- 513
- 20 602 125
Needle Media
United States
Registrace 22. 11. 2012
Hey Guys! It's Ryan Needle here, this is my main channel. Here you will see and have a deeper look into my life. I own a Video Production Company here in CNY called Needle Media, and specialize in story telling. Over at Needle Media we do it all from Weddings, all the way to branding. There is no project too big or too small! Subscribe to stay updated with my life and learn some things about jumping into the videography field or even the photography field! With loads of experience I make it a mission to share my knowledge to the world!
How to Film a Wedding - Behind the Scenes of a MOCK Wedding Shoot (Canon C70)
What's up y'all! Welcome back to the channel.
In This Video: I took you guys behind the scenes on a commercial shoot for the Hampton inn and suites for their wedding website. This was an interesting shoot as there was no "real" wedding but we had to improvise and fake a real wedding in just a couple of hours. Check out the workflow and how we adapted to this shoot! It was also nice to finally use the canon 24-105 f2.8 they just released and my god! Cannot wait to release a review about it here soon. Anyways you all know what to do! Like, Subscribe, and see you next time!
GEAR USED IN THIS VIDEO:
Canon C70: www.bhphotovideo.com/c/product/1595392-REG/canon_eos_c70_cinema_camera.html
Canon RF 24-105 2.8: www.bhphotovideo.com/c/product/1793385-REG/canon_rf_24_105mm_f_2_8_l.html
Easyrig Minimax: www.bhphotovideo.com/c/product/1490500-REG/easyrig_erig_minimax_q_minimax_with_carry_bag.html
Canon R6: www.bhphotovideo.com/c/product/1547010-REG/canon_eos_r6_mirrorless_digital.html
Sigma 35mm 1.4 EF : www.bhphotovideo.com/c/product/898831-REG/Sigma_340_101_35mm_f_1_4_DG_HSM.html
Tascam DR-10L: www.bhphotovideo.com/c/product/1281085-REG/tascam_dr_10l_mini_portable_recorder.html
Light: www.bhphotovideo.com/c/product/1559567-REG/godox_led_rgb_light_stick.html
PHOTOGRAPHY GEAR USED:
Canon R5: www.bhphotovideo.com/c/product/1547009-REG/canon_eos_r5_mirrorless_digital.html
Canon RF 24-70: www.bhphotovideo.com/c/product/1502500-REG/canon_3680c002_rf_24_70mm_f_2_8l_is.html
For Wedding Inquires: www.ryanneedlemedia.com/
For Business Inquires: www.needlemediastudios.com/
Follow me!
needlemedia
needlemediastudios
NeedleMedia/
Subscribe → youtube.com/@NeedleMedia?si=t8DA80ExdRpMPwP9
In This Video: I took you guys behind the scenes on a commercial shoot for the Hampton inn and suites for their wedding website. This was an interesting shoot as there was no "real" wedding but we had to improvise and fake a real wedding in just a couple of hours. Check out the workflow and how we adapted to this shoot! It was also nice to finally use the canon 24-105 f2.8 they just released and my god! Cannot wait to release a review about it here soon. Anyways you all know what to do! Like, Subscribe, and see you next time!
GEAR USED IN THIS VIDEO:
Canon C70: www.bhphotovideo.com/c/product/1595392-REG/canon_eos_c70_cinema_camera.html
Canon RF 24-105 2.8: www.bhphotovideo.com/c/product/1793385-REG/canon_rf_24_105mm_f_2_8_l.html
Easyrig Minimax: www.bhphotovideo.com/c/product/1490500-REG/easyrig_erig_minimax_q_minimax_with_carry_bag.html
Canon R6: www.bhphotovideo.com/c/product/1547010-REG/canon_eos_r6_mirrorless_digital.html
Sigma 35mm 1.4 EF : www.bhphotovideo.com/c/product/898831-REG/Sigma_340_101_35mm_f_1_4_DG_HSM.html
Tascam DR-10L: www.bhphotovideo.com/c/product/1281085-REG/tascam_dr_10l_mini_portable_recorder.html
Light: www.bhphotovideo.com/c/product/1559567-REG/godox_led_rgb_light_stick.html
PHOTOGRAPHY GEAR USED:
Canon R5: www.bhphotovideo.com/c/product/1547009-REG/canon_eos_r5_mirrorless_digital.html
Canon RF 24-70: www.bhphotovideo.com/c/product/1502500-REG/canon_3680c002_rf_24_70mm_f_2_8l_is.html
For Wedding Inquires: www.ryanneedlemedia.com/
For Business Inquires: www.needlemediastudios.com/
Follow me!
needlemedia
needlemediastudios
NeedleMedia/
Subscribe → youtube.com/@NeedleMedia?si=t8DA80ExdRpMPwP9
zhlédnutí: 162
Video
This Recorder Made My Editing 10X FASTER - Zoom H2N Review For Filmmakers
zhlédnutí 1KPřed 2 měsíci
This Recorder Made My Editing 10X FASTER - Zoom H2N Review For Filmmakers
I Bought A $12 Tripod... Is It Any Good?
zhlédnutí 141Před 3 měsíci
I Bought A $12 Tripod... Is It Any Good?
Using Ai To Make This $25 Camera Shoot In 8K! (Ai Upscaling)
zhlédnutí 2,3KPřed 3 měsíci
Using Ai To Make This $25 Camera Shoot In 8K! (Ai Upscaling)
TOP 10 Wedding Videography Tips - DO NOT MAKE THESE MISTAKES
zhlédnutí 101Před 3 měsíci
TOP 10 Wedding Videography Tips - DO NOT MAKE THESE MISTAKES
40 Years Old Vintage Lens VS New Lens! Should YOU Invest??
zhlédnutí 414Před 3 měsíci
40 Years Old Vintage Lens VS New Lens! Should YOU Invest??
How To Film A Wedding As a Beginner - Quick Start Guide
zhlédnutí 127Před 4 měsíci
How To Film A Wedding As a Beginner - Quick Start Guide
This DEALERSHIP Didn't Know How RARE This Car Is, So We BOUGHT it!
zhlédnutí 14KPřed 4 lety
This DEALERSHIP Didn't Know How RARE This Car Is, So We BOUGHT it!
The GTI Has More PROBLEMS Than I Thought...
zhlédnutí 12KPřed 4 lety
The GTI Has More PROBLEMS Than I Thought...
How Much MONEY Did My DREAM BUILD Cost?!
zhlédnutí 12KPřed 4 lety
How Much MONEY Did My DREAM BUILD Cost?!
I Sprayed TRUCK LINER On My BIKE TIRES, And This Happen!
zhlédnutí 144KPřed 5 lety
I Sprayed TRUCK LINER On My BIKE TIRES, And This Happen!
I Sprayed CAR TIRE SHINE on my BMX TIRES, And this Happened!
zhlédnutí 25KPřed 5 lety
I Sprayed CAR TIRE SHINE on my BMX TIRES, And this Happened!
My DREAM BMX BIKE is FINALLY FINISHED!
zhlédnutí 33KPřed 5 lety
My DREAM BMX BIKE is FINALLY FINISHED!
My DREAM BMX Bike Is Coming Together...
zhlédnutí 34KPřed 5 lety
My DREAM BMX Bike Is Coming Together...
Do not use that shit on a bike ,car or any tire. Try taking the tire off after it's in the tire , like super glue on the bead and rim. You will need a chisel to get off.
I know this video is pretty old but I figured this may help someone who is currently looking into doing the same thing! I foamed my wagon tires and I made four holes on the same side of the tire! But the most important part is you need to take the tube out! You don't want the tube in there! You're going to also want to spray just a little bit of water in each hole, this will help the end result have fewer air bubbles in it as well! You're going to have an overflow! What I did was I let it come out of the holes for a good minute or two, then I plugged all but one of the holes and then wrapped the tires in plastic wrap (because it kept pushing out the bolts lol! Andi didn't have tape strong enough to hold them in place! I felt that plugging three out of the four holes helped it expand more to the tire instead of towards the holes as in it was denser without the risk of big air pockets ! Also WEAR GLOVES!!!!!! If you get it on yourself or anything you can use acetone to remove it before it cures! Make sure it is safe to do so for whatever material you're going to be applying the acetone too! You can also put some into a large zip lock baggie, toss the straw and nozzle into the baggie with the acetone and shake the hell out of it and use a qtip or three to get all that foam out of the nozzle and straw then use those qtips to add some to the spout on the can or just drip a few drops of the acetone in the hole of the spout on the can itself and you will be able to reuse it instead of it being trash!
Do you not read instructions the valve stem should be at 6 o’clock while filled and spin it after done for awhile. One can of fix a flat can easily fill a car tire it should do 5-6’bike tires. But you need a solid valve stem and solid wheel like a plastic one and no tube.
Depending on foam used it will have different density and hardness
Brake cleaner or super glue remover to get off habds
Dude 1 can would be more then enough foam to do two tires and the only way to do this is to open part of tire from wheel and spray a bunch in set the bead of tire then spin it really fast to spread it around
if i see u or tony in cuse im slapping tf out you
noodle media
It's water lol😂
Your on to something DO NOT KEEP SEEKING!!!!😊
Hi! it's easier to manual a freestyle scooter than a bmx bike?
Rochester Michigan??? Where you from because I'm from Michigan too about 15 mins away from Pontiac Michigan
Bought Raifords, not happy. Prefer United team grips on my other bike. Next time going for S&M Hoders. Awesome video Ryan 👌👍👊
TRY THEM DOOOOOOOOOOOOOOOA DONTTTIII
I watched your videos back when I was 14 and you were one of my favourite CZcamsrs, now I am 21 and thanks to influencers like yourself I’ve now got a career in bike mechanics and work for trek you taught me a lot of things that I use in my day to day life so thank you for making the videos, I’m glad to see you’re doing well Ryan ❤
I'd not wanna watch a movie bro
32 bit can't sound that much better, can it?
I Was going to order the new Zoom H1N and then canceled my order remembering that I have that same Mic as you. Then I see this video. It was a gift from my brother years ago and I hardly use it.
tear 4:32
The footage with that red camera looks like one of that old 2008-youtube videos with a jumpscare at the end
Nevermind I meant to the rim
Mine were glued and I hated it more than anything
Dam😊
You did not change your front tire and Amanda in 10 seconds you didn't even pump up the tire all the way and then second thing is you change the front tire anybody can change the front tire super fast it's not that hard you're not that good at changing bikes besides the fact you sound like you don't really know what you're talking about and you look
Who still needs help in 2024
NO WAY!!!!!
YES
Just glad to have you back!
thanks!
This is a bad idea! I bought a wheel from a guy and I literally had to CUT THE TIRE OFF! And the wheel itself looks like absolute garbage with the foam stuck everywhere. I’ve tried multiple solvents to remove it. But nothing works. If you do it, do it on wheels and tires you don’t care about. I prefer slime and tube liners
i'm 260lbs can I still use any bike under 400 to get into bmx?
yes
@@NeedleMedia idk because everywhere I look everyone says im too heavy to use a hi tensile steel frame and everything else is too expensive
7:50 is when it starts
Thanks bro!
@@NeedleMedia no problem 😊
❤❤❤
😍😍
Oh idk that looks fun, so flower men❤
Great choice!!
Flower Men...
For sure…
Not if they're going to act like idiots.
Have some fun!
The fanny packs😂
Actually gold😂😂
Made my day!
Glad to hear:)
Hahahahaha!! 🤣🤣🤣🤣🤣 They look like the Blues Bros w/out the blk suits! 😆😆😆😆😆
Bahahaha!!!
They need to make a 32bit version that has the same mic array. Internal shock mounting / real wind muff would be nice. They abandoned their old modular mic capsules, so I've left Zoom behind.
So true. What are you on now?
@@NeedleMedia Tascam Portacapture X8 for "X/Y", and a Audio-Technica BP4029 for "M/S" micing. I bet a Zoom F2 with a Rode VideoMicro II would work for a simple 32bit mic. I used one into one of the Tentacle Track E's I already had, and it sounds super clean. The things you can do with M/S in post is just too powerful to give up though, especially for the purpose you're talking about.
Untill they get home😏
Wow
I love
Right?!
Welcome back! Have you been hitting he gym? How much do you weigh now? Love the videos
Hey Mark, thanks for the comment. I have been hitting the gym lately! Right now i’m currently at 170. Thanks for the feedback!
Naw These Actually Cold and ayeee W First Comment hahaha
Legend!
Talk too much boring
Ope.
OMG Ryan. I'm rolling! This is freakin' great!
Thanks Jodi!!!
How r u?- bravo. breathtaking shots,see ya!Needle. 🤩
Yes, thank you
My kids are just starting to actually start riding, and i still ride too, so wed watch more bmx vids
Thanks for the feedback!
If you were a better filmmaker, you'd treat the interview like a conversation. Clearly he's totally capable of that. You simply ain't capable of making him feel comfortable. Shitty filmmakers.
This was 100% a joke and my friend. Unfortunately after 100000 interviews we can only do our best to make the interviewee feel comfortable. This was an exaggerated skit, thanks for watching and the comment though!
Underrated
Appreciate you big dawg🤘🏻
very realistic
much real
that tripod had a family 😢
Not anymore…