Video

When you pay as much as these cost new. You have the right to be particular.

June 18 2024 -- I literally just bought 2015 KTM 250 Graphics from OmxGraphics for my 2024 Xpro 5 speed flor Yellow frame. Had them change the front plastic to an KTM EXC front plate and I'm planning to do the same thing!!! you beat me to it

My ranger was real hard at first to shift, but I use it at the farm every single day and always in and out of reverse. It’s very easy now, maybe just gotta break it in. I know most don’t use reverse like I do though

It's fine until you try to use the hold back going down a steep hill at it comes out of gear and sounds like you are stripping the transmission gears. Crappy machine.

Easy to lose those quick change bits i bet.

What jet size did you used and what needle hole did you use ?

Does the 30 fit?

I just bought this bike will be here in a week

What did u take the plug out with

i have this same bike mine is blue and only problems i’ve had with it was carburetor i changed to a mikuni carb and it runs great

i have 1 of these myself if you’ll take the spark arrester out of the exhaust it sounds 100% better

You are helpful rn

Why 😂😂😂😭😭😭

Man do you know of any skid plates and luggage racks that fit the titan 250. Id like to make mine into a little duel sport without making it look dumb

Where do you buy the graphics

why not take out the box and get a cool air intake

How’s it holding up so far?

What plastic kit do you have what year and what site

I’m gonna buy this exact bike I’m hyped to see other people with it, what’s your least favorite part about the bike, and have you had any concerns or any issues?

What pipe did you get

Sucks.. I was working this past Sunday and and during my shift some scumbags stole my motorcycle.. so this hurts to see in my recommended

Have you got a video of you removing the safety latch? I’m buying a milwuakee version but I’d imagine it would be the same

Just got the 12 volt 503 3/8 for $94 bucks on Amazon versus Lowes $179 and I love it...just love it thanks for the video❤

Great video!! Are the forks fully adjustable?

I admit I didn’t watch your video but having recently installed a Nibbi on a brand new Templar X pro I would recommend putting your fuel line on your carburetor securing it with good American made hose clamps don’t use those cheap Aluminum ones that strip out before you mount your carburetor the space is so freaking tight you will save yourself at least a half an hour and Many expletives! Good luck they are great carburetors. Don’t overlook the Nibbi ignition for $20 and iridium spark plug you’ll never have to change your spark plug ever again!

When you removed the safety latch, did that stop it from turning off after using it? I'm trying to remove an iPad battery so i need to heat the adhesive but the gun keeps turning itself off after about 20 seconds of use. I have to wait like 5 minutes every time it does that

Does the Nibbi carburetor have a choke? The diagram that I’ve read it calls it the starter system and it doesn’t stay on when pulled. I don’t have any experience with these carburetters but I want to put one on my Xpro. Do these carburetters basically take away the need to use choke?

That's what I'm talking about!

I just bought the dlx model. Im having issues getting it started out the box. I bought hoping it will help. Very helpful video

That ratchet is the best on the market for sure!!

Is there a difference in performance since the carb change?

Why does it look small to be a 250

Is this the freak 12v that beats every 12/18-20v out there, including Milwaukee?

How much is it? Worth the price??

Thank you!!!

Just ordered this very elusive love dewalt but they need to wake up on marketing either it will be yellow ecosystem for me even if i to slowly wait for products to be released

hell yeah. I have a 1/4 Mac ,and love it. but I really want the dcf 500.

do you know if the anvil from this ratchet will fit the 20V DCF510? i have a DCF510 that comes with 3/8 and 1/2" anvils. i don't really use 1/4", but i was thinking about getting a set of anvil from one of these tools for my 510. thanks!

😃

Nice review. So the ratchet also comes with that 1/4" hex adapter as well? Cuz i didnt no bout that. Thats pretty sweet. Also was wondering which ratchet is shorter in length from head to front of anvil? Or are they they same? Also i must say i like the idea of the new forward, reverse switch for this new 1 as its like a normal ratchet. The old one was always quite annoying to me if you are in a tight spot and accidentally have the ratchet spinning the wrong way. Also jus cant tell without a tap of the trigger first alot

Great video, thanks for sharing your experience with this ratchet

Nice video, i've ordered one and am waiting for it too arrive. Looks like i won't be disappointed. 😃

you don't need check valves, you are trying to make one BIG tank, right? it's fine like you got it.

I just bought one of these but it doesnt work. Just keeps displaying a 23 on the thermostat readout. Is that the temp. or some sort of error code? There is nothing in the manual. Thanks.

So why are you running them as essentially parallel? The lines can only “take” so much pressure, so it’s not like any line needs both going at once, ever, kinda. I didn’t see a description of your intent in your description. But I assume it’s to get more CFM without going to a bigger horsepower compressor motors. It certainly wasn’t because of price or space, cause you obviously just spent at least $1500 on that pair, at least. And space wise, your setup is easily taking up MORE space than an average commercial shop set-up. I’m doing a garage setup, and I don’t like to disturb my neighbors or my family too much. Especially since I prefer to get deep into the work late at night when people are least likely to interrupt my Zenned out paint and body evolutionary experience. Sometimes dotted with cursing and throwing the odd tool, but that’s very rare. And when I say Zen, I mean seriously absorbing this thing to beat the odds and gain the ability to take care of my friends and family’s vehicles when they get cosmetic issues. And I thought I knew a lot about auto body and paint a year ago. I know plenty about repair, and I’ve done tons of “touch-ups”, and have realized that the ones which turned out well were straight up luck. This is defiantly a skill set where cutting corners and “work-around” dint really exist. Besides the obvious need for meticulous cleaning of the space, and full- tilt decontamination of all potential sources of petroleum or silicon based materials, even old previously opened oil containers or a bottle of polish, unopened, can be risky. That’s what the veteran at my local paint supply said. They said that residue left on the bottle or anywhere in the space can become airborne at any given time, mostly because of the new temp variations and airflow. Since we would never be able to trace these particles in real time, we can only see the evidence of contamination in the form of fisheyes, on what was the cleanest panel you’ve ever seen just before paint. And that’s the problem. There are so many variables that you really have to push hard to deal with every issue if you are gonna have any real chance of getting the results you want from yourself. For example, I’ve painted the hood of my mom’s ML320 with Mercedes 040 Black………so many times I truly lost count. Maybe twenty times, with the fifth time being the LAST TIME, I guaranteed my self. Anyway, I’ve learned a lot. To mitigate orange peel, airflow and mix has got to be dead-on, and also consistent. Even though it SEEMS like the air gun is getting 25psi for twenty minutes straight, it is not, when you have a 2 hp, 5 gallon compressor. So I decided to use my original smaller comp to keep the new bigger one “topped off”, and I still can’t tell how effective the result has been. I have the big one as the one for the paint gun, it’s 26 gallons, and the little one is like 7 gallons and 1.5 hp. I have the regulators on the pumps set so that when the big one falls below a certain pressure, the other one kicks in, “thinking” that the bigger one is a “tool” in need of more air. But the variables of compressed air are too much to really figure my resist.

Be aware guys, these suckers pull A LOT of oxygen!!.....I have a commercial 4-Gas meter, and after 15 minutes, oxygen dips to 20.3%(19.5 is threshold for safety)...and Carbon Monoxide was floating around 10ppm(no big deal) but it took a Long time to clear out!(CO tends to sit low like that, then Quickly Peaks, and then it's Deadly).....but I had the door about 1-foot open too!....granted I was in a 2-car garage, so this heater is Overkill, but just want people to be aware of How much air they can displace!! You definitely need some good air flow.

Thanks for info , I just bought one

10-2 wire is only rated for 30 amps. You need #6 wire to meet code. You don’t need check valves on the tank outlets. It will work just fine without them.

Great job! nice and neat. I can't find the check valves let's see when finished.

Why do you need so much air volume???