Video

Please stop twisting those bolt cutters.

Great video, very informative! Could you not just use the light on it's side to stop it falling over?

What about the 8 inches... The new one,,, is It better ?

This is $14.99 at Home Depot..

Inaccurate comment on the desirability for HP batteries on this tool as it doesn’t even have the additional electrical contacts to make use of the extra performance of HP batteries. Regular Ryobi 18V batteries work just fine with this tool to gain the benefits of the brushless motor and is what comes with the kit (saw, battery, charger) product. Otherwise the chain tensioner knob setup works perfectly well in my experience. Much easier than bringing out the spanner.

I have one and and haven’t had a problem. I also have the Milwaukee m12 it’s only used for small branches 3-6 inches that one has a larger battery than the Milwaukee they all will stop through thicker branches so you don’t burn it out if you don’t push down and let the tool do the work it’s fine they say it’s a oil free chain although it doesn’t have a oil compartment like the Milwaukee so they are saying to take the cover off and clean the saw dust then spay lubricant on the parts but I still oil the chain.

As an aerospace design engineer I understand your overall comments about the product, yet I'm dubious that you've ever met a product in which you did not believe you could have designed to be significantly better :)

Thank you for this video. Even though I have a Homelite saw, this was very i formative.😊

As for the gauges only going up to 120psi.. How would you know if the tank is being over-pressured if you are not measuring it? Fill it up on a freezing morning, and then look at the pressure once the day warms up. If it stopped at 120, how would you know what pressure it is?

before saying it has plenty of power maybe compare to specs. When one expects 1800 in-lb but only gets 800 that is NOT plenty.

They should've at least included the screw for the belt clip.

Like the tool. It is better than using a poll saw. Thank you for the review!

Enjoy your channel!

Where did you buy it I have the same one, with the orange stripe down the handle, seeing some subcompacts that only have a solid grey handle, did we buy fakes?

To me most important info is MPS chain speed, HD list it at 21 which is pretty good, but I just cant stand that upside down/sideways battery placement. It works good on their skill-saw but not chainsaw....

Good review!

I can't get that blue bastaard off! You don't go over pulling it off, but it looks like yours is fairly loose. Mine won't budge!

Yeah, I'm thinking my old ryobi honda powerwasher will be used as a pump and getting this

The chain keeps popping off on mine

1) I have no problem modulating lower speeds. That's why it's a 2 speed drill, put it in the lower speed. 2) It does have a ratcheting lock for the chuck. Maybe yours is gummed up, or you just didn't try? I haven't had any problem with bits coming out, maybe if it's something tiny like 1/16". 3) It's a homeowner grade drill, not really meant for (larger) auger bits. Any tool, you have to put in the context of what it's meant for vs the cost. I don't ever put the handle on. 4) The best way to look at it is a drill that uses the same batteries as all your other Ryobi 18V products. I would not buy only one Ryobi tool if a type of tool where you can get Milwaukee, or Dewalt, etc contractor grade instead as a drill is so versatile and often the first cordless tool that someone buys, but at the same time you likely don't need all your drills to be premium quality, just the ones that do the toughest tasks. This drill is for when you don't need that.

Mine stopped oscillating. Piece of crap.

Im most interestsd in the lights runtime on that 4ah battery.

Are you in a race? Slow down so you don’t stutter and stumble and we can understand what you are saying

Does anyone knows what type of bit I need to take the screws out the housing to be able to clean it I

My brush stopped spinning on this vacuum, and the light won’t turn on. Can anybody help me on what could be wrong?

Like the review, music and slow motion photography!

Thank you. Very useful review.

Definitely been thinking about getting this saw

I ordered this from Walmart as well. It seems to be DOA. It won't charge or turn on. Any suggestions?

What cordless brush cutter do you recommend?

DID YOU TEST THE RUN TIME? IT DOES NOT LAST 18HRS HIGH OR 9HR HI

so much review detail, thank you!

Nice video! Works tools have got a lot better than the past works tools. That saw is ok. Big fan that you can hook up a shop vac. This is is good for what is cut. Have a good day’

no good when it brokes down the company des not stand behind its product so I give a -1

What about the adjustable oiler on the bottom of the saw?

Very good review. Thanks.

Maybe? This seems cheap. For how often I use a pole saw I would be fine for me. Hyper Tough tool have got a lot better now. Thank you for the review!

Jammin the weedeater into the brush is not the right technique. This was difficult to watch.🫣😕

what is the differance between this model # RY40250 and Model # RY40ST01K. 40V Expand-It Cordless Battery Attachment Capable String Trimmer

Show how it cuts and wat it can do. WE all know its for DIY

I just bought one and my battery fits tight. Wonder if they made some adjustments to it.

Would the hp battery work

You talk to fast.

i saw a vid where someone powered their fridge for a couple hours on this! sweet.

is there a way to daisy chain 2 or more of these together for more power or longer duration?

I’ve had mine for nearly a year and recently it stopped retracting the plunger so it’s leaking caulk. I haven’t dug into it yet but that’s pretty important so you’re not making a big mess. Good review my brother.

DONT EVER EVER BUY THIS PRODUCT. why??? ANSWER === if you ever lost a charge cable, or if your charger cable ever stopped working, then DON'T BUY this "EVERSTART MAXX" (the product in this video) SINCE YOU WILL NEVER EVER be able to use this flashlight ever again, since YOU WON'T BE ABLE to charge it up ever again (IF YOU EVER FIND IT, PLEASE PLACE THE LINK HERE). === you will need to look for a very rare unique exclusive hard to find USB to USB CHARGER CABLE. IMPOSSIBLE TO FIND it ON AMAZON OR ON GOOGLE (DID YOU FIND IT?? HOW MUCH YOU SPENT ON THE TASK, HOW LONG DID IT TAKE FOR YOU TO FIND IT, HOW MUCH YOU SPENT TILL YOU FOUND IT??).. I have already spent 4x the price of this product on AMAZON trying to find the right cable...and SO FAR, I HAVE NOT BEING ABLE TO RECHARGE this product. APRIL 2024. I gave up....and will just F***** burn it in the firepit W.I.T.H. A F.U.C.K.I.N.G. TREMENDOUS PLEASURE. if you are looking for a very unique and extraordinary wild f.u.c.k.i.n.g. pleasurer, then you buy it (lose your money), but then BURN IT with that revenged pleasure as though you accomplished something in life. (NOTICE: I do have all kinds of cables for: all GOPRO products, ALL SONY products, ALL Marantz cable products, ALL Bower & Wilkins cable products, ALL Rotel Products cables, ALL LG CABLES, ALL DJI drones cables, ALL gimbles cables, ALL kinds of batteries cables, ALL ADTs cables, ALL small speakers cables, all headphone and all headsets cable, all Bluetooth speaker cables, ---------------> NONE (N.O.N.E.) NONE WORKS WITH THIS PRODUCT. so if you really want to be the dumbest person in the planet, then you buy this product after reading this and make a video on CZcams and TICKTOCK.....face-turquoise-covering-eyesyt3.ggpht.com/H2HNPRO8f4SjMmPNh5fl10okSETW7dLTZtuE4jh9D6pSmaUiLfoZJ2oiY-qWU3Owfm1IsXg=w24-h24-c-k-nd

I have this chainsaw in the U.K. and it’s brilliant

Yeah, the focus beam is too strong. Who out there could make the best generic battery powered handheld light? Seems every brand is missing the mark at design when it comes to making these cheap lights. They are always screwing something up, or forgetting a feature. These companies have the R&D budget to make something like the multi pattern hoes nozzles for flashlights. That's what i wanna see.

You really cover lots of features of the different tools...