long

El Paso, TX, Ruidoso, NM, RV Motorhome here patiently waiting. Charge on!

Good luck for Tashkent

Can't wait to see what you guys produce! I'll be one of your first customers for my off grid cabin.

Thanks for the update, looking forward to the future with Harmony Turbines!

best wishes 👍

I am planning to move to the Jersey Shore area near the bay and ocean. My plan before seeing your videos, was to put wind and solar on my next house. I hope you have completed your testing and will be selling your systems by that time. Thanks for your vision, I hope your dream comes true. Phil

you sure have the been in the worst economy while pushing forward , i am one of thousands waiting and wanting harmony

3d print Is possible ?

“she still had the sink open” don’t blame your mum 😂

Ok, but where is the most effective place for the magnet to pass? Over the whole of the coil or over the end of the core?

3D printing???

👍👍👊

the technology future, is here; congratulations

Do you all have any of the product for testing? I live in the caribbean Trinidad and Tobago to be precise, we have high winds down here called the northeast trade winds it’s gonna be super for testing….

Why not take the opportunity to attach a garden hose and flush out any possible sediment in it? I did read where someone else tried something similar and when he pulled the element out, he couldn't put the new one in because sediment was preventing him.

Drag based high solidity rotors like this have been around forever and are nowhere near as efficient as modern lift based HAWT.

It is nice to see these folks. But I am hoping to see your turbine IN ACTION. I want to see it work and show how much power it produces and how that benefits a home owner , ranch, farm, or other business . Do you have a video of that ?

I am looking for a comprehensive video that shows your product in action, actually providing some level of power to an actual home or business. Do you have that ?

wow. This could prove revolutionary. but i am contused that how the main pip rotate to close and open the wings??

great update. too often i've been part of a kickstarter campaign that says nothing! so your updates are really appreciated

I note that the alternator coupled to the prototype is the EXACT same one I have and have been unable to locate a appropriate blade system. I know mine can produce .6V at 10 rpm and over 60V at about 60 rpm but it needs serious torque to not stall; the Harmony could be the answer! Lower coefficient of drag than the typical Savonius while producing equivelent torque. Most of the areas in my country have wind speeds at 20 feet of about 12 mph; well within Harmony's range of function. Would you offer the blade unit with a universal coupler for customers to utilze their own alternator?

Chris- Cheryl- Hannah & Team- WOW great upadate - a bit of a bummer regarding the Generator Company in CO you were to visit- BUT as they say ALL things happen for a reason - and others will arise Im sure. Love the general update and LOVE the transparency with NO B.S. ! - most important when seeking Investors. Please keep me in mind for AUSTRALIA & NEW ZEALAND when it comes to global BETA testing 🙂 As soon as my investmnet funds drop I will load up big time - as I have always believed in what you are doing - and will reach out to several kety contacts in renewables to take a serious look at Harmony Turbines and all on offer. A CLASS Operation your Guys are - thank you. Cheers, Mark.

Great communication and good update. Welcome Hannah, It is nice to see your face. Best wishes to the entire Harmony Turbines Team.

Is there another way I can invest other than Andes? They are asking for too much information that is none of their business.

You guys can do it! Much encouragement from Florida

AWESOME WORK!!!

Best video ever for fixing this problem! Thank you both so much! (i only cleaned it , and it worked again.)

Thank you for reminding me about the crowd funding. When you made the initial announcement, I was unable to successfully make an additional investment. But this time the process worked correctly, and I was able to put a little more money toward making your product a reality. I am still looking forward to trying one out on our farm. We usually have some type of breeze all the time and today, there is a storm building and the wind is blowing quite hard in gusts. I think your design is the key to taking advantage of all those different wind speeds. Speaking of storms, I know your design will furl as wind speeds increase but are you taking into your calculations sudden changes in wind speed. I'm watching the trees outside. There is probably a steady 10-20 mph wind, but sometimes I am seeing a sudden increase to double that or more. Will the turbine be able to furl quickly enough to protect itself and how long will it take it to open back up once the gust is gone. You have probably considered all of these things, but as I am invested (quite literally) in your success, I just wanted to mention those thoughts to you.

Why not use a CVT (continuously variable transmission) ?

Yassssss!!!!! Love it!

A great video Chris & Cheryl and Team, keep up the great work. You all are doing an awesome job. The video updates are awesome. Keep it up. Each month you are making progress. awesome work.

I don’t see a link up there!

That’s a lot of shirts!

Hannah is great with your communication! It is nice to see her face after emailing her. Welcome, Hannah!

Looking forward to it.