Video

Sorry can the snow blower be hooked up to the huina wheel loader

Yes, that should work just fine😉

Good to know

It's just the original plastic bruder weight that comes with the toy tractor. I have seen a few different brass options over in germany though😉

@@FMDRCConstruction Thank you for the reply. I have the same tractor and i am looking for accessories for it , especially a plow or harrower than fits it.

Not to many options out there ATM. Am working on some stuff i hope to have ready soon😉

@@FMDRCConstruction that sounds great. i will keep an eye out for that.

They seem ok so far. The tractor definitely struggles a bit when it's wet or ground is loose or sandy. Not sure if different tyres would help though.

Thank you🙂 as far as i know, a few supplyers offer these. Depending on builder, they do vary some, both in details, weight and internals. This was bought from Cleo B, at hydraulic hobbies😉

Definitely😊 Any ideas/suggestions?

@@FMDRCConstruction www.google.com/imgres?imgurl=http%3A%2F%2Fwww.holmeswelding.com%2Fimages%2FIMG-6842.JPG&tbnid=DQFTMPfK1Lt8QM&vet=1&imgrefurl=http%3A%2F%2Fwww.holmeswelding.com%2Fdumpwagons1.htm&docid=mSoaoNpn-LygUM&w=740&h=500&itg=1&source=sh%2Fx%2Fim%2Fm4%2F2&kgs=7b1d0f1a0b889977&shem=abc%2Ctric#imgrc=vD54haAYyHyt3M&imgdii=DQFTMPfK1Lt8QM&ip=1

@@FMDRCConstruction Holmes dump wagons. Think this trailer would be a good match

Thank you😊 very impressed with how capable both of these are so far🙂

🥳

Every large scale Rc operation needs some rock trucks😁 and these bruder conversions are increadibly good and durable, especially considering cost. Ours are usually driven by 5-10 year olds😉 And when using Child Labour, you cant expect them to be patient and wait long for a load. The big Cat's 2 passes usually does the trick😊

You're welcome😉 there is no gearbox/option for only rwd. White not entirely lmpossible to modify, space is tight. Without difflock engaged, it's got decent turn rate with 4wd though.

Heritagercconstruction.com 😉

Agreed😉 there is a strange elegance over how this beauty moves for sure😊

Once our current project is done, we will be finishing up this😉

It feels good so far, but we will revisit your question when we have had some time to test and review it😉 Biggest negatives so far, is the mounting of the bruder parts, and the rear lift. As long as the drive proves reliable, I think the good will outweigh the bad.

Now that winters done and the ground is thawed, we will try ti do that😉

Thanks🙂 Almost 140lbs if my conversion is right😉

Hydraulichobbies.com😉

Thank you😊 -glad you liked it😉

Very good😮

@@albertoregazzi2942 thank you😊

These are bought, but id reccomend just getting chain and clasps, as you will have to adjust them alot anyways😉

@@FMDRCConstruction But did you buy these or did you make them yourself?

They were bought, but we had to take them apart, and shorten all the lengths, so just as much work as making them yourself.

😊

Thank you🙂 it's a simple, but effective way to sort material🙂 most 25mm+ diameter vibration motors will work for this😉

@@FMDRCConstruction merci pour ta réponse , peut tu nous faire voir ton type de moteur ? Et où est t'il logé ? J'aimerai voir le système

3-5000$😅

🤫 nothing interesting at the end🤫 😉😁

🙂

Design is available to download😉cults3d.com/en/3d-model/game/rc-twin-spin-snowblower-fmd-norstates

@@FMDRCConstruction thanks

Just got our chains on acualy😉👌. Tbh, I prefer putting chains on real trucks over the tiny rc ones😆 it was a tedious job🙈

Thank you🥰

Sorry, no metal version. No issues with the 3d printed one so far though😉

Sorry to hear that, but we apreacheate the feedback nonetheless🙂👍 hope you enjoy some of our other videos, Merry Christmas🎅

@@FMDRCConstruction I will watch your coming videos (without music) 😉 Merry Christmas 🎅🏻

🙂

If we have time, we'll look at doing one😉

@@FMDRCConstruction Fair enough! Thanks for your time.

It's just clamped around the stick. You need an extra esc, and there are free slots for the extra switches on the reciever inside machine😉

😊 thank you. Maybe you could borrow some unused land/plot from someone locally?

The bucket is a standard kabolite loader bucket, with the teeth cut off😉

@@FMDRCConstruction ohh 😮 really any videos of you doing so just I thought was a 3d printed improvement version

@@FMDRCConstruction had to stop the video a good few times but thanks 😉

@markconnors3269 the linkage is 3d printed, but the bucket is just an extra oem we picked up on aliexpress. Seemed like the easiest solution for once, since it only cost about 15$ at the time😉

What did you do differently with the link? I would like to make one in metal if you don't mind? TIA

Understandable🤔 Only real issue we have had with this, is replacing the brushless track motors. Main (huge) negative is the size when it comes to transport and storage. If you are 100% prepared to deal with that, then the size is awesome😁 no trouble with bolts or track links.

Thanks for the answer ;) appreciate it.@@FMDRCConstruction

cults3d.com/en/3d-model/game/bruder-xd-5000-rc-conversion-fmd-norstates-4x4-adt 😉

Thank you🙂

Thank you. Hope to release the files sometime around Christmas😉