![Rubber Duc](/img/default-banner.jpg)
- 75
- 3 747 919
Rubber Duc
United States
Registrace 6. 03. 2007
Thanks for reading about my CZcams channel! My channel is dedicated to my passions, which is film making in the automotive and motorcycle world and short films. I also try to cover how to videos and product reviews, so please subscribe and thanks for visiting.
Porsche Cayenne Repair Wire Harness Corrosion Ignition Fault Water Intrusion #porschecayenne
In this video I show how I repair a Porsche Cayenne that was a paper weight due to water intrusion that caused wire corrosion on the main harness splices.
zhlédnutí: 164
Video
How To Mount Tires On Freshly Painted Rims - Harbor Freight Tire Changer Spoons Minimize Scratching
zhlédnutí 270Před 3 měsíci
In this video I show the method I use for mounting lawn and garden, mower, tractor or any other tires on a freshly painted rim to do as little damage as possible to avoid scratching the fresh paint the best way I can.
Craigslist Barn Find - Junked Simplicity 4208 Riding Mower - Free For Scrap - Will It Run Again?
zhlédnutí 120Před 10 měsíci
In this video I picked up a free Simplicity riding mower that someone had listed as free for scrap on Craigslist. I give it a shot to try and repair it and bring it back to life and restore it to running, driving, and mowing condition. What should I do with the mower if I can bring it back to life, flip it or turn it into a cool restored mower for the yard?
Scag Hydro Static Walk Behind Mower Basket Case - Can It Be Saved? - Part 2 Will It Run?
zhlédnutí 104Před rokem
In this video I continue work on the Scag walk behind mower. The parts are in and I attempt to repair this mower and get this old beast running again.
Scag Hydro Static Walk Behind Mower Basket Case - Can It Be Saved? - Part 1
zhlédnutí 84Před rokem
In this video I show you the latest project to come into the shop, a Scag Hydro Static heavy duty commercial walk behind mower that is a total basket case. Can it be saved, will it run again, stay tuned to find out. In part 2 I will attempt to repair the motor and see if I can get it to run. From there I will continue to fix this mower to the point of hopefully being able to fully restore it.
Cheap Welding Cart Build From Scrap Metal And Busted Pressure Washer
zhlédnutí 373Před rokem
In this video I build a DIY welding cart from scrap metal and an hacking an old busted pressure washer on the cheap.
Repair Hack - How To Fix Broken Wiring Sensor / Connector Plug Clip To Make A Factory Looking Repair
zhlédnutí 119KPřed 2 lety
In this video I show a hack I came up with how to fix and repair a broken sensor clip that is found in most automotive wiring harness applications like ignition coils and sensors like MAF and IAC valves, etc. This hack will work on any sensor or connector plug that has a brittle push clip that breaks and not look horrible like the zip ties repair.
How To Split Wood For Weaklings - Splitting Large & Tough Rounds By Hand With A Splitting Wedge
zhlédnutí 89KPřed 2 lety
In this video I demonstrate how a weakling can use a splitting wedge and mallet to slowly and methodically split large, tough wood rounds by hand. It is no where near as fast as a wood splitter, but if you have the time and patience you can get it done.
Diagnose & Repair Toyota / Lexus RX350 3.5L V6 Engine Code P0300 - Random Multiple Misfire
zhlédnutí 16KPřed 2 lety
Diagnose & Repair Toyota / Lexus RX350 3.5L V6 Engine Code P0300 - Random Multiple Misfire
Super Split Log Splitter & Toro Dingo TX420 Working Some Firewood - Micro Homesteading
zhlédnutí 1,2KPřed 2 lety
Super Split Log Splitter & Toro Dingo TX420 Working Some Firewood - Micro Homesteading
Let's Cut Wood With A Giant Of Old - Homelite Super XL Automatic Chainsaw
zhlédnutí 23KPřed 2 lety
Let's Cut Wood With A Giant Of Old - Homelite Super XL Automatic Chainsaw
Stihl 015 Arborist Chainsaw Repair - Fixing It Forward For A Neighbor
zhlédnutí 10KPřed 3 lety
Stihl 015 Arborist Chainsaw Repair - Fixing It Forward For A Neighbor
$20.00 Fuel Pump Fix? How To Change A Fuel Pump - John Deere Gator HPX 4X4 UTV
zhlédnutí 22KPřed 3 lety
$20.00 Fuel Pump Fix? How To Change A Fuel Pump - John Deere Gator HPX 4X4 UTV
Vermont Castings Intrepid II Barn Find & Restoration Part 2 - How To Turn A Handle On A Wood Lathe
zhlédnutí 2,8KPřed 3 lety
Vermont Castings Intrepid II Barn Find & Restoration Part 2 - How To Turn A Handle On A Wood Lathe
Vermont Castings Intrepid II Craigslist Barn Find & Restoration
zhlédnutí 10KPřed 3 lety
Vermont Castings Intrepid II Craigslist Barn Find & Restoration
Chopper 1 Splitting Axe Review - A Very Unique Axe
zhlédnutí 9KPřed 3 lety
Chopper 1 Splitting Axe Review - A Very Unique Axe
Building A Budget Beast - Episode 10 - Turbo Honda Accord Back Story & Update
zhlédnutí 3,6KPřed 4 lety
Building A Budget Beast - Episode 10 - Turbo Honda Accord Back Story & Update
Cannondale Super V500 MTB Restoration Part 4 - How To Install Bicycle Rim Tape Tubes & Tires
zhlédnutí 3,2KPřed 4 lety
Cannondale Super V500 MTB Restoration Part 4 - How To Install Bicycle Rim Tape Tubes & Tires
Cannondale Super V500 Restoration Part 3 - Installing Bicycle Shifters Brakes Front Back Derailleurs
zhlédnutí 2,8KPřed 4 lety
Cannondale Super V500 Restoration Part 3 - Installing Bicycle Shifters Brakes Front Back Derailleurs
Cannondale Super V500 MTB Part 2 - Installing Bicycle Shifters Headset Stem Handle Bars Grips
zhlédnutí 3,5KPřed 4 lety
Cannondale Super V500 MTB Part 2 - Installing Bicycle Shifters Headset Stem Handle Bars Grips
Challenger RJ3.5 Rolling Jack Overview & Review
zhlédnutí 8KPřed 4 lety
Challenger RJ3.5 Rolling Jack Overview & Review
Craigslist Barn Find & Restoration Part 1 - 1997 Cannondale Super V500 Mountain Bike - V 500 Rescue!
zhlédnutí 11KPřed 4 lety
Craigslist Barn Find & Restoration Part 1 - 1997 Cannondale Super V500 Mountain Bike - V 500 Rescue!
How To Properly Clean Porsche 955 Cayenne Base S And Turbo Drains - VERY IMPORTANT
zhlédnutí 14KPřed 6 lety
How To Properly Clean Porsche 955 Cayenne Base S And Turbo Drains - VERY IMPORTANT
Wheel Cleaning | Technique & Tools - How To Safely & Efficiently Clean Your Car's Wheels / Rims
zhlédnutí 625Před 6 lety
Wheel Cleaning | Technique & Tools - How To Safely & Efficiently Clean Your Car's Wheels / Rims
Engine Detail - Safe Method On How To Clean Engine Without Water On Turbo Honda Accord
zhlédnutí 8KPřed 6 lety
Engine Detail - Safe Method On How To Clean Engine Without Water On Turbo Honda Accord
Building A Budget Beast - Episode 9 - Part III - Turbo System Installation
zhlédnutí 9KPřed 6 lety
Building A Budget Beast - Episode 9 - Part III - Turbo System Installation
Valve Cover Restoration - How To Remove & Paint Valve Covers
zhlédnutí 8KPřed 6 lety
Valve Cover Restoration - How To Remove & Paint Valve Covers
Building A Budget Beast - Episode 9 - Part II - Installation Considerations
zhlédnutí 6KPřed 6 lety
Building A Budget Beast - Episode 9 - Part II - Installation Considerations
Does the engine light turn off rite after removal and replacing?
Weakling here. This video gave me a chuckle
Still have the turbo accord?
Yep but she is in sad shape :(
I want to turbo charge my accord but i am trucker and dont have home time. Do you have a shop i could take it to?
No sorry, just did it to my personal car.
@@RubberDuc i understand, where could i buy the missing link you used
The internal plastic parts in the plug are made of crappy incorrect plastic and tend to crumble. Best solution is to buy cheap Chinese replacement plugs and insert the existing contacts/wires into new plugs. The life limited flexible parts REALLY should have been on the coil side.
Please wear gloves and safety glasses
What bar length is that?
25"
Must have more than one wedge!
Time is money, just use the same RTV and put a dab across the top of the connectors to seal it together. It will also be intuitive to the next person who has to service it when they see the RTV, and they know to simply slice it apart with a blade to release.
You cheated bro
Not always it's the simple😅save a lot money 😂
I've used my Husqvarna axe a bit. As long as it small enough to put in the wood stove all is good.
very informative video. Lots of repair videos on your channel, Are you up for a collaboration? Hipa supplies parts for small engines and maybe we would work together to help more people in the community.
Good video this helps a lot thanks 👍🏾
What was the serial for the bar you used? I have one that runs like a top and i cant find a bar to save my life
even though that solder will hold for now, a better way is to start off how you did with the iron tinned by solder. But then holding the iron against the wire and waiting 2-3 seconds and allowing the copper wire to get hot enough. You want the copper wire itself to be hot but not enough to start melting the insulation near it. Once the wire is hot enough, applying solder you can watch it wick into the copper strands. You shouldn't have to "wipe" any of the solder on, it should flow on naturally. Using thinner solder will be easier and flow better on the smaller gauge wires. 0.032" solder is perfect for general car wiring, anything larger and you need an excessive amount of heat to actually get the solder to melt and flow into the joint.
Thank you! 66 yr old lady with an oak lying in my driveway. The chainsaw work was fun, (10” Black and Decker 20V cordless - I can handle it safely) but if I can split it folks will be delighted to take it away. Firewood is a commodity. Tree parts are trash. 🤔
Full video up, link updated on the short.
Just sorting mine now after hearing about the blocked drains that plague these vehicles 🤔I’ve made a secret cut on the carpet passenger side (right hand drive car)so I can quickly lift and check for damp and check the main wiring loom, I’ve made clearing the drains with a large bottle brush part of my cars service👍oh and whilst I’m here thanks to the nob who pushed the rubber drains up into the hole only to block them even more 😐good job 👎
Yes, terrible design, I think even if the drains don't get blocked with gunk in a really bad long rain you could have an issue unfortunately.
YES! Thank god. Why didn't I think of that. I have thought how poorly it's designed. Thanks for posting this.
Great video! Love the references to Christ. Would you say that the main use of the Estwing Sure Split Wedge is for large rounds? Is it worth it if you're not generally dealing with a lot of large rounds? I have an 8 pound maul but am looking for something easier for the stubborn logs.
Hi, I would say having one is a good idea (not sure it is the best choice out there though) just because if you are wanting to do it easier (albeit slower) it is a good option to have I would think, thanks for the comment.
What is the part number ?
For a 66 yr old woman with a yard full of huge maple rounds, this was informative. I may (or may not) split these rounds myself, but understanding the process helps me understand How Wood Works - which seems to be my new passion since moving to Maine and living with wood stoves. Thanks a million!
Exactly where I am right now. It sounds like I need a sleeve and some wedges.
Great humor, and I loved the vocal from 2001 Space Odessey! Once quartered, I put those pieces on my 5 ton HF electric and knock em out! HA HA
At least I'm not the only one who got an ash whoopin!!!!
No wedge, just chisels. All sunk in with no split. Now what???? Also ash!
I made some wedges out of a white oak limb. For the chain saw assist method they worked better than my metal splitting wedge. Eventually discovered that a 8 pound Fiskars splitting maul was best. Don't swing the Fiskars maul hard. Let the weight of the maul do the work. Hunt for an existing crack if possible. Keep hitting the round in a line going across the round. It always comes as a surprise when it starts splitting. The wooden wedges really work great on that first crack.
The xl 12 no load runs around 9,000 rpm. Under load 6,000 rpm. Slow and Very loud! But also very dependable!
Will cool you share links of your cool tools you are using 😜
🎧🤪 🪵 🫶 Thank you so much for sharing 🙏 I wishing you a beautiful day to you and all your viewers. Much Love Thierry ❤️˘◡˘❤️
This was really funny, but also good info. Like the John 3:16, too
When I add fuel it just drains out the bottom of the saw. Does the fuel line connect to the tank with a rubber hose or is it a metal tube connection that connects to a rubber tube. It ran last fall when I put it away.
I'm glad I'm not a weakling.
Record the work you do I’m interested in seeing all of it
You can see the sun moving through the video that this log took him over 8 hours to split
Or maybe it isn't all in one take :)
Use a ratchet strap. Takes 2 minutes.
Ratchet strap wouldn't work on this one :)
Ur supposed to use big handfuls of the mounting compound so it goes everywhere when you hit it with the blaster 😂
Never do this without using the maintenance stand, and a warm engine. All oil is drained and filling is more accurate. Motul oil is the only decent oil for these very sensitive engines. Torque settings are also important, steel plugs into an alloy moulding can be a recipe for disaster.
Motul is not the only decent oil, four 20 year old Ducatis each with over 50,000 miles and 2 150,000+ BMW's in my stable using Rotella T6 begs to disagree with you. Motul is fine and I would never suggest you not use it if you are happy. I do agree however that a maintenance stand should have been used, he also didn't start the motor and check the level with the bike standing upright.
lol 😂
I can see this bonding the plugs together so when it gets removed next time you have to get a new pigtail and whatever component you plugged into.. cuz its either gonna rip the wires out or pins out one..
I feel your frustration, sir I am a mechanic myself and I said the same exact thing you just said they are complete idiots. I don’t know why they do the things they do sometimes it’s beyond me. I just don’t get it. The things we face with disguise people have no idea.🤣🤣🤣👍👍
That mallet is probably lighter than the wedge, try a bigger one next time
Noodle the beast.
Did you forget the o-ring?
Im a retired tree surgeon , and have split many rounds of wood in my day. After using the chainsaw, drop a little sand into the groove before putting the wedge in. Even live oak will give it up
Excellent video. Ordered one now. So much bad press on duster. Thank you
Struggled with splitting logs before. Now, it’s much easier. Thanks for the advise. 👍
Hi just been investigating how to do this for my own channel (UK based) loved the 2001 Space Odyssey theme, I think I prefer yours to the original. Got myself a fiskars x27 recently but will try the wedge method in my next vid as I have some ash rounds to split. Love your ethos, blessings.
Never had that piece break always the clip retainer on wiring plug ! Be helpful to be able to fix those !
Lifesaver, thanks!
Others tips are: Get an additional Grenade wedge. It is plus (+) cone shaped but has a point to dig into the wood. I start > 6” in so you don’t just nibble off little bits at the end. Use 2 or 3 wedges. Do this SITTING DOWN. Grab a 2nd round or 5 G pail to sit on. RELAX! Stand and slam it each wedge home with a sledge hammer, if needed.