Video

I thought this would be pointless but cleaning it fixed everything !!

I was a born in 2016

That's funny said it wasn't picking up 😂you really didn't answer the question! I mean if it's not picking up then how would water be in the dirty tank !!!!!

So helpful!

My carpet cleaner didn't dispensing water?

Can you show me how to disassemble the brush’s so I can clean them.

You probably need to replace the dust filter.

Terrible carpet cleaner. Very Loud, cheap quality and has poor suction because it has NO weight on the suction nozzle! The carpets are left wet! PLUS the brush roller is really rough and tears your carpet fibers. The hose is cheap and is terrible. The sprayer has a problem where I had to drill it into the plastic to get it to spray. NOT RECOMMENDED!!!

I can't understand what he is saying when giving his email. Did anyone else get it?

So after many of you didn’t find this useful at all I however am in the same boat 😂😂😂 but on the plus side I had the same non sucking issue with my Hoover and I simple dumped a small section of water on my cart pet and surprisingly it fixed my issue. I have a lot of dog hair so I believe it cleared a path so it would start sucking again. Kinda wish my ex would clear a path 😂😂 hope this helps

My vacuum does not want to suck water back up

Tanks sooooo much

It was the door on the front of the machine for me my wife used the attachment to clean the couches so much it would stay shut 😂 taped the door down work like new thank me later ✌🏾

I’m just here for the fire music 🎵

Thanks so much, I hadn't used it in a while and replaced the front suction part incorrectly. I had no suction at all. Your video showed me that I needed to hook the suction part underneath then latch on top. So simple, but made me crazy for an hour. Thanks again.

I watched your video and thought this is a stupid, useless video but I'll give it a try. Guess what, it WORKED. Thanks

Do not email the email address listed above! You will get blocked 😒

My power path pro xl works great. I make sure the top and bottom are put in bottom first and I hear the "snap" on both. No problems with spraying when I hold the trigger as instructed and released when pulling back. My problem is the sealer around the inside of the dirty water tank. When I take the cover off to clean it, the sealer is difficult to put back it. Is there a demonstration to show how to do it?

The sealer on my dirty water tank won't stay in. How do I put my tank back on and keep the sealer in place? It won't stay in on my hoover Power path pro xl.

One of the worst customer service experiences I have. Impossible to talk to a human and ask questions. It takes hours to connect with a human to chat.

I need to see the black machine Model No 25A3W

With the tanks removed & powered on, if you feel suction with your hand than odds are good that the above recommendation can work for you, I myself was surprised to see a minuscule amount of hair in the light green plastic piece inside the dirty water tank & sure enough after rinsing it out suction resumed.

mine (new) does not seem to expell fluid and certainly won't suck any up...

My husband took the bottom part apart to clean it, put it back together and now it won’t work correctly.

Help me please why mine trow the water in the back make a lot mess is new🫤

Mine is leaking water/solution all over the floor and brushes are not working. Please help

I have absolutley no suction on my hoover carpet and upholstery cleaner, I checked to make sure tubes were all connected, i cleaned everything, Nothing, Even when i put the hose in the cleaning port it does nothing, No suction at all, It's only a year old, How do i fix this??

It doesn't I used this machine 4 times now water doesn't come out or suck up water you guys always say the same stuff I keep Mt machines clean and they all do the same thing. Every one I have purchased and they gave this company multiple chances to see if u might make one that works better it's always a disappointment. No more money coming from me. Done with your junk products.

Per my water tank, the stoper activator on the bottom just slips out through the bottom now. I suspect the rubber donut has shrunk. Any parts replacement for this? Thanks

Oh okay... Keep it clean, hadn't thought of that lol.... I'm throwing this cleaner in the trash, worst purchase everrrrr

The way it is designed the dirty water tank will not secure down tightly, I can't get the thing to just "Pop" in easily, and then when I try to use it, it won't suction. It's a Piece of crap and I wish I hadn't wasted my money. I have tried EVERYTHING to get that top of the dirty water tank to fit down tightly, and it will NOT. YES, I made sure it was in the little front latch to hold it down correctly, but when I flip up the back latch, then try to secure the top, it will NOT pull it down tight enough, so it's difficult to get it to fit in the area dirty tank is supposed to go, and because the dirty water tank top won't snap down tightly, it won't suction! This is a manufacturer fault, not an owner problem!

Just read the comments and I have the same problem. Mine is not suctioning the water. I did all troubleshooting and still the same.

Dont buy this carpet cleaner, lasted about 10 minutes before it completely broke, wont turn on anymore. It worked great for the 10 minutes it lasted but for the price I would get literally any other carpet cleaner.

Mine leaks the whole tank of clean water. Line empties on its own

So a friend gave me this as a gift and I filled the clean water tank with the cleaner fluid and began using it but when I come back with it there is no dirty water in the bottom tank. What am I doing wrong? Am I really that dumb? Lol I read the manual I’ve looked on CZcams I’m just I’m lost I don’t know why it won’t pick up the dirty water it releases The cleaning fluid water mixture and it vac it looks like it vacuums back up when I bring it back but there’s no dirty water in the water tank. Bone dry! I’m going to feel so much more stupid if it’s such an easy solution

This guy is not helpful

Pointless Not working piece of garbage!!!!

My belt is still on my vacuum cleaner it's fully functional with the exception of it is not working. Motor is working as well.

This did help, I saw that no water was being extracted. I took off the bottom tank and noticed that the little screen filter at the top was dirty. I cleaned the screen and then made sure that the lid and clamps were secure. It started working, not sure if maybe they weren't securely closed right or maybe the filter. Thank you It doesn't hurt to try it more than once.

Tengo la primera pero cuando le doy para atrás se sale todo lo sucio que hago

Pointless…

so by trouble shooting did you just mean to say clean the tank? that's not called troubleshooting. that's called maintenance.

Still not working

Thanks this was completely useless

Completely pointless because unless people are morons they tried all these things and it’s still not suctioning of course people know to like make sure the hose isn’t clogged.

So I've done everything to my Hoover and it still won't pick up the water from the carpet no suction there is section but it's not doing it so I don't know what to do I did customer service but since I don't have warranty anymore they we troubleshoot it but that's all we could do and it's just not working so I don't know what to do.

Thanks! My hose wasnt seated! One minute fix thanks to you! My husband was threatening to chop it in pieces! That was my motivation to fix it I guess.

The water is not being extracted into tank

Do you have any idea why it will not spray?

And if the brush is working but the sprayer is not - Is there anything else we can do to troubleshoot? I agree, I’ve also got a 25A3, would be nice to see that one as well.