![STEP Tools, Inc.](/img/default-banner.jpg)
- 24
- 112 155
STEP Tools, Inc.
Registrace 17. 10. 2008
CNC Machining and global e-Manufacturing using the STEP and STEP-NC ISO engineering data standards (ISO 10303).
Demonstration of Three ISO 23247 Digital Twin Use Cases
A demonstration of three ISO 23247 Digital Twin use cases - dynamic robot scheduling, airframe weight reduction, and tool life management, on Oct 27, 2020. ISO 23247 is the Digital Twin framework for Manufacturing.
The use cases are:
“Flexible Scheduling for robot drill and fill” (Boeing)
“Weight reduction using Digital Twins” (Lockheed-Martin)
“Machining Process Optimization” (Sandvik Cormorant/ KTH University)
Technologies to be demonstrated include STEP, MTConnect, and QIF.
The demonstrations are the work of the International Standards Organization Workgroup TC184/SC4/WG15
The use cases are:
“Flexible Scheduling for robot drill and fill” (Boeing)
“Weight reduction using Digital Twins” (Lockheed-Martin)
“Machining Process Optimization” (Sandvik Cormorant/ KTH University)
Technologies to be demonstrated include STEP, MTConnect, and QIF.
The demonstrations are the work of the International Standards Organization Workgroup TC184/SC4/WG15
zhlédnutí: 8 236
Video
Robot Physical Twin
zhlédnutí 121Před 4 lety
Four physical robots (called Stan, Kyle, Kenny and Cartman) used to test dynamic scheduling and digital twinning for drilling. In the tests, Kenny is prevented from completing his tasks so the others must take over if they can.
Robot Digital Twin - Drilling with Reach Issues
zhlédnutí 149Před 4 lety
Digital Twin model built for airframe drilling with four concurrent robots. In this example, some holes are not drilled because the robot can not reach the start or end point. Note the different tool holding.
Robot Digital Twin - All Drilling Successful
zhlédnutí 274Před 4 lety
Digital Twin model built for airframe drilling with four concurrent robots. In this example, all holes were drilled successfully
Enabling Closed-Loop Machining
zhlédnutí 2,4KPřed 4 lety
Demonstration of a digital thread model in STEP-NC Explorer, showing geometry, tolerances, process, and simulation with calculated tool cross section information
Build it Here, Now, and Right with Digital Thread
zhlédnutí 3,8KPřed 6 lety
On July 12, 2017, a team led by STEP Tools stretched the digital thread farther than ever before - from design, through manufacture, and into five axis measurement.
DMDII Digital Twin Sneak Peek
zhlédnutí 550Před 7 lety
Testing digital twin on a Siemens 840D SL and Hyundai Wia mill at the DMDII on June 16, 2017. This is in preparation for a machining and measurement digital twin demonstration scheduled for July 12, 2017.
Digital Thread and Digital Twin Demonstration
zhlédnutí 18KPřed 7 lety
Digital Thread and Digital Twin Demonstration, October 5, 2016. A standards-based digital thread for integrated machining and measurement.
AP242 Machine Tool Kinematics in NX and STEP-NC
zhlédnutí 6KPřed 12 lety
Adding kinematics to a machine tool model and passing it as STEP AP242 between NX and STEP-NC Machine. STEP-NC Machining Accuracy Demo and Industry Day, KTH Stockholm, June 14, 2012. For more information, refer to the demo home page at www.steptools.com/library/stepnc/2012_stockholm/
AP242 Machine Tool Kinematics in Catia, NX, and STEP-NC
zhlédnutí 1,9KPřed 12 lety
Adding kinematics to a machine tool model and passing it as STEP AP242 between Catia, NX and STEP-NC Machine. STEP-NC Machining Accuracy Demo and Industry Day, KTH Stockholm, June 14, 2012. For more information, refer to the demo home page at www.steptools.com/library/stepnc/2012_stockholm/
Cutting tool STEP AP242 in STEP-NC Machine
zhlédnutí 2,8KPřed 12 lety
A rich STEP AP242 cutting tool model with geometry, semantic PMI, and ISO13399 cutting tool parameters is examined using the STEP-NC Machine software. STEP-NC Machining Accuracy Demo and Industry Day, KTH Stockholm, June 14, 2012. For more information, refer to the demo home page at www.steptools.com/library/stepnc/2012_stockholm/
Cutting tool STEP AP242 in IDA STEP
zhlédnutí 2,2KPřed 12 lety
A rich STEP AP242 cutting tool model with geometry, semantic PMI, and ISO13399 cutting tool parameters is examined using the IDA STEP viewer. STEP-NC Machining Accuracy Demo and Industry Day, KTH Stockholm, June 14, 2012. For more information, refer to the demo home page at www.steptools.com/library/stepnc/2012_stockholm/
Cutting tool parameter import from STEP AP242
zhlédnutí 16KPřed 12 lety
Cutting tool parameters are read into Siemens NX CAM from a STEP AP242 description using an NX plugin developed by KTH. STEP-NC Machining Accuracy Demo and Industry Day, KTH Stockholm, June 14, 2012. For more information, refer to the demo home page at www.steptools.com/library/stepnc/2012_stockholm/
Cutting tool parameter export as STEP AP242
zhlédnutí 1,5KPřed 12 lety
Cutting tool parameters are exported from Siemens NX CAM to a STEP AP242 description using an NX plugin developed by KTH. STEP-NC Machining Accuracy Demo and Industry Day, KTH Stockholm, June 14, 2012. For more information, refer to the demo home page at www.steptools.com/library/stepnc/2012_stockholm/
Cutting tool classification STEP AP242 and ISO 13399
zhlédnutí 3KPřed 12 lety
A STEP AP242 description of a cutting tool model is annotated with ISO 13399 cutting tool classification and parameter data. STEP-NC Machining Accuracy Demo and Industry Day, KTH Stockholm, June 14, 2012. For more information, refer to the demo home page at www.steptools.com/library/stepnc/2012_stockholm/
Cutting tool export as STEP 242 from NX
zhlédnutí 7KPřed 12 lety
Cutting tool export as STEP 242 from NX
STEP-NC Machining, Oct 2008 (more milling footage)
zhlédnutí 1,7KPřed 15 lety
STEP-NC Machining, Oct 2008 (more milling footage)
Export the Power Apps, Copilot, Chat GPT, Revit, Plant 3D, Civil 3D, Inventor, ENGI file of the Building or Refinery to Excel, prepare Budget 1 and export it to COBRA. Prepare Budget 2 and export it to Microsoft Project. Solve the problems of Overallocated Resources, Planning Problems, prepare the Budget 3 with which the construction of the Building or the Refinery is going to be quoted.
很详细
Sir all tool design cro and file make
Which is the software used for digital twin operation?
Fantastic possibilities there! what standard defines cutting tool usage data like material, doc, woc, feed and speed? thanks in advance and for sharing And merry Christmas
Great demonstration. Well done everyone!
Very nice!
Great work!!
Is STEP capable of transmitting kinematic information?
Can You please provide detailed tutorials on creating a digital thread for a digital twin of a machine tool.
corenews.in/digital-twin-the-rising-hope-of-the-tomorrow
awesome ..
How do we get this plugin from KTH?
is it done using APIs??
I really don't see the point of this - it seems more like a gimmick, than anything else. I get what you are saying - make the model more generic, and make the machine controller/embedded computer do the work of interpolating how to machine the part. You aren't reducing the amount of design work required, just offloading from the par t designer to the machine designer. Yeah, you'll say "but machine only has to be designed once", yeah, but it would have to be PERFECT or it will fail.
streamlines the cam side of the manufacturing. eliminates g code, eliminates post processors, simplifies in process gaging, dumping g code to go from straight model based machining will be an evolutionary step in cnc.
waw great