Video

I wanna get some of these

Ok, but how was the weather that day? Was it all over the place? 😂 thanks for the video!

You get precisely what you pay for. Best game bullet in my book

Speer bullets are my favorites

Regarding the muzzle break, I was told by my local Tikka dealer that they wouldn't install one because it would void the warranty. Mine is in 7mm rem mag.

Dang. This sounds like a good commercial for the bargains that can be found in Speer Hot Cores or Grand Slams.

Good choices, I really can't argue with anything said here except I'm liking the hammer mono bullets in all my middle weight hunting guns - have you tried em?

Have been looking for a review on this for elk...

Impressive !

Subscribed ! found this while looking up projectiles for the blackout would love to see how they perform on that. Cheers all the way from Australia

Very interesting. Testing at 3,4 and 5 hundred is super valuable.

I’m curious what powder and COAL you guys ran on this load. Please share if you can. I’m trying staball match, varget, and cfe 223 and seeing weird data in hornadys manual for this pill. 2.140 seems way to deep for this ELD style bullet.

Sorry, but for $1500, nothing should be 'unrefined'. You're paying for a barrel, and that's about it. Just sell me the barreled action.

Love your channel thanks for the hard work

I have the wooden stock 6.5 Creedmoor version of the T3 with the 22-inch barrel. I really don't care about the weight difference as much as the ballistics and better stock right out of the box. I shoot the 143-grain hornady ELDX precision hunter ammo with the Leopold ballistic-specific scope that has a yard-specific reticle. The yard specific reticle eliminates the need for cheat sheets or memorizing the yardage in the field. The cost for a gunsmith to thread the barrel is $150-$200. Since I already have the 22-inch barrel, I don't need the added velocity with my silencer. I use a fabric-style comb on the stock much like yours. I have a bipod on it and a sling. I plan on replacing the plastic trigger guard, clip, and plastic on the end of the bolt. While this will not enhance the ballistics, it will prevent breakage in the field. This is a tack driver out to 500 yards. Im taking it bear hunting in 2 weeks.

990 😅 I payed for my lefthand 6.5prc coming end of this year about 2300 🤣 sometimes it sucks to want US stuff living in Europe.

Could you try the terminal ascent factory ammo in a 30-06 please?

Great content

Love these concise to the point short winded scripted no errrs or you knows, Will be back for more….thanks

Where are you shooting at? Looks beautiful South Dakota?

Just Starting 6 arc journey. Running an Ammo Dump AR lower, Rise Armament RA 240 ERT single stag gen2 trigger and a Sanders Armory 18" match grade 1 in 7.8 inch twist. Going down the rabbit hole!

Sometimes I hear stories of hunters tracking deer and looking for blood trails through swamps. My mentor taught me to break the deer down; just like you had mentioned. Now he’s eighty-two and I’m retired. Barnes TTSX are my preferred bullets. Recently I deliberately harvested a buck for a friend who wanted a batch of summer sausage. When I dropped the buck at the processor the lady checking me in was helping me drag the deer into the cold locker. She said, “You know this deer would produce a little more sausage if you hadn’t smashed both shoulders!” Sometimes your training just can’t be denied.

Thank you for your testing and the video. I’ve used Barnes all copper for about twenty years in muzzle loaders and center fire hunting rifles. The bullet has always completely penetrated a whitetail deer. One entered the right shoulder and exited the left ham. Expansion isn’t always my primary concern; rather full penetration through bone and muscle tissue is what I’m seeking. I figure a whitetail without skeletal stability can’t run; and a whitetail with a hole through both sides of its diaphragm can’t keep its lungs inflated. A deer that can’t breathe can’t run, at least not far. If I planned to regularly hunt game animals past three hundred yards with a .308 Winchester round, I would probably load Barnes LRX. All of that said, I believe the .30-06 and the large case .308s will be where the TTSX expands at four hundred yards and beyond. It might be possible for a ballistician to get the .30-06 to nearly 3,400 fps; and it’s performance would likely be ideal at those longer ranges. My opinion is that you can cater your cartridge and bullet to the game and range you intend to be harvesting at. If I intended to stay within 300 yards on game then I would select a .308 Winchester, a .30-06 would suit me better for out to .300, and I would be cramming powder into a Weatherby or Nosler .30 caliber if I planned to take most of my game at 500 yards. Otherwise I would call on experience and ethics as to whether or not I feel confident. I love that you keep our grey matter churning with these projects.

I recently bought some nosler accubonds 6.5, 140s and planning on reloading them into a 6.5-300 wby, I wonder how they will do with that kind of velocity gonna be like 3100 at muzzle. Should look close to the 28 nosler test perhaps

Thank you. Love the content You present and I love How it saves me time and money although I still get the practice But. With the best right off the hop as Long as the raffle likes it

Thanks for doing this test. I just picked up 400 120 E Tips of the early style without the relief grooves. I couldn’t pass them at 75% off. Been looking for a 400 yard deer and elk load for my Sig Cross. Really hoping these fit the bill.

I plan on hunting with the Oryx bullets

Excellent work bud, subscribed

Good looking expansion to me love your channel and work y'all do

Should give the Fort Scott Munitions TUI (Tumble Upon Impact) rounds a try.

Your reviews are the best I've seen. Good job brother!!

I’ve shot 14 deer with the 95 grain 6mm SST. With it I’ve taken frontal shots, spine shots, quartering in and away, and broadside. Out of a 6mm Remington with 3,000fps muzzle velocity I’ve only recovered one bullet and it was from a broadside shot that shattered both shoulders and was recovered under the hide on the offside with 57grains retained weight. Water may not have painted this bullet in the most flattering light but deer sure do. I’ve used the 150 SST out of a 30-06 and a 130 out of a .270 and all of them have been pass throughs with phenomenal terminal performance inside the chest cavity. I really appreciate yalls testing and it’s excellent for some reason the SST just didn’t show today maybe try it some more before you write it off for good. Keep up the testing guys!

My Ruger American really likes the ELD-X, coming in at 1/4" at 100 yards. Fine tuning loads for a muley and bighorn hunt this fall.

Looked good. Didn’t see lots of recoil.. but I sure do feel it. 👍🏻

I wonder how fast you'll shoot your barrel out with proof research barrel hopefully she'll hold up for a while the 28 nosler is a burning out barrel machine but extremely accurate

Maybe? acceptable at 100 yards? Definitely a bullet made for the 22 creedmoor, 22 ARC, or 224 Valkyrie! I’ve used the 70 grain TSX in 5.56 on pronghorn out to about 150 yards. I would be more leery about energy at longer ranges in the 223 than perhaps expansion. I’m currently using the 62 grain TTSX in 223, but haven’t shot any game with it yet.

Great Job! My Browning Speed 26 barrel 7 RM performs similarly.

I’ve been using Berger 185 VLDH in a Cooper ‘06 for 300-500y shots with range finder and dial up. I’m going to try Nosler 180 partitions for shorter ranges on stag. I know they will hold together and likely print 1moa or less.

Threading of the barrel for 30$ (beer money) if you know the gunsmith 😉 about 100$ when i payed the full rate in a different store. two long days i waited. Nice rifle and scope. Cheers from Sweden 🍻

I run those in my 260 Rem. They just work

Excellent video sir, thank you.

The recoil mitigation from that brake on a 28 Nosler is very impressive. What a nice rig! I see many harvested critters in your future. Thanks for the vid.

I have had eight or nine of them. At the moment I have three. And I love them. Best bang for your buck. No doubt in my mind.

Please try 160 grs Speer grand slam in 28 nos

Great video you guys should do more on the 458 Socom like the Barnes ttsx 300 grain and the Hornady 325 grain FTX

I thought I got a steal when I bought a barreled receiver Model 670 for 80 dollars and geez has its been a headache lol.

I Would NEVER hunt with these.. But to each their own !

Hey Nicely done again !!!. I may have missed it , but is this a handload ?? I can't figure out why its so slow.. My 308win handloads will push these into 2700...

Hey Guys,,, great tesing these are indeed an amazing hunting bullet.. one thing I'd like to point out is that bullet manufacturers are FAMOUS for exaggerating bullet BC's especially on hunting bullets where the hunting type are far less likely to call them out on it.. Saying that , these bullet WILL not match an SMK for drops ect.. So re-check that data if your handloading

Great to see you back! Love your videos. Would love to see you guys do a video on Barnes TTSX .284 150 grain (I shoot that in my 7mm rem mag).