Video

Yep. Are you considering getting one?

Thanks! I have the smaller version of this cart too. Of the two, I’d pick this one just because it’s sturdier, though it is bigger. Personally, I like the air filled tires. Are you preferring plastic wheels? Or a different style wheel?

No, unfortunately I haven’t made one. What would you want to see in one?

My guess is that the hose is not attached right or the nut isn’t tight enough. Or there is a leak inside the unit. Mine had not had any issues so I am just guessing.

Will the button depress? Maybe one of the metal sections got bent slightly. I haven’t had a need to fix mine but happy to help if I can.

@jungleriver the button will depress, but it's very stiff... harder than it should be. I don't think any of the sections are bent. At least they don't look bent. I really think it's over extended, but I can't figure out how to fix that.

That’s a matter of preference for sleeping and storage. I’d say for sleeping the thicker the better.

⁠thanks, wrestling between the 4” vs 6” for a disabled camper

I think all mattresses are required to have some sort of fire retardant protection in them. I’m not exactly sure what they use but I would think it is designed that the outer cover would hold any particles in (if there even would be a chance that any could escape). It is a nice mattress and easy to store.

@@jungleriver thank you , I might buy it looks really comfortable

If you read 10cm, then my guess is that means the robot itself. The tower is much higher than that

​@@jungleriver So its useless for people that have furniture. One of the most common heights of sofas is 10cm.

It’s hard to say if a majority of people have issues. Like if you look at Facebook groups, I’d say a lot of people who post are the one with issues but many don’t post positive experiences. I’m not saying people don’t have issues with the DP, I just don’t have a good sense for the percentage. What issue have you had?

I bought 2 DPs, 4 Extra Batteries, a Smart Home Panel (SHP), and a Double Voltage Hub (DVH). Out of these, I've had 3 DPs, 4 SHPs, and 2 DVHs fail. Yes, they have been replaced under warranty. However, I can't rely on them, since they fail so much. I've given up on the SHP and moved to a manual switching panel (10 curcuits).

I’d have to measure it but those specs should be online. Sitting range is subjective, I say. But I like to be pretty close in general.

I wish I knew Arabic to help you.

😂

للتوضيح في منه 3 انواع و سهل جدا للمستهلك انه يتلخبط بينهم و انا للحين احاول افهم الفرق بينهم، و الي ذكرهم في الفيديو اغلى نوع بينه و بين الses حول ال700 درهم اماراتي او ال200 دولار امريكي، و مازلت الاجهزه غاليه و معقده نوعا ما

​@@jungleriverArabic subtitles will definitely get you alot of views we kept robot vacuums a secret from our wives, including dishwashers, i mean it keeps them busy, more work at home less nagging by the time I'm home poor thing is tired, food is ready, so we Arabs kept our wives semi amish, listen forget about the subtitles won't get you any views we got a good thing going won't want to ruin it now

@@SalemMillion

It won’t say directly but you could glean information from the power output (assuming you have about 1000w/m2 of irradiance to compare from factory values). On some solar panels you can easily get to the diodes to test them with a meter or visually inspect.

Since it runs on solar, what if you try to use it indoors, with no sun?

I can’t see why you would use it indoors since you want to ideally test a solar panel on a sunny day. But it doesn’t take much power so indoor lighting on the panel should still give values.

@@jab376 would u test a solar panel indoors with no sun?

EcoFlow sells a double voltage hub, which you need to get to connect 2 DP’s to get 240v output.

I'm eager to give them a try.

Not that I can see.

I am having the same problem with the D2Max. Updated firmware two days after receiving the D2M, then discovered port 2 will not work. I have two Max batteries and only port works after the firmware upgrade. Contacted support and they will via email in 1 to 3 days. Today is day 1.

😮oh no! I'm gonna refrain from updating my firmware period I have an updated any fine stuff since the holidays period I purchased mine and did it all the updates back around thanksgiving when i got them for black Friday ​@RankinImagery

@@NoZenithhow much was the price during the Black Friday price and what which model, delta pro or the 2 max if you are ok with sharing?

Can you tell me more about this? Was it running at the time? Or idle?

@@Mike-. it was up , running and collecting solar when the whole basement filled with smoke. Likely to cause a fire. AGain, careful!

Thank you!

I don’t know what sunken lounge means, sorry!

Yes the eufy app allows you to add another map. You’ll obviously need to move the robot down the steps to the new area Sunken lounge = just an area down some steps

@JoeFoster Thank you for the reply. Do I need to move the home base too? Or just the robot? Thank you

Thanks! Each time I send it out to clean I am impressed by it.

Do you mean if it is sitting on a wood patio? It would be ok because the metal legs keep the firepit off the ground.

No. Thank you for your reply, but I have an Alumawood patio and wanted to burn firewood under the patio which is about 10ft high. Was wondering if it would affect my patio roof.

Gotcha, personally I wouldn’t do that but you can always try and measure how hot the deck gets from underneath. The laser thermometers are not expensive if you don’t have one.

There isn’t a visual camera on it that I am aware of. It uses lidar (laser sensors).

I don’t remember how small it can print but I imagine you can make it pretty small because there is a lot of flexibility

I didn’t try it so I can’t say!

No

I didn’t do anything. It was that way when we purchased the house.

I forget the exact IP rating but basically yes, I would not have fear if it was left out in the rain. I’d say the bigger concern is wind (which usually accompanies storms) and this can get blown over.

I haven’t tried it. My google home device bricked after a firmware update.(something I’m upset about and google wont fix)

Thanks for watching! If you get the extra battery then you will get extra capacity (run time). The UPS feature would still be the same as on the Delta Pro.

Can we do mopping and cleaning at the same time itself?

There is a version of this robot that comes with a mop attachment. It clicks on the bottom.

I don’t remember off hand but it was in the instructions

I haven’t found there to be a problem putting it back in the bag. What aspect would you want to see?

No, unfortunately

It was custom made by my uncle, sorry!