Video

Hi, is the same process for f32 428i ?

It’s gnow this danger,never flip the acsm,airbag module wen u have the ignition on because the computer understand u flip entire the car and blow all airbag 🤦‍♂️🤦‍♂️🤦‍♂️

Do I need to install the camera as well in order for the hud to work?

Ich habe deine Anleitung befolgt allerdings geht die Lenkradheizung nicht mehr. Idee?

Did you park your car for several months during the retrofit of all these items?

How did you know where to drill the holes in the rear bumper for the sensors?

I found your channel today and let me tell you i love the retrofit videos on your f32 i also have one bmw f32 and also did a few retrofits in my car, i would love to share with you my mods that you might take some inspiration.

Welcome Back Brother!

I think the acc asb pump also different

welcome back!

Welcome back

I haven't clicked on a video so fast lol. I just completed the same retrofit and got everything working successfully. I'll also be making a DIY video. Just out of curiosity, do you happen to know what the resolution of the cameras are?

Nica to see you again!

I did this on my 2016 435i and i had to change the abs sensors to, so heads up on that if you don't get it to work after retrofiting and coding everything

we are waiting for you!!

Cool🎉

Hello, love your work. Is this possible on a g series , i have a x3 g01 that i want to retofit drive assist but have trouble with getting the wiring

At 9:05, is the harness you are showing in the video the same one that is in the door jamb? Is this removed by removing the rubber boot with all of the door wires that is in the door jamb?

I just did the wiring yesterday and getting the wires through the large black grommets behind the brake booster and fuse box on the driver and passenger side was bad 😂. Admittedly, the first wire I ran on the driver's side I was figuring out how to do it, but I had a very long (15 inch flathead screwdriver) that I used to push the cable through the hole in the grommet and then fish it from inside. On the passenger side, the job took 5 mins since I learned from the drivers side

hi there, i have a question about I want to add the vibration motor into my F30 steering wheel. Can you make a tutorial about how to retrofit it into the steering wheel please? Not too sure how to connect the motor with the wiring harness

Do the footwell lights also change from pre-LCI to LCI? Or is it just the lights in the door panels as well as the radio/HVAC panel?

I have a 2014 435i with a June 2014 build date. Do you happen to know if my car has the IKHA or IKHA3 module?

I NEED THIS

did you ever figure out what is the pin16for? looks to me as if it is another ground, but I can't find any wiring diagrams on the net...

Congrats great video! My problem the factory installed charger in my F31 makes my iphone overheated in the armrest, and hardly charges rather maintaining the battery on same level while carplay is on. Is it something can be fixed?

Great series on how to completely retrofit the NBT EVO with the ATM. One question though, why did you need to add a second microphone on the passenger side? Is this something that LCI cars/cars with NBT EVO have that pre-LCI cars do not have?

Regarding the brown plastic part at 2:03 and the rubber grommet, are those necessary for this retrofit? If so, what mirror did you get it from? Did it also contain surround view?

And how is the leather today? One year later. Is it like the original, there it looks after 2000km, like as after 200000km? Or is it better? Hope you know what I mean.

I know this video is old but does it retain the surround sound modes? Concert hall? Theater ?

hey man, i'm trying to retrofit IHKA3 on a pre-lci f30, did all the wiring as you did, plugged in the new IHKA3 module, but the windshield demister button is constantly blinking... so i checked with esys, and when i press read VCM it says IHKA but when i press read ECU, ihka disappears. when i read vcm and left click IHKA and do anything with it, it says timed out... (cant connect to ECU basically). any solution for that? also the 6:13 part is VERY unclear :( i have no idea where to find these infos or how to look through pszd files...

Hi. Hope someone can help. Just installed the LCI panel. My car is 03.2024 bmw F80 m3. Everything works plug and play, all controls buttons and etc. But the colour does not change from white to amber, even after coding. Bimmercode shows IHCA (2) something like this not IHKA3. I am a bit stuck. How to make colour change to work?

Anymore pin codes? I cant acces oem controls

Help why my original car option wont work

Hello brother, thank you so much for your effort for doing these amazing videos for us. I have a 2015 BMW F33 428i XDRIVE , i bought the car accidented , i bought aftermarket parking sensors and i plugged them but it is still showing on my car screen that parking unaided and parking assistance unavailable , after watching your videos i concluded that the siren that comes on the rear right back side is missing and its connector is hanging on the rear right side under the black bracket, do you think it is the problem that is causing the sensors malfunction, knowing that also the front sensors are not working too. Another question ,may the new aftermarket parking sensors require coding to work? please help me! thank you in advance and sorry for taking your time and bothering you!

Hi, nicely done. Thank you for for that. My question is: I have a 2015 x5, f15; do you know where is the atm module located? Please let me know.

I'm hoping to achieve what you tried first. I can't find a replacement SZL with the right combination of stalks (need the high beam assist AND rear wiper on opposite stalk).

We removed every part of the car, we couldn't find the module, where is it? 2016 bmw 116 d f20

I have the same problem on my 88 325ic as well, but only the driverside window clips the rear window trim. Would following the same adjustment levels you have on the 89 work for my vert?

Your videos are so compreensive that one can find only few like this. THanks for the share. I've also found one from ebay but I'll probably swap the whole SZL itself. So strange that I found it for 110$. Man, but just a cable for a top view camera, or a side view camera can cost 200+. I don't understand what's behind that pricing policy.

Hey, that's great. Just what I was looking for. You're making the wires on your own. I'm thinking of retrofitting full surround view to my F10 but the cost of all the wiring harness stops me. I've thought maybe I could make them on my own but I don't know anything about the type of the wires and the connectors. Maybe you could help me build the harness? If you know, just share the wire types and the connector types and where I can get those connectors if they're sold separately.

Yeah, indeed a great job. This is the best and the only video that describes the installation of the top view camera and the blind spot feature in detail. I've been trying to retrofit surround view to my F10. But the parts needed are so expensive. I've been trying to collect different parts from different sellers on ebay. I've found the module for 45$, the a pair of mirror lower hosing for camera for 16$, the operation unit with the camera button for 40$(not exactly for the 5 series though, it's for 7 series and the outer frame is gloss in contrary to the f10 one which is matte), top view cameras each for around 70$. But the side view cameras are more expensive the the top ones, around 110$ each. What frustrates me is the price for the wiring. Man, they are expensive. Like aroud 300$. So this all makes me think twice before I procceed. Btw, the lower mirror housing I found is not the shadow line glossy version, it's matte, which is different from what I have.

Great video i just wish you list all parts required and part number in your description would be nice thank you

when you disassemble the whole dash like that when you put it back in won't some parts start to creek or something like that?

Excelent video. ATM, without can2 filters (emulator)??

I have a thick brown black wire and a thin brown black wire, what do i with these?

Hmm, I don't know what I am doing differently but when I code DKOMBI the current gear indicator (P/N/D) doesn't show. I've tried timecriteria 0317 and 0717 but no difference.

I bought a 6wb cluster non hud it dont have heads up display is there a cable i can buy to retrofit the heads up display with the same non hud cluster and input would be appreciated

Great video! I have an f36 2015, if i retrofit hud from a junkyard what coding do i need to do to get it functioning? Or is it the same coding as you did in this video?

Hi, did you replace your remote? I see you didn’t have pins 34 and 35

I've moved from Champ2 to NBT and added the TCB for telematic services. So I've coded all needed SALAPA elements and removed the old one. But TCB still didn't appear in ECU list but CBX remains. I know I could remove CBX Media and Ecall in SVT-Editor but still didn't have any luck with the TCB. Any proposals?