Video

When the rack shaft goes all the way back into the steering box, it does not pass the internal channel where the bushing spurs enter and you cannot remove the bushing, therefore it must be removed to be able to remove the old bushing and install the new one.

@@steeringrack9561 Thank you for your answer, I removed the box a few days ago, easier to understand when the box is in the hands I disassemblied the little channel, i bought your part using eBay on july the 10th, hope you will be abble to send it as soon as possible 🙏 Thank you very much from France And Hope my english is good enough 😉

I did not change the bushing from the steering box on this model, but if you can remove it completely with the steering box on the car, it means that you can install it.

@@steeringrack9561 The rack cant be moved enough to get the bushing out, you have to totally disassembly the hole rack housing to replace the hushing on Nissan leaf gen 1.

In this case, the steering box must be taken down and disassembled takes about 3 hours of work.

Yes, is suitable.

Hi, I changed the bushing in a modus, it's a Megane 2 bushing, I think it fits your bushing too, if the Megane 2 can be changed on the car without removing the steering box, it should also work for you. If you manage to remove the entire bushing without breaking it directly on the car, you can mount it yourself.

Hello, any type of grease works except graphite grease.

Hello, sorry for late response, I reinstalled my windows and the links had broken. I will try to make new ones and update the description.

Hello! Can you update the folder with crack? The crack function for version renault can clip v215 and v218? @@handson871

Hello. I do not recommend making the bushing with a 3D printer, because of the shocks the printed layers will come off, it is best to make it from polyamide.

@@steeringrack9561 Hi, thanks for your reply, much appreciated. I found out that Bedford never actually supplied the bushings as a spare part, and so was seriously considering the 3D printing option, but miraculously I found a complete reconditioned steering rack on EBay. Because I’m giving the vehicle a really good health check for its final mot I thought it best to treat it to the ‘new’ rack. Just out of curiosity, how would I have made the bushing from polyamide? Would it be the case of forming a mould?

I make bushings from polyamide bar for any car model on the lathe, but a steering box is needed to be able to take all the necessary dimensions and the most important thing is to check the bushing on the box at the end. I have put up for sale on Ebay several models of bushings. Now I'm looking for a Daihatsu Terios box to make the bushing and I can't find this car model in Romania, I think I'll buy a box on Ebay to make it for this car model as well.@@FUNKINETIK

A bushing made in a mold will not have the same hardness as polyamide. At the moment I make bushings for about 90 car models, after making each bushing is mounted on the steering box and checked.

@@steeringrack9561 I’m just intrigued in how they are made (don’t worry I don’t intend going into the bushing replacement industry : ) Do you obtain ready formed tubing and then transform into specific bushing - please tell me. Be good to know for future reference if you can supply replacements.

Steering bush kit changed by service centre.

If the bushing is tighter, it is normal for the steering wheel to return to its normal position, but it will return after a few thousand km.@@artatulsharma8813

It means that your bushing is too tight, that's why the steering wheel doesn't come back completely, it's not normal, but in a few thousand km it will grind and it will go normally.@@artatulsharma8813

Hello. For the Honda Civic, I only have bushings for the 9th generation (2011-2017).

The bushing is only on the passenger side.

The bush is only on the passenger side.

www.edotec.ro/

This bushing is suitable for the following car models. Megane 2 / Kangoo / Scenic 2 / Clio 3 / Mazda 2 / Nissan Micra 3 K12 / Tiida / Ford Fiesta Mk6-Mk7

If you manage to remove the entire bushing without breaking it, it can be mounted without removing the box from the car.@@claudiagugu3413

Cabin, is linked to steering column

Brand: Britune Link: www.aliexpress.com/item/4001084251245.html?spm=a2g0o.store_pc_groupList.8148356.11.203f5d22SZgFg6&spm=a2g0o.store_pc_promotion.hotSpots_6001933545671.1

yes, at some cars

@@handson871do you think it can be done on a Suzuki Swift iv 1.2? (The steering rack looks much like the one you're dealing with here)

The bushing is very easy to mount without removing the box from the car.

@@_-BK-_ On the Suzuki Swift, you have to remove the box from the car to change the bushing, I also have bushings for the Swift.

Bucsa se schimba fara a da jos caseta, este caseta mecanica deci nu are ulei in interior.

Megane 2 are caseta mecanica nu are ulei doar vaselina.

The original bushing has no rings and this bushing is mounted without rings.

It depends on the model of the bush, some are used with o-rings, others without. Megane 2 comes without rings, Toyota Rav 4 comes with rings for example.

It is full throttle , 3 person inside including me and I have the 5th gear changed with one from logan 0.9 tce gearbox to reduce the RPM of the engine , but it reduced the power also.

Da, merge dar iti trebuie alt tip de adaptor pt radio aftermarket. Aici este un link cu diferentele intre cele 2 tipuri de radio Update/Tuner . Daca vrei sa pastrezi plug and play cumpara direct adaptorul pentru Update List , altfel trebuie sa schimbi pinii in mufa ca sa folosesti acelasi adaptor ca al meu . theclioteam.blogspot.com/2011/03/modificare-sistem-audio-din-tuner-list.html

Aici este site-ul de unde am cumparat adaptoarele www.edotec.ro/conectica-auto-adaptor-comenzi-volan-comenzi-volan-renault

Si aici e pt Update list al tau www.edotec.ro/connects2-ctsrn005-2-adaptor-comenzi-volan-renault-clio-twingo-laguna-scenic-megane-modus-vdo-update-list.html

Yes, in my opinion.

da

lol

It is just a tutorial displaying how to replace the original radio with an aftermarket one.

CTMULTILEAD.2 , nu stiu trb sa cauti pe site la ei bagi acolo masina si iti da ce adaptor trb sa folosesti

CTMULTILEAD.2