Video

Little newer controller with plc on my perc rite system same hydraulic unit. Home 4 yrs old do you know procedure to test the hydraulic unit? Great video thanks haven't had solenoid issue yet but sure it will come!

Just opened mine - model HX5700. They definitely don't believe you have the right to repair. Casing is glued together with something fierce and once inside, there's absolutely no way to get the batteries out - they poured epoxy inside it to set everything in place. The only thing replaceable is the little piece of green silicone that covers the clickety power button bubble.

HOLY SHYTE!!!! Grab a pair of plyers my guy!!🤣🤣

I use the faceplate. Push the knob in and turn to the proper cycle.

The fact he said video tape this got this video a like🤭

I have a question my mom has the same washer. Here is the thing the knob is stuck in the off position. It will not pop out so that I can remove the knob I cannot see the clip at all. The knob and the timer dial spins it will not engage and click I can also move the knob and timer dial up and down. Do you know if I need to just replace the knob or would I have to replace both parts?

You didn’t show how you were able to put that metal thing back and how you make a hole to put that screw on. You were trying to teach us how to repair that visor but you didn’t show how.

there's an easier way to get the machine to start even when the selector knob is broken. Reach around the knob and grip two sides of the timer dial with your thumb and fingers. Rotate it by pressing in hard and turning. I've had to do this for years until I finally realized I needed a new knob and it was as easy as this video to replace!

Good idea. I used nut and bolt with lock washers

My visor broke today. First thing I did was search CZcams. Found your video. My broken part looks just like yours. Thank for the DIY

My turn.

Holy literal shits. I honestly doubted I would find what I was looking for after watching the first few videos which were not repairing the visor but installing or reinstalling one. I laughed out loud when you panned to the lone metal rod with the clip on it, as that is exactly what I have in my car now. I wonder if this is/was common for Camrys as mine is a 2009, same exact issue. Now I’m glad I kept the visor itself, and am definitely going to give this a shot. Thanks for the video!

Are you a good person? Let’s check and see! Have you ever stolen? (Even if it’s something really small or not worth much) Have you ever lied? Or have you ever looked with lust ? Now, have you ever taken the Lords Name in vain? Have you ever hated someone?If you’ve ever done any of those things, you would be either a liar, a thief, an adulterer,(for looking with lust. See Matthew 5:28), a blasphemer(for taking Gods Name in vain), a murderer (for hating someone. See 1 John 3:15) or maybe even all of them. And that was only 5 of the Ten Commandments. Therefore Gods Standard Is Very High. The Bible Even Says That If We’ve Just Broken One Law We’re Guilty Of Breaking Them All. (James 2:10) So we have all sinned against God and therefore deserve death.(Romans 3:23 & 6:23)That’s why A Savior Was SSent; Jesus Christ, to die for the sins of The World And Then He Rose On The 3rd Day . Through His sacrifice He Paid The Fine for our sins, and made Atonement for the sins Of The World. Now we can be made new by accepting The Gift of Salvation. In order to accept This Gift, we must first Repent. This is a change of mind about sin (from an embrace of sin to rejection of sin) and a Turning to God. Once you Repent, you can then turn to FAITH/TRUST in the Savior. A person who has truly Repented of their sin and has Trust in Christ will give evidence of a changed life. Therefore, as a Result of Salvation you’ll then produce Good Works and the Fruit of Salvation. (Reading the Word, Acts of Kindness, readiness to help, to serve, to give of oneself, The Fruits of the Spirit, etc.) You aren’t Saved by doing Good Works, but you can then produce Good Works once you are Saved.-

I am having the same issue where the knob spins. When I took the old knob out, teeth seemed to be fine. I still ordered a new knob from Amazon, but replacing didn't solve the problem. Could there be another issue causing it to spin?

I've recently discovered baking soda and super glue as an excellent adhesive/plastic filler. I have a floppy visor. I'm going to use the info in this video, but instead of the screw, I'll dust with some baking soda and drip on some Super glue. Yes, I'll clamp the 2 halves together first.

Lmao a douche bag like me. Haha quality !!!

My visor is limp now... plastic is not broken yet, I guess I'll come back when it happens 😬

Perfect! I found two broken pieces of plastic! JB weld on one and waiting for the new plastic knob to be delivered! Thanks for being a douche like myself!

Thanks for the video.

THANK YOU for the video repair ⬆️🙋

Thank you for this video!!

Thanks for the video. I used this video to get it down. czcams.com/video/sFhgdUw4be8/video.html yours to fix it, but I used a seem ripper to cut the stitches then was able to sew it back up so the repair was nearly invisible (i just used whip stitches to put back together incase it fail and I can see those stitches a little.) Thanks again for the video. It was very helpful.

Your video was the best by far of the several I viewed. THANK YOU (your "special young lady" likes your vids because you're good at this). I bought a replacement for my visor but noticed when I removed the old one that it seemed remarkably fixable so YIPPIE! Going to follow your lead. The replacement I purchased looks exactly the same with the exception of the base of the plastic piece that includes the metal tabs. I could NOT get the new visor to click in but the old one fit once again and held beautifully. I read on one of the other "replacement vids" that if you have a Camry build in Japan and get the USA visor the mechanism will NOT Fit. There is a very slight physical difference. My VIN begins with a 4 so it was assembled in the Good Ol' USA. FYI Here are the other VIN codes for Toyota. Toyota VINs starting with "1", "4", or "5" represent vehicles assembled in the United States, VINs beginning with "2" indicate vehicles assembled in Canada, and vehicles with VINs beginning with "3" were assembled in Mexico. Vehicles with VINs that start with "J" were produced in Japan.

Thanks fr the info.

I have the same washer and was able to fix the knob with your video. Thank you!!

Thank you so much man you saved me a lot of trouble ✅😇

Thanks! Worked like a charm

👍🏻👍🏻👍🏻👍🏻👍🏻♥️

Works and helped!! TY

Just crack it open using the holes at the top. Its glued together. Put the switch in and glue it back together with epoxy or put a cpoule one in rubber bands around it. Of white medical tape. Replace the batteries while your at it. Plenty of tutorials on this. Then youll be good for another 5 years.

Ahh a fellow douche bag

Cheaply made GE knob.

Did the new know work? I noticed the other teeth on the part that stays on the washer are also a little worn, but not broken off like the actual knob.

Just replaced the knob so far so good. Thanks a bunch 🤞5 bucks from Amazon.

The plastic piece on the timer thats latches on the knob looks cracked. Can that be replaced or am I gonna have to replace the whole timer

unreal. some douche charged us about $100 8 years ago for this same thing. It has happend again, so i think i will go the route of ordering the part myself this time

I just fixed mine. The plate with the arrow on it didnt need to be replaced, just the knob. Also, for me, the new knob had a slightly different clip on it and it wouldnt hold the knob on the stem when pulling it out to start the washer. So I just took the clip from the old knob and put it on the new one and now it works!

Ass grapes lol love the name

Very helpful! Thank you for sharing~

life saver

Thanks I searched youtube and you had the exact machine as mine same worn part. 5 bucks and a couple of days the new knob arrived. Hardest part was dealing with the tiny plastic clip but I got it done thanks for making the video.

Great video, simple, but very useful. Thank you.

Great video (but)....and i am saying this in a humorous🤣🤣 way because its funny you being a man and not knowing your tools...it is called a "wrench" not a crescent wrench. A crescent wrench is an adjustable wrench, so it has no 1/2, 9/16 or like 3/4 marking because it is adjustable to fit all sizes!! A regular wrench will have these marking like 1/2, 9/16 on the wrench, which is specific to that one size and is not adjustable like a crescent wrench would be!! Great video though you did help me out and i appreciate it!!👀👍

I’m so dead at the fact we are taking advice from a guy who’s name on here is assgrapes 😂😂😂. Anyways thanks for the advice!

Youre the man!! I fixing mine and my mother in laws

How do you know if the arrow is facing the right direction

Thank you so much!!! I searched for a long time and yours is the only video help available for this problem. Just saved my parents a lot of $$$ :)

Thank you for the detailed video. I wish you would have taken extra time to show how the large pin and the flap fits into the visor so it moves correctly.

Desde Costa Rica muchas gracias me salvo. Pura vida.