Target Forge
Target Forge
  • 135
  • 480 279
Overcoming Adversity in Competitive Shooting | RMAC 2024 Insights with John Rupple, Bill and Pat
In this compelling episode of "The Airgun Geeks Channel," we dive deep into the mind of a competitive shooter with the insightful John Rupple and Bill Ruehl. Recorded at the epic RMAC 2024, John shares his candid story of experiencing equipment failure during a crucial moment and the mental hurdles that followed. This video is a must-watch for anyone looking to understand the psychological challenges of competitive shooting and how to maintain your edge in the face of adversity.
Join us as John and Bill discuss strategies to overcome self-doubt, the importance of mental resilience, and what future shooters can learn from John's experience. Whether you're a seasoned competitor or just starting out, this video offers valuable lessons that extend beyond the range and into everyday life.
Make sure to check out the affiliate links below! Your support through these links helps keep our channel running and brings you more valuable content.
Affiliate Links That Support The Work We Do Here!
Use our link and visit Airgun Depot! app.rockporch.com/mlink/372?userId=140361
CS2 - amazon.rockporch.com/prdlink/UBed3CCDvC
CS2 L2 (Battery Powered)- amazon.rockporch.com/prdlink/DLgZx6QxCT
CS3 - amazon.rockporch.com/prdlink/nYp6zRhSOu
CS3i- amazon.rockporch.com/prdlink/JNULlImjtd
CS3 L3 (Battery Powered) - amazon.rockporch.com/prdlink/UVZP8sYOVV
CS4 - amazon.rockporch.com/prdlink/DPZTX4fHQM
CS4i - amazon.rockporch.com/prdlink/JQbFdsXagP
The “i” versions have the AC power supply built into the chassis and can run on 12VDC as well.
Hashtags:
#CompetitiveShooting #RMAC2024 #MentalResilience #AirgunGeeks #ShootingSports #OvercomingAdversity #MindsetMatters #SportsPsychology #KeepYourEdge #JohnRupple #BillRuehl #ShootingEquipment #AffiliateMarketing #SupportOurChannel #LearnAndImprove
Call to Action:
Don't miss out on the valuable insights shared in this video! Like, subscribe, and hit the notification bell to stay updated with all our content. If you found this video helpful, please share it with fellow shooters and enthusiasts. And remember, using the affiliate links below supports our channel and helps us bring you more great content. Thank you for your support!
Join this channel to get access to perks:
czcams.com/channels/nEWK-YykT9-uf1F49Xnqig.htmljoin
Affiliate Links That Support The Work We Do Here!
Use our link and visit Airgun Depot! app.rockporch.com/mlink/372?userId=140361
CS2 - amazon.rockporch.com/prdlink/UBed3CCDvC
CS2 L2 (Battery Powered)- amazon.rockporch.com/prdlink/DLgZx6QxCT
CS3 - amazon.rockporch.com/prdlink/nYp6zRhSOu
CS3i- amazon.rockporch.com/prdlink/JNULlImjtd
CS3 L3 (Battery Powered) - amazon.rockporch.com/prdlink/UVZP8sYOVV
CS4 - amazon.rockporch.com/prdlink/DPZTX4fHQM
CS4i - amazon.rockporch.com/prdlink/JQbFdsXagP
The “i” versions have the AC power supply built into the chassis and can run on 12VDC as well.
Support me on Patreon to help fund the work done on this channel:
Patreon Link: www.patreon.com/targetforge
zhlédnutí: 196

Video

Ultimate Shootout at RMAC 2024! New Airguns Unveiled & Exclusive GX Compressor Tips
zhlédnutí 944Před měsícem
Join us on the Airgun Geeks Podcast as we dive into the action at the Rocky Mountain Airgun Challenge 2024 with our special guest, Justin Jacobson of Utah Airguns. Discover the latest thrills and spills from one of the year's biggest competitive shooting events. 🎯 Pat reveals his latest airgun wins and the game-changing features that set them apart. Plus, don’t miss out as Bill unveils a ground...
Uncovering Scheels: The Ultimate Online Store for Dads & Outdoorsmen! 🌟🔍 #GiftsForDad #OutdoorGear
zhlédnutí 184Před měsícem
Hey everyone, it's Bill Ruehl! I just had an incredible experience exploring Scheels online, and I discovered a treasure trove of products perfect for dads, men, hunters, shooters, and outdoors enthusiasts. From Ace Hardware tools to Zebco fishing gear, Scheels has it all! 🎣🛠️ Whether you're looking for the perfect gift for Father's Day, need some new gear for your next adventure, or just love ...
INEXPENSIVE DIY Bench bags! Let's look at some fill options! Part 2
zhlédnutí 484Před měsícem
Join us on Target Forge as we dive deeper into the world of DIY bench bags! Building on our popular video on inexpensive DIY bench bags, this episode features specialized fill materials provided by SpexLite, designed to enhance your shooting experience. Whether you're using guns, airguns, or firearms, finding the right fill material can make all the difference. We test three unique options: a s...
🔌 Top Test Leads for Every Toolbox! | Target Forge Tests Budget-Friendly Flexibility 🔥
zhlédnutí 154Před 2 měsíci
Discover the ultimate in flexibility and reliability with our deep dive into these budget-friendly, high-quality test leads! Ideal for the seasoned DIYer, handyman, or professional working on automotive or motorcycle repairs, commercial electrical projects, or any electronic tinkering. 🚗🏍️🔧 These test leads set themselves apart with their extreme flexibility and variety of probe attachments, fi...
🏹 Ultimate Backyard Target Solution | Zip Range by Zip Targets Review
zhlédnutí 457Před 2 měsíci
Transform your backyard into the ultimate shooting range with the Zip Range by Zip Targets! Our in-depth review covers its superb quality, smart design, and affordability. This versatile target system is ideal for shooters, archers, slingshot enthusiasts, and all marksmen. With easy setup and takedown, it's perfect for any backyard. Support Target Forge by using the affiliate links below and ta...
Shots & Giggles with PJ Clarke! 😂 | Behind the Red Panda & Covering Key Media Events as a YouTuber!
zhlédnutí 282Před 2 měsíci
🎉 Dive into a hilarious new episode of The Airgun Geeks Podcast! Join hosts Bill Ruehl and Patrick as they welcome PJ Clarke, famously known as "Wisconsin Airgunner," for a lively discussion on airguns and pivotal outdoor events. 🌲🎯 🌟 In this jam-packed episode: Explore the innovation behind the Red Panda by Karma Airguns-how is this new marvel reshaping the world of benchrest shooting? Get exp...
🚨 Urgent Update: GX CS4-I Compressors Back in Stock! Secure Yours Now! GREAT PCP Airgun Gear 2024
zhlédnutí 726Před 2 měsíci
🚨 BREAKING NEWS for all airgun enthusiasts! The highly sought-after GX CS4-I Compressors are returning this May 2024! Don’t miss your chance to elevate your airgun experience with the best in the game! 🌟 🔥 Act fast to claim your GX CS4-I Compressor-the ultimate tool for any serious airgun hobbyist or sport shooter. This is the power boost your airgun needs for unmatched performance. Stocks are ...
The Urban Airgunner Rides Again! | Exclusive Comeback Interview with Rick Ward
zhlédnutí 254Před 3 měsíci
The Urban Airgunner Rides Again! | Exclusive Comeback Interview with Rick Ward
FX DRS Reveal: Exclusive with Johan Axelsson + Giveaway & DIY Maker intro #FXAirguns #FXDRS #airgun
zhlédnutí 1,4KPřed 3 měsíci
FX DRS Reveal: Exclusive with Johan Axelsson Giveaway & DIY Maker intro #FXAirguns #FXDRS #airgun
2024 Airgun Hunting Explored! Chris Turek & Rick Rehm Break New Ground Airgun Geeks Podcast
zhlédnutí 289Před 4 měsíci
2024 Airgun Hunting Explored! Chris Turek & Rick Rehm Break New Ground Airgun Geeks Podcast
Breaking Barriers with the Red Panda Inside Karma Airguns Journey to Triple Crown IWA 2024 Exclusive
zhlédnutí 974Před 4 měsíci
Breaking Barriers with the Red Panda Inside Karma Airguns Journey to Triple Crown IWA 2024 Exclusive
Install the Essential Flow Indicator Kit on Your CS4-I GX Compressor: A Step-by-Step Guide!
zhlédnutí 1KPřed 4 měsíci
Install the Essential Flow Indicator Kit on Your CS4-I GX Compressor: A Step-by-Step Guide!
Introducing the ALL new GX CS4-I High Pressure air solution for your PCP!
zhlédnutí 6KPřed 4 měsíci
Introducing the ALL new GX CS4-I High Pressure air solution for your PCP!
Giles Barry Unleashed Inside Airgun 101 & Beyond Airgun Geeks
zhlédnutí 282Před 4 měsíci
Giles Barry Unleashed Inside Airgun 101 & Beyond Airgun Geeks
Thayne Simmons Dominates 2023's Biggest Airgun Benchrest Competitions with the Red Panda
zhlédnutí 934Před 4 měsíci
Thayne Simmons Dominates 2023's Biggest Airgun Benchrest Competitions with the Red Panda
Global Airgun Adventures: From Michigan to Shenzhen and Beyond!
zhlédnutí 187Před 5 měsíci
Global Airgun Adventures: From Michigan to Shenzhen and Beyond!
Meet the New 2024 Umarex Zelos: The Future of Airguns in .22 & .25 Caliber
zhlédnutí 9KPřed 5 měsíci
Meet the New 2024 Umarex Zelos: The Future of Airguns in .22 & .25 Caliber
Crosshairs United: The Airgun Geeks Explore the Convergence of Firearms and Airguns
zhlédnutí 173Před 5 měsíci
Crosshairs United: The Airgun Geeks Explore the Convergence of Firearms and Airguns
Revolutionize Your Shooting: Unveiling JSB/Predator 2024's Latest Pellets & Slugs
zhlédnutí 1,3KPřed 5 měsíci
Revolutionize Your Shooting: Unveiling JSB/Predator 2024's Latest Pellets & Slugs
Introducing the Revolution: Skout Airguns Evo Unleashed
zhlédnutí 2KPřed 5 měsíci
Introducing the Revolution: Skout Airguns Evo Unleashed
Umarex Iconix New for 2024 #shotshow2024 #airgun #umarex #airgungeeks
zhlédnutí 1,8KPřed 6 měsíci
Umarex Iconix New for 2024 #shotshow2024 #airgun #umarex #airgungeeks
Compressor trip update from Nantong!
zhlédnutí 775Před 6 měsíci
Compressor trip update from Nantong!
A Newcomer's Journey into Airguns: Kayla Nevius' Story #podcast #airgun #airrifleshooting
zhlédnutí 556Před 7 měsíci
A Newcomer's Journey into Airguns: Kayla Nevius' Story #podcast #airgun #airrifleshooting
Building the Ultimate Notos Part 2 Plenum Kit Install #airgun #umarex #plenum
zhlédnutí 17KPřed 7 měsíci
Building the Ultimate Notos Part 2 Plenum Kit Install #airgun #umarex #plenum
Building the Ultimate Notos! Part 1: Base Accuracy
zhlédnutí 1,8KPřed 8 měsíci
Building the Ultimate Notos! Part 1: Base Accuracy
Airgun Optics Odyssey! Zooming into the Right Choice... #podcast #airgun #scope #optic #crosshair
zhlédnutí 343Před 8 měsíci
Airgun Optics Odyssey! Zooming into the Right Choice... #podcast #airgun #scope #optic #crosshair
Shhh...We're Talking Silencers! Ft. The Wisconsin Airgunner & Tom from Impulse Air #podcast #airgun
zhlédnutí 378Před 8 měsíci
Shhh...We're Talking Silencers! Ft. The Wisconsin Airgunner & Tom from Impulse Air #podcast #airgun
New to PCP? How to Choose the Perfect High-Pressure Compressor
zhlédnutí 9KPřed 9 měsíci
New to PCP? How to Choose the Perfect High-Pressure Compressor
Revolutionize Your GX CS4: Get the Ultimate Coolant Flow Indicator #gx #cs4 #airgun #compressor
zhlédnutí 2,6KPřed 9 měsíci
Revolutionize Your GX CS4: Get the Ultimate Coolant Flow Indicator #gx #cs4 #airgun #compressor

Komentáře

  • @BostonWhoFan515
    @BostonWhoFan515 Před 4 dny

    Bill, I desperately need your input. I just got this compressor. I'm only filling guns with standard HPA tubes, not small tanks, directly. There isn't any sort of filter on this unit. I don't think it has an inner filter either, like the Benjamin Recharge, which is similar in many ways. Is the CS4-I safe to fill guns directly as is, or should I get a small inline filter? I'm guessing the huge Tuxing molecular seive filter would probably be a bit overkill to fill guns, right? Right now, I'm just refilling my guns after shooting and bringing them back up to full. A very short charge. I hope I'm not dumping moisture into these guns now. Thanks in advance. I appreciate your time. Cheers.

  • @billreeves7128
    @billreeves7128 Před 4 dny

    Long winded

  • @beh4852
    @beh4852 Před 5 dny

    327

  • @user-pq5jd1fu3n
    @user-pq5jd1fu3n Před 5 dny

    Una copia del snowpeak m60

  • @Alloutairguns
    @Alloutairguns Před 5 dny

    Sir quick question on the Gx-Cs4 while emptying my water reservoir a few drops got on the temperature sensor where the thermal paste is a little putty like and hasn’t dried up so I want to know if you sell the paste or have any advice for this situation. It was only a couple drops nothing major putty is still there but still tacky on top part 2 weeks later

    • @TargetForge
      @TargetForge Před 5 dny

      I would not worry about it, I don't know for sure if that compound ever truly hardens. I do not stock that compound and I do not recommend removing it.

    • @Alloutairguns
      @Alloutairguns Před 5 dny

      @@TargetForge ok thank you sir!

  • @ravenshield7823
    @ravenshield7823 Před 5 dny

    They need to start separating the contests by caliber. It's a substitute for skill and everything else that is involved with knowing your gun. The best shooter on the worst gun will never win. I don't have any skin in the game, but it takes away from the interest of it since you gotta have certain gear more than anything else. It's like comparing the sub 12 guys to FAC guy in a range contest. Youd probably get more people involved with caliber classes also. These competitions are more of a marketing ploy than a legitimate skills competition, at this point, in my opinion. Not that there aren't great shooters there but make it fair for the people that aren't sponsored and get given everything for advertisement. You talk about raising the bar, but that bar has nothing to do with raising the skill. It's become a bullshit competition unless all else is equal. The sales pitch is getting old. It's just going to be a niche thing that has to prop itself up without separation of caliber.

  • @ravenshield7823
    @ravenshield7823 Před 5 dny

    Triple crown

  • @DREKOWICK69
    @DREKOWICK69 Před 5 dny

    does she come with the compressor?

  • @kcfyrproof4919
    @kcfyrproof4919 Před 6 dny

    Where can you buy the erector set fastener ?

    • @TargetForge
      @TargetForge Před 6 dny

      Right on the Target Forge website! Here is a link: targetforge.net/shop/ols/products/34-emt-conduit-hardware/v/3-4-EMT-CND-HRD-FOR

    • @kcfyrproof4919
      @kcfyrproof4919 Před 6 dny

      @@TargetForge Thanks so much

  • @NickM-x2t
    @NickM-x2t Před 8 dny

    thanks for the tip as i wrapped all the tubes and what a difference it really makes

  • @victoradams6635
    @victoradams6635 Před 9 dny

    I have a cs4-I compressor that I am having problems with. When I set the pressure for a certain psi or bar, the compressor arrow will not stop filling and I have to turn the unit off before something bad happens. Can you help me diagnose this problem?

  • @kcfyrproof4919
    @kcfyrproof4919 Před 9 dny

    where's part 2 ???

    • @TargetForge
      @TargetForge Před 9 dny

      Right where I left it... czcams.com/video/NAz4MXB0qVA/video.html

  • @stevengoodman3498
    @stevengoodman3498 Před 9 dny

    Can't wait to install the flow indicator light in mine. Thanks Bill!😊

  • @DREKOWICK69
    @DREKOWICK69 Před 10 dny

    how long would it take to fill up a 77/4500>?

    • @TargetForge
      @TargetForge Před 10 dny

      From Zero or just a top off?

    • @TargetForge
      @TargetForge Před 10 dny

      It would also help to include the units with your values. Help me make sure my conversions are sound. You are possibly a paintball guy? So 77 cubic inches?

    • @TargetForge
      @TargetForge Před 10 dny

      Based on some assumptions, a fill on your pony bottle from 0 psi to 4500 psi would be just over 30 minutes. If you had a larger vessel and kept it at 4500 you could "cascade" fill, or get ~85% of the fill done in a minute or so and use the pump to finish the fill really quick.

    • @DREKOWICK69
      @DREKOWICK69 Před 10 dny

      @@TargetForge thanks, I think it is actually 77cubic ft if I am not mistaken

    • @TargetForge
      @TargetForge Před 10 dny

      @@DREKOWICK69 it might be better if we reverted to physical dimensions. What is the diameter and length of the bottle? Are you an Airgun guy? Or a paint ball guy?

  • @ppcastro
    @ppcastro Před 12 dny

    Too big

  • @Diablorodandgun
    @Diablorodandgun Před 13 dny

    Ok Bill- will you be purchasing one? If you get one, I wlll too- FT match in Concord with them!

  • @bertdefauw
    @bertdefauw Před 16 dny

    Whats the best filter for the ac2 . Thanks and greetz

    • @TargetForge
      @TargetForge Před 15 dny

      Since this machine is oil free and has in input particulate filter a "filter" really isn't a requirement. That being said, an effective moisture separator that has valves that can contain pressure safely, would be a great solution. There are a few on the market, but there volume is a bit large, and they are expensive. I have been trying to work some manufacturers to bring a solution to market, no luck yet.

  • @user-lo1kw8yl3i
    @user-lo1kw8yl3i Před 16 dny

    So little water I’m amazed it cools anything

    • @TargetForge
      @TargetForge Před 15 dny

      It is my understanding that the VOLUME of water does not determine the effectiveness of a good cooling system. Moving heat from point A, to point B efficiently IS what defines an effective cooling system. Also, the rate of heat input fluctuation on a system with fixed parameters does not benefit from a large thermal mass. Thank you for your comment! Hope your pellets fly true!

    • @user-lo1kw8yl3i
      @user-lo1kw8yl3i Před 15 dny

      Thanks

  • @Diablorodandgun
    @Diablorodandgun Před 17 dny

    You're going to get us in trouble Bill!

    • @wruehl
      @wruehl Před 17 dny

      How is that my friend?

  • @bertdefauw
    @bertdefauw Před 17 dny

    New to pcp guns. bought myself an avenge-x and gx cs2 as first toys. So long story short. The ideal gx setup, is with the tuxing molecular sieve vertical.only downpoint is that its gonna take longer to pump,right? Greetz from belgium

    • @TargetForge
      @TargetForge Před 15 dny

      Your solution will result in a LOT of additional time on the pump as that volume will need to be filled each time. Also not having a true coalescer or moisture separator before the media means that you will consume media at a fantastic rate. Thank you for your comment.

  • @TargetForge
    @TargetForge Před 18 dny

    Smokeless Fire Ring 15" - www.amazon.com/dp/B0CXSMFQ7D?ref=t_ac_view_request_product_image&campaignId=amzn1.campaign.145WWBG4O4T5A&linkCode=tr1&tag=targetforge05-20&linkId=amzn1.campaign.145WWBG4O4T5A_1721347652345 - Using this link supports The Target Forge Channel! Amazing Fire Starter! - www.amazon.com/dp/B08H1Q5XQV?ref=t_ac_view_request_product_image&campaignId=amzn1.campaign.2HX8XHISUETZF&linkCode=tr1&tag=targetforge05-20&linkId=amzn1.campaign.2HX8XHISUETZF_1721347569829 - Using this link supports The Target Forge Channel!

  • @Edsoutdoors
    @Edsoutdoors Před 21 dnem

    Can you tell me if this black disk belongs in the bottom of the grease pot.? Thanks Ed

    • @wruehl
      @wruehl Před 21 dnem

      Yes it does

    • @Edsoutdoors
      @Edsoutdoors Před 21 dnem

      @@wruehl mine was all bunched up inside the pot, I took it out and cleaned it, and then put it at the bottom, laid flat..

    • @TargetForge
      @TargetForge Před 21 dnem

      Good work!

    • @Edsoutdoors
      @Edsoutdoors Před 21 dnem

      Also I had to turn the grease non 4 full turns before the grease was flush with the bottom of the removable pot, All is good now 👍

  • @WiscAirGunners
    @WiscAirGunners Před 21 dnem

    Great interview with one of the original Wisconsin AirGunners!

    • @TargetForge
      @TargetForge Před 21 dnem

      Thank you PJ! Speak of the devil and he appears... Lol.

    • @WiscAirGunners
      @WiscAirGunners Před 20 dny

      @@TargetForge well, i guess there is something to that.

  • @TiredMachine
    @TiredMachine Před 21 dnem

    Bill & Patrick in the morning Great stuff and interview with John Rupple was outstanding. I'm looking forward to the interview with Jason from dead lead air. I talked with Jason back in April about a Corbin Swage Press after talking with Jason I bought one. Jason was honest and helpful with tips and tricks to get me started making my own slugs. Now all I need is a break in the Heat here so I can try them out. Thanks again Bill & Patrick for all you do. Cheers from the desert SW USA!

  • @ianprice2441
    @ianprice2441 Před 22 dny

    Looks great!

  • @jackmclane1826
    @jackmclane1826 Před 22 dny

    Does anyone know how this pump operates? There is what it looks like just a single pump cylinder in there. Single step to 300 bars is odd!

    • @wruehl
      @wruehl Před 22 dny

      We do Jack, inside that "single" round enclosure are actually 3 progressive compression assemblies. Very clever design. Do not take it apart! Assembly is a bear. Go fly some pellets!

  • @jamesperkins343
    @jamesperkins343 Před 23 dny

    Hello from Texas, I watched your past videos in-order to purchase my PCP air compressor over a year ago. I bought the GX CS4, it has been a great machine. I have a question on the grease port or pot. I looked for a breakdown on the grease pot and how it is assembled. Because,,,,, I unscrewed my pot to see how it works..... ummm, there was a rubber seal in the bottom with no holes to let grease in the little grease port...... is this correct for a rubber seal to be over the hole? Now that I have showed all my mistake, could you give a breakdown on how it is supposed to be put together correctly and explain how the grease gets past the rubber seal? Thanks

    • @TargetForge
      @TargetForge Před 23 dny

      Just put it back together exactly as it came apart and DO NOT MODIFY the rubber disk, there is nothing wrong with it. It is designed to limit the amount of grease that enter the system in case someone starts cranking on the knob. Also be sure to NOT mix a grease of unknown compatibility in the pot, Target Forge sells the exact same grease that came in your unit from the factory, and truth be told that grease for a sliding application is really good.

  • @TargetForge
    @TargetForge Před 25 dny

    Affiliate Links That Support The Work We Do Here! Use our link and visit Airgun Depot! app.rockporch.com/mlink/372?userId=140361 CS2 - amazon.rockporch.com/prdlink/UBed3CCDvC CS2 L2 (Battery Powered)- amazon.rockporch.com/prdlink/DLgZx6QxCT CS3 - amazon.rockporch.com/prdlink/nYp6zRhSOu CS3i- amazon.rockporch.com/prdlink/JNULlImjtd CS3 L3 (Battery Powered) - amazon.rockporch.com/prdlink/UVZP8sYOVV CS4 - amazon.rockporch.com/prdlink/DPZTX4fHQM CS4i - amazon.rockporch.com/prdlink/JQbFdsXagP The “i” versions have the AC power supply built into the chassis and can run on 12VDC as well.

  • @TargetForge
    @TargetForge Před 25 dny

    Affiliate Links That Support The Work We Do Here! Use our link and visit Airgun Depot! amazon.rockporch.com/mlink/372?userId=140361 CS2 - amazon.rockporch.com/prdlink/UBed3CCDvC CS2 L2 (Battery Powered)- amazon.rockporch.com/prdlink/DLgZx6QxCT CS3 - amazon.rockporch.com/prdlink/nYp6zRhSOu CS3i- amazon.rockporch.com/prdlink/JNULlImjtd CS3 L3 (Battery Powered) - amazon.rockporch.com/prdlink/UVZP8sYOVV CS4 - amazon.rockporch.com/prdlink/DPZTX4fHQM CS4i - amazon.rockporch.com/prdlink/JQbFdsXagP The “i” versions have the AC power supply built into the chassis and can run on 12VDC as well.

  • @TargetForge
    @TargetForge Před 25 dny

    Affiliate Links That Support The Work We Do Here! Use our link and visit Airgun Depot! amazon.rockporch.com/mlink/372?userId=140361 CS2 - amazon.rockporch.com/prdlink/UBed3CCDvC CS2 L2 (Battery Powered)- amazon.rockporch.com/prdlink/DLgZx6QxCT CS3 - amazon.rockporch.com/prdlink/nYp6zRhSOu CS3i- amazon.rockporch.com/prdlink/JNULlImjtd CS3 L3 (Battery Powered) - amazon.rockporch.com/prdlink/UVZP8sYOVV CS4 - amazon.rockporch.com/prdlink/DPZTX4fHQM CS4i - amazon.rockporch.com/prdlink/JQbFdsXagP The “i” versions have the AC power supply built into the chassis and can run on 12VDC as well.

  • @TargetForge
    @TargetForge Před 25 dny

    Affiliate Links That Support The Work We Do Here! Use our link and visit Airgun Depot! amazon.rockporch.com/mlink/372?userId=140361 CS2 - amazon.rockporch.com/prdlink/UBed3CCDvC CS2 L2 (Battery Powered)- amazon.rockporch.com/prdlink/DLgZx6QxCT CS3 - amazon.rockporch.com/prdlink/nYp6zRhSOu CS3i- amazon.rockporch.com/prdlink/JNULlImjtd CS3 L3 (Battery Powered) - amazon.rockporch.com/prdlink/UVZP8sYOVV CS4 - amazon.rockporch.com/prdlink/DPZTX4fHQM CS4i - amazon.rockporch.com/prdlink/JQbFdsXagP The “i” versions have the AC power supply built into the chassis and can run on 12VDC as well.

  • @TargetForge
    @TargetForge Před 25 dny

    Affiliate Links That Support The Work We Do Here! Use our link and visit Airgun Depot! amazon.rockporch.com/mlink/372?userId=140361 CS2 - amazon.rockporch.com/prdlink/UBed3CCDvC CS2 L2 (Battery Powered)- amazon.rockporch.com/prdlink/DLgZx6QxCT CS3 - amazon.rockporch.com/prdlink/nYp6zRhSOu CS3i- amazon.rockporch.com/prdlink/JNULlImjtd CS3 L3 (Battery Powered) - amazon.rockporch.com/prdlink/UVZP8sYOVV CS4 - amazon.rockporch.com/prdlink/DPZTX4fHQM CS4i - amazon.rockporch.com/prdlink/JQbFdsXagP The “i” versions have the AC power supply built into the chassis and can run on 12VDC as well.

  • @TargetForge
    @TargetForge Před 25 dny

    Affiliate Links That Support The Work We Do Here! Use our link and visit Airgun Depot! amazon.rockporch.com/mlink/372?userId=140361 CS2 - amazon.rockporch.com/prdlink/UBed3CCDvC CS2 L2 (Battery Powered)- amazon.rockporch.com/prdlink/DLgZx6QxCT CS3 - amazon.rockporch.com/prdlink/nYp6zRhSOu CS3i- amazon.rockporch.com/prdlink/JNULlImjtd CS3 L3 (Battery Powered) - amazon.rockporch.com/prdlink/UVZP8sYOVV CS4 - amazon.rockporch.com/prdlink/DPZTX4fHQM CS4i - amazon.rockporch.com/prdlink/JQbFdsXagP The “i” versions have the AC power supply built into the chassis and can run on 12VDC as well.

  • @TargetForge
    @TargetForge Před 25 dny

    Purchase your here! - amzn.to/3ULQt0S Join this channel to get access to perks: czcams.com/channels/nEWK-YykT9-uf1F49Xnqig.htmljoin Affiliate Links That Support The Work We Do Here! Use our link and visit Airgun Depot! amazon.rockporch.com/mlink/372?userId=140361 CS2 - amazon.rockporch.com/prdlink/UBed3CCDvC CS2 L2 (Battery Powered)- amazon.rockporch.com/prdlink/DLgZx6QxCT CS3 - amazon.rockporch.com/prdlink/nYp6zRhSOu CS3i- amazon.rockporch.com/prdlink/JNULlImjtd CS3 L3 (Battery Powered) - amazon.rockporch.com/prdlink/UVZP8sYOVV CS4 - amazon.rockporch.com/prdlink/DPZTX4fHQM CS4i - amazon.rockporch.com/prdlink/JQbFdsXagP The “i” versions have the AC power supply built into the chassis and can run on 12VDC as well.

  • @TargetForge
    @TargetForge Před 25 dny

    You can help support the channel at NO COST to you! Affiliate link - amzn.to/4cyLlF9

  • @TargetForge
    @TargetForge Před 25 dny

    Affiliate Links That Support The Work We Do Here! Use our link and visit Airgun Depot! amazon.rockporch.com/mlink/372?userId=140361 CS2 - amazon.rockporch.com/prdlink/UBed3CCDvC CS2 L2 (Battery Powered)- amazon.rockporch.com/prdlink/DLgZx6QxCT CS3 - amazon.rockporch.com/prdlink/nYp6zRhSOu CS3i- amazon.rockporch.com/prdlink/JNULlImjtd CS3 L3 (Battery Powered) - amazon.rockporch.com/prdlink/UVZP8sYOVV CS4 - amazon.rockporch.com/prdlink/DPZTX4fHQM CS4i - amazon.rockporch.com/prdlink/JQbFdsXagP The “i” versions have the AC power supply built into the chassis and can run on 12VDC as well.

  • @spclarryy
    @spclarryy Před 25 dny

    Have the same compressor and my temps are not even close to yours, my water temp always settles in at about 140-144

    • @TargetForge
      @TargetForge Před 25 dny

      Interesting, Differences in measurement method and ambient air temp can create a delta in values. What was your ambient? How are you measuring the temp? How high was your fill pressure?

    • @spclarryy
      @spclarryy Před 25 dny

      @@TargetForge ambient temp was around 75 degrees, using a probe directly in the coolant. Temperature definitely climbs slower at lower pressures as I filled a large bottle from zero to 4500 PSI. Even lower pressures made it to 140 F after 20 minutes or so. I’d only run it for about an hour at a time to allow it to cool off. I have 9 and a half hours on the machine and it’s ran great. Just worried its getting to hot.

    • @TargetForge
      @TargetForge Před 25 dny

      @@spclarryy First, I don't think ~20 degrees is a very big delta. Are you using coolant or water?

    • @spclarryy
      @spclarryy Před 25 dny

      @@TargetForge im using RV antifreeze

    • @TargetForge
      @TargetForge Před 25 dny

      YATZEE! We have our answer! RV antifreeze is not very good at moving heat through a system. Not a wise choice for a cooling system. Try your test again with water and let us know what your measurements are.

  • @kevster8740
    @kevster8740 Před 25 dny

    Do you have a link to that charger?

    • @TargetForge
      @TargetForge Před 25 dny

      Should be in the video description as well, thank you for asking! Check 'em out here - www.amazon.com/dp/B0CXXPYZ4Z?ref=t_ac_view_request_product_image&campaignId=amzn1.campaign.2QKU9WSAI90SE&linkCode=tr1&tag=targetforge05-20&linkId=amzn1.campaign.2QKU9WSAI90SE_1720565043636

  • @skweekykleane9810
    @skweekykleane9810 Před 26 dny

    Howdy sir. David here. Got the CS3 model. Sprayed the Dish soap & Isopropyl Alcohol mix at the locations you shared. No leaks. In your vid, you point to the OCV (Outlet Check Valve), located at the bottom of the CS2 model. Is the OCV the same as the Burst Disk, on the CS3 model, or, is it the unmarked (on mine) nut, at the bottom, behind the Burst Disk? Presuming it's not the Safety Valve, up on top of the CS3 model...(?) Thanx, David

    • @TargetForge
      @TargetForge Před 25 dny

      Hello David, you might consider booking a session with me on the Target Forge website. I can offer expert advice in a more interactive manner and you will come away with enhanced understanding of your machine. They are NOT the same. The outlet check valve is opposite the high pressure cylinder bore. Thank you for your comment!

  • @TargetForge
    @TargetForge Před 26 dny

    Affiliate Links That Support The Work We Do Here! Use our link and visit Airgun Depot! app.rockporch.com/mlink/372?userId=140361 CS2 - app.rockporch.com/prdlink/UBed3CCDvC CS2 L2 (Battery Powered)- app.rockporch.com/prdlink/DLgZx6QxCT CS3 - app.rockporch.com/prdlink/nYp6zRhSOu CS3i- app.rockporch.com/prdlink/JNULlImjtd CS3 L3 (Battery Powered) - app.rockporch.com/prdlink/UVZP8sYOVV CS4 - app.rockporch.com/prdlink/DPZTX4fHQM CS4i - app.rockporch.com/prdlink/JQbFdsXagP The “i” versions have the AC power supply built into the chassis and can run on 12VDC as well.

  • @TargetForge
    @TargetForge Před 26 dny

    Affiliate Links That Support The Work We Do Here! Use our link and visit Airgun Depot! app.rockporch.com/mlink/372?userId=140361 CS2 - app.rockporch.com/prdlink/UBed3CCDvC CS2 L2 (Battery Powered)- app.rockporch.com/prdlink/DLgZx6QxCT CS3 - app.rockporch.com/prdlink/nYp6zRhSOu CS3i- app.rockporch.com/prdlink/JNULlImjtd CS3 L3 (Battery Powered) - app.rockporch.com/prdlink/UVZP8sYOVV CS4 - app.rockporch.com/prdlink/DPZTX4fHQM CS4i - app.rockporch.com/prdlink/JQbFdsXagP The “i” versions have the AC power supply built into the chassis and can run on 12VDC as well.

  • @TargetForge
    @TargetForge Před 26 dny

    Affiliate Links That Support The Work We Do Here! Use our link and visit Airgun Depot! app.rockporch.com/mlink/372?userId=140361 CS2 - app.rockporch.com/prdlink/UBed3CCDvC CS2 L2 (Battery Powered)- app.rockporch.com/prdlink/DLgZx6QxCT CS3 - app.rockporch.com/prdlink/nYp6zRhSOu CS3i- app.rockporch.com/prdlink/JNULlImjtd CS3 L3 (Battery Powered) - app.rockporch.com/prdlink/UVZP8sYOVV CS4 - app.rockporch.com/prdlink/DPZTX4fHQM CS4i - app.rockporch.com/prdlink/JQbFdsXagP The “i” versions have the AC power supply built into the chassis and can run on 12VDC as well.

  • @TargetForge
    @TargetForge Před 26 dny

    2 Sets of Outdoor Shooting Rest Bags Rest Front & Rear Support Sandbag amzn.to/44tnrpX Glass Beads (fill) app.rockporch.com/prdlink/vaGsFaobRQ Plastic Beads app.rockporch.com/prdlink/qdaLeCHU6d Affiliate Links That Support The Work We Do Here! Use our link and visit Airgun Depot! app.rockporch.com/mlink/372?userId=140361 CS2 - app.rockporch.com/prdlink/UBed3CCDvC CS2 L2 (Battery Powered)- app.rockporch.com/prdlink/DLgZx6QxCT CS3 - app.rockporch.com/prdlink/nYp6zRhSOu CS3i- app.rockporch.com/prdlink/JNULlImjtd CS3 L3 (Battery Powered) - app.rockporch.com/prdlink/UVZP8sYOVV CS4 - app.rockporch.com/prdlink/DPZTX4fHQM CS4i - app.rockporch.com/prdlink/JQbFdsXagP The “i” versions have the AC power supply built into the chassis and can run on 12VDC as well.

  • @TargetForge
    @TargetForge Před 26 dny

    Affiliate Links That Support The Work We Do Here! Use our link and visit Airgun Depot! app.rockporch.com/mlink/372?userId=140361 CS2 - app.rockporch.com/prdlink/UBed3CCDvC CS2 L2 (Battery Powered)- app.rockporch.com/prdlink/DLgZx6QxCT CS3 - app.rockporch.com/prdlink/nYp6zRhSOu CS3i- app.rockporch.com/prdlink/JNULlImjtd CS3 L3 (Battery Powered) - app.rockporch.com/prdlink/UVZP8sYOVV CS4 - app.rockporch.com/prdlink/DPZTX4fHQM CS4i - app.rockporch.com/prdlink/JQbFdsXagP The “i” versions have the AC power supply built into the chassis and can run on 12VDC as well.

  • @TargetForge
    @TargetForge Před 26 dny

    Affiliate Links That Support The Work We Do Here! Use our link and visit Airgun Depot! app.rockporch.com/mlink/372?userId=140361 CS2 - app.rockporch.com/prdlink/UBed3CCDvC CS2 L2 (Battery Powered)- app.rockporch.com/prdlink/DLgZx6QxCT CS3 - app.rockporch.com/prdlink/nYp6zRhSOu CS3i- app.rockporch.com/prdlink/JNULlImjtd CS3 L3 (Battery Powered) - app.rockporch.com/prdlink/UVZP8sYOVV CS4 - app.rockporch.com/prdlink/DPZTX4fHQM CS4i - app.rockporch.com/prdlink/JQbFdsXagP The “i” versions have the AC power supply built into the chassis and can run on 12VDC as well.

  • @TargetForge
    @TargetForge Před 26 dny

    Affiliate Links That Support The Work We Do Here! Use our link and visit Airgun Depot! app.rockporch.com/mlink/372?userId=140361 CS2 - app.rockporch.com/prdlink/UBed3CCDvC CS2 L2 (Battery Powered)- app.rockporch.com/prdlink/DLgZx6QxCT CS3 - app.rockporch.com/prdlink/nYp6zRhSOu CS3i- app.rockporch.com/prdlink/JNULlImjtd CS3 L3 (Battery Powered) - app.rockporch.com/prdlink/UVZP8sYOVV CS4 - app.rockporch.com/prdlink/DPZTX4fHQM CS4i - app.rockporch.com/prdlink/JQbFdsXagP The “i” versions have the AC power supply built into the chassis and can run on 12VDC as well.

  • @TargetForge
    @TargetForge Před 26 dny

    Affiliate Links That Support The Work We Do Here! Use our link and visit Airgun Depot! app.rockporch.com/mlink/372?userId=140361 CS2 - app.rockporch.com/prdlink/UBed3CCDvC CS2 L2 (Battery Powered)- app.rockporch.com/prdlink/DLgZx6QxCT CS3 - app.rockporch.com/prdlink/nYp6zRhSOu CS3i- app.rockporch.com/prdlink/JNULlImjtd CS3 L3 (Battery Powered) - app.rockporch.com/prdlink/UVZP8sYOVV CS4 - app.rockporch.com/prdlink/DPZTX4fHQM CS4i - app.rockporch.com/prdlink/JQbFdsXagP The “i” versions have the AC power supply built into the chassis and can run on 12VDC as well.

  • @TargetForge
    @TargetForge Před 26 dny

    Affiliate Links That Support The Work We Do Here! Use our link and visit Airgun Depot! app.rockporch.com/mlink/372?userId=140361 CS2 - app.rockporch.com/prdlink/UBed3CCDvC CS2 L2 (Battery Powered)- app.rockporch.com/prdlink/DLgZx6QxCT CS3 - app.rockporch.com/prdlink/nYp6zRhSOu CS3i- app.rockporch.com/prdlink/JNULlImjtd CS3 L3 (Battery Powered) - app.rockporch.com/prdlink/UVZP8sYOVV CS4 - app.rockporch.com/prdlink/DPZTX4fHQM CS4i - app.rockporch.com/prdlink/JQbFdsXagP The “i” versions have the AC power supply built into the chassis and can run on 12VDC as well.

  • @TargetForge
    @TargetForge Před 26 dny

    Affiliate Links That Support The Work We Do Here! Use our link and visit Airgun Depot! app.rockporch.com/mlink/372?userId=140361 CS2 - app.rockporch.com/prdlink/UBed3CCDvC CS2 L2 (Battery Powered)- app.rockporch.com/prdlink/DLgZx6QxCT CS3 - app.rockporch.com/prdlink/nYp6zRhSOu CS3i- app.rockporch.com/prdlink/JNULlImjtd CS3 L3 (Battery Powered) - app.rockporch.com/prdlink/UVZP8sYOVV CS4 - app.rockporch.com/prdlink/DPZTX4fHQM CS4i - app.rockporch.com/prdlink/JQbFdsXagP The “i” versions have the AC power supply built into the chassis and can run on 12VDC as well.

  • @TargetForge
    @TargetForge Před 26 dny

    Affiliate Links That Support The Work We Do Here! Use our link and visit Airgun Depot! app.rockporch.com/mlink/372?userId=140361 CS2 - amazon.rockporch.com/prdlink/UBed3CCDvC CS2 L2 (Battery Powered)- amazon.rockporch.com/prdlink/DLgZx6QxCT CS3 - amazon.rockporch.com/prdlink/nYp6zRhSOu CS3i- amazon.rockporch.com/prdlink/JNULlImjtd CS3 L3 (Battery Powered) - amazon.rockporch.com/prdlink/UVZP8sYOVV CS4 - amazon.rockporch.com/prdlink/DPZTX4fHQM CS4i - amazon.rockporch.com/prdlink/JQbFdsXagP The “i” versions have the AC power supply built into the chassis and can run on 12VDC as well.