Video

on 16:12 why to use command int vlan x for each vlan? pls explain it briefly.Thanks

Thank you for this! All I wanted to know if we could use the ip helper-address command on cisco routers when the DHCP server was also a cisco router, and I also wasn't sure exactly what address to specify on the neighbouring routers. I found plenty of other information out there on configuring dhcp relay with that command, but all the examples were using an actual DHCP server (not a router) which had a single static IP address. So in those cases it was easy to work out what ip to put after the ip helper-address command. But in my case I have a router being the dhcp server, connected to 2 other routers on either side, and 6 separate subnets to give dhcp to. It wasn't immediately clear to me what IP to specify when the dhcp router has multiple interfaces to various networks, and which interfaces to use the commands on. Your explanation really cleared all of that up for me and showed it is possible, so thank you!! Got my lab working too all green lights and DHCP working!

Thank you for the tutorial. Just a tip if anyone has trouble in making it works. 10:58 in the newer version of packet tracer 8.2.2, the service-policy command is added already. Proceeding will cause a warning and prevent the policy working, delete it first by putting "no" keyword in the front.

Thanks a lot, I really benefited much from this video .By the way, this the area description of my graduation project ,you can add videos if possible more with a complex topology

Grüße gehen raus an Saggi

this is a nice example but i cant seems to follow with my packet tracer to continue from where you start , thanks anyway for the demonstration.

Really good vid. Thanks for the walkthrough!

Thanks men but I have a question

Perfectly Clear Instruction, Kudos Saleh

Can you show us how to configure the actual layer3 switch.

This is a good tutorial on BGP but for beginners, it's probably a lot easier to just configure OSPF. I think only advanced class of network engineers would get a chance to tinker with border routers.

The network is /24 and /30 .. How can the network see each other ?

Thanks for this. Just finished my A+ and working on Network+ but using packet tracer for labs.

Question is why enabled int vlan 10,20,30 on all the access switches? It could be just vlan 10,20,30 and assigned edge devices but why int vlan 10,20,30 on access switches when we don't assign then ips,????? Any reasons for it? Int vlan 10,20,30 should be defined on layer3 switch but why on access?????

Thanks!!!

I want to write to other people who will watch this tutorial, don’t watch it - it doesn’t work. This guy glued it together somewhere in the middle and everything works for him. All the other dudes who wrote here were either bought or bots. The real comments that are here also encountered a problem, in the end he sends them to the stolen manual. Conclusion - don't watch.

Good teachings

thank ya 3alami <3

Thank you for the video .

Thanks sir, this is very helpful to follow step-by-steps

You have no idea on how big of a help this lesson is to me. I have cracked my skull trying to find a solution to why my DHCP request failed in another subnet from the subnet that contains the DHCP server, despite providing the IP helper-address. Now I know that I need to configure the static routing between the networks. And you showed me how to do it with great detail and precision. Thank you ❤😊

Hello, Many Thanks for this lab it's very well explained and the word document for equipment configuration helps us a lot Many Thanks Regards

You have not verified the VPN connectivity in the end

your tutorial is great. it helped a lot. but need to mention that your voice and sounds of your mouth and stomach and breath is very ugly to hear. not nice. please adjust that. we can hear you are breathing and burping , licking and it is very unpleasant to hear. thanks

thank you so much. I am preparing for my practical exam and this sure will help me .

hi how can use ip helper-address for same dhcp and vlan on different router? I tried but not working. can I get help?

Thanks

i have hard hemeroids

May God bless you.Simple to understand

اسطورة ❤

I can't ping the dns icmp and http just like other problems that i read in the comment. does anyone tell me whats the problem? or maybe the version of his packet tracer is outdated? coz im using updated maybe thats the reason?

Great video!!! I have noticed that not many people show how to configure the router or the Layer 3 Switch to be a DHCP Server. The only thing that video lacked was showing how to make the L3 Switch to also be the DHC Server of the network

Thank you very much

hi , i have similar lab . but in my lab i have about 6 VLANs on both HQ LAN and Branch LAN . and they both should be able to access DMZ servers. how do i configure this on ASAs ? thanks so much

Thank you sir, very helpful

i can't ping anything outside the firewall despite that i followed your steps from A to Z including using the same ip addresses that you used here but yet i can't ping my router and server, i got all these (dns, http and icmp) in my server but yet i can i not ping server from inside pc . What should i do next

Thank you so much, I am testing in a couple of days and I have been worried sick. This video has been so helpful, I have it on repeat

thanks for this video, it short with great meaning and impacts

very well explained. Great video!🙏👏🤜

Why use 3 switches? I mean why cant just connect the two switches directly to the L3 switch? Please give reason why?

Excellent presentation and no other videos can match the information you have provided!

Thanks, this is what i was looking for.

All praise due to you for this video

Where can I find the full video?

Excellent tutorial dear Sir. Love it.

i have question, is it really necessary to enable interface vlan on the access switch that is not in use? Here the management is VLAN 99 and it should be the only activated interface vlan on the remote switches.

well done thank you

Good morning. This is one educational video. I have learnt a lot. Well done

does this ASA support IP phone configurations ?

hi, does cisco ASA support for IP telephony- service ? i mean can we use ASA for cisco IP phones configuration without using a router ? thanks