Video

Love the tool set but honestly I would have just used a hole saw to enlarge the hole lol.

Are made in japan Vessel Philips bits good for US Philips Screws?

7:29 Mount that holder sideways on your wall and then you can alternate directions and use probably all or at least almost all of the slots.

Williams 1/4 thumb spinner on Amazon.... that should work great for your Tone ratchet.... its thinner than the Koken,,,,,look it up.....

Curious whether the shaft in the big handle is true and straight. You should have put it on the lathe and take a look. This thing is $40 after tax. So it’s better to be impeccable

Im running a 2500 psi 1.75 gpm electric pressure washer and just getting swivel marks? I hooked the hose directly to the powerhouse cause i couldn't figure how u connect the gun directly? Could that be the issue?

Which one is better, the Hazet or the Inbus magazine type screwdriver?

I don't see any INBUS "rachet" screwdriver review. Have you done one?

I think some bits are made so you screw in an angle. For example that Bosch seems to be the case. The question is, if you screw in an angle if it will slip.

Man, you are the screwdriver guy. Like girls like shoes you like screwdrivers.

Just trying to work out which of these Makita would suit me? I work on office tech like copiers & printers

I read the title as “an electrical knife” 😂

What are the best ones for the Wera wrench?

HEY.... all those brands... but NO VIM?! ... smells like advertising to me, look at VIM

Great videos, love all the in-depth testing. Would be good to test the Wiha double sided bits in these smaller EDC style bit holders. The Leatherman bits and tiny Steinwhale double sided bits would also be awesome to test.

Facom makes the flattest i know.

Perfeito essa tone, muito funcional e prático!

That's a Gearwrench Gimbal ratchet - gimbals only make sense when they're loose. Wishing you success on your hunt, I'd like to get something similar too.

Craftsman made something back in the day, a black wafer with a 1/4, or 3/8 square cut in the middle. Essentially a coin with the square cut in it. You'd place it in between the socket and the anvil on the ratchet, and it stuck out just the right amount. I actually have a separate plastic one that came with a cheap no-name brand set of sockets with ratchets that a friend gave me. The Craftsman one came in a yellow plastic soft sleeve with a clear flap. I wanted to buy them as they were listed on eBay a couple months ago for $45+ and didn't pull the trigger. Now I can't find the multiple listings anywhere. Anywho, that isn't quite what you are looking for anyway. We should get someone to make a coin with a protruding 1/4 and 3/8 nub out of the middle!

If you want to buy this from Prestacycle, do it in a way where you‘re guaranteed hassle free returns. They royally screwed me over when I bought the tool from them. One of the items I ordered wasn’t included in the box and the tool itself was off by more than 10%. Never heard back from them.

Do you have a email where I can send you a recommendation? . Probably it is what you are looking for. I wrote the model here in the comments section, But for some reason, the comment is erased automatically😮. It is a german brand.

7:45 apoke with Vessel about this and they said we have never had anyone complain about this which is bonkers to me. I guess rhey juwt never use em so no one complains.

Some other options for you to try, although I couldn't find all of them in 1/4 drive: - Asahi VQ0300 - coin style but it goes on the socket side instead - SEK ORH205 - STRAIGHT 10-1875 - Pro-Auto RH-205T2 - KTC BRG3 - STRAIGHT 10-6500

I've seen a Nepros version of the Koken and Tone spinners with a rubber grip that you might want to consider. It might still be too thick, but it's worth a look.

Two other Japanese 1/4" spinners (not ratchet) that you might want to try: - KTC NEPROS NBE28: very nice rubber grip ring (that is also replaceable, part n. NTYR1201). - KTC BE2-Q: body made of red plastic, works OK.

This seems like something that can easily be printed

I have one of those cheap harbor freight sets that came with a blue plastic wheel and you can insert between the ratchet head and socket. I bet you could try that on the tone ratchet by inserting a 1/4 to 1/4 hex bit in the top ans inserting the blue wheel.

I have the Koken Spinners and I love them

I have a couple of SK USA Ratchet spinners (1/4 & 3/8). One has barely enough knurling, the other is nearly smooth. Why can’t someone make a ratcheting HAND spinner that is low profile and with good knurling? Some of us don’t need these things to withstand a lot of torque. We need something we can grip, get into a tight spot, and have low back drag. And we aren’t using them with ratchets necessarily.

I LIKE THE WAY YOUR THINKING ,,,,,, TO GET THE SMALLEST CLEARANCE . CAN'T WAIT TO SEE WHAT YOU COME UP WITH THANKS FOR YOUR TIME !!!!!!

How about a video on low profile hex to 1/4 drive adapters?

KTC BAE23 it's an adapter but it's pretty flush. I use it with my ratcheting wrenches and astro sockets to hold the socket in place.

I know what U want and HAVE seen them for sale, its more like a flat thin coin with a grippy edge. I think Sealy tools makes one but ill look around and edit my post.

I like the Diablo 6" for American stuff.

Great review thanks, I bought one of these and put a Chinwaukee Battery in it from EBay and it did at least do ONE cut :) My regular batteries seem OK but yea I feel they might not do to well if I tried to use this for everything. Good saw regardless, I really like it, but like any tool a bit of common sense use, goes a long way.

Icon is coming out with this set and including sockets at some point this years

Bought a bosch 12v impact driver from japan, love it 😀😊

Hey question. Am i right in saying if you want to have servos, you have to connect either the main battery or an additional one to the servo rail? If this is correct, what is the max voltage input into the servo rail? (In other words, whats the biggest sized battery i can plug into servo rail) For instance, Is it 5v like the pixhawk, or can the servo rails take in 12v?

It would be nice if he didn't speak like a drunk. 1.25% speed for the win.

Who makes those 300 mm long bits?

Wera made in czech Republik. Greetings from bavaria

Dont forget Elora, Matador, Stahlwille, Alarm (pliers), Heyco,picard, bessey great German Tools too. Greetings from Bavaria. Why looks American tools like from a Gumballmachine?

You're way to worried about that wobble, just use it and appreciate it genius

Hello, are you interested in disassembling lithium batteries?

Thank very much for the information

That was impressive, I too didn’t think it would work that well 👍🏻

My yellow prime light takes forever or intermittent. Not sure what the overdue button is overriding.

I would think that the wrench does not go back to zero to force you to reset it before next use and its just part of the way it is designed to work. To me, it makes sense and is okay. I have spring loaded torque wrenches that do permit multiple uses without a reset in-between. Looks like an interesting tool and not a bad price, especially with the case and bits included (currently ~$43 on Amazon).

Very interesting. Thank you so much for the demo! Really interesting device. I was wondering from the previous video how this actually worked. Surprised it actually seems to be decently accurate if not also precise.

Search for Pittsburgh 94011 - it is a thumbwheel ratchet (with the knurling) but has a lock. Also the Titan 12090 might do the job (but isn't knurled).