- 78
- 205 359
tomasw22
Sweden
Registrace 13. 05. 2010
Got a web site that going to help you learn CNC programming, CAD, CAM and more, check it out, www.tomasw.com
Better instruction videos?
www.patreon.com/TomasW
I like to make how to-videos for everyone that need that help and for myself to remember things I'v learned.
I also use the videos in my Education, teaching CAD, CAM and CNC on a technical secondary upper school
all fusion videos on same Place?
only for android play.google.com/store/apps/details?id=com.wFusion360instructionvideos_7335398
all NX videos in same Place?
Only for Android play.google.com/store/apps/details?id=com.wNXinstructionvideos_7396008
While im on it, CNC G-code guide for Android
play.google.com/store/search?q=cnccodingguide&c=apps
Better instruction videos?
www.patreon.com/TomasW
I like to make how to-videos for everyone that need that help and for myself to remember things I'v learned.
I also use the videos in my Education, teaching CAD, CAM and CNC on a technical secondary upper school
all fusion videos on same Place?
only for android play.google.com/store/apps/details?id=com.wFusion360instructionvideos_7335398
all NX videos in same Place?
Only for Android play.google.com/store/apps/details?id=com.wNXinstructionvideos_7396008
While im on it, CNC G-code guide for Android
play.google.com/store/search?q=cnccodingguide&c=apps
milling a hexagon bolt
yep, the feed is far too low. Just trying out the siemens mill cycle for hex milling.
Going 800mm/min, 3000rpm, but could have done 2000mm/min or more.
the surface pattern is from a much harder cut that turned the bolt head in the chuck..
Going 800mm/min, 3000rpm, but could have done 2000mm/min or more.
the surface pattern is from a much harder cut that turned the bolt head in the chuck..
zhlédnutí: 213
Video
milling in steel
zhlédnutí 81Před rokem
Testing the machine after a repair. Used the Sinumerik 828d mill cycles . Abene TNC retrofitted with Siemens Sinumerik 828d.
olds cutlass 455 idling, from VHS
zhlédnutí 95Před 2 lety
old VHS video, but the sound is nice I do not know about the camshaft, but it should be a W30-ish cam or worse. got ported E heads, Forged pistons, Edelbrock 800, and headers olds 455 idle Still have the car, but have not used it since 2013 because of some bad engine bearings. got some more vids from that same vhs-tape, of that car, not some home prn
adaptive clearing Fusion 360 and machining (CADCAM)
zhlédnutí 163Před 2 lety
Example of 2D Adaptive clearing in Fusion 360 Milling machine: Dekel Maho (DMG) DMU 80 T. The action cams are broken, iPhone-filming thru glass (got a gopro10 just after, so next video..) May add more info if anybody needs it, cam-file, CNC-program and chosen cutting values on cnccodinguide.blogspot.com/, just ask
broaching a slot/ keyway in cnc, explanation on the blog (scroll down for link)
zhlédnutí 322Před 3 lety
here cnccodinguide.blogspot.com/ CNC Broaching Blind Internal Keyway
NX, right plane (CSYS) from the start, manufacturing
zhlédnutí 112Před 3 lety
disclaimer, may just be in elier version of NX, in NX7.5 this is this for real cnccodinguide.blogspot.com/2020/12/nx-right-plane-csys-from-start.html NX can be a jerk if you do a manufacturing on a workpiece where the CSYS (model zero) are "misplaced" If you going to avoid that, make the model zero correct for manufacturing from start. applies for both mill and turn
fräs fas på en pocket (swedish) läs förklaringen nedan, fusion 360
zhlédnutí 98Před 3 lety
Video för mina elever När du skapar fas-cykeln för fasen, kopiera och använd den befintliga fick-cykeln, videon missar lite där (me to fast) Need this in english, comment for that
Thread mill with a internal lathe tool (boring tool), easiest way
zhlédnutí 232Před 4 lety
Made in siemens sinumerik 840d sl (4.07, 4.7) the simulation do not show the tool rotation, just the movement of the tool check the whole instruction on cnccodinguide.blogspot.com/2020/05/thread-milling-inside-or-outside.html
milling in brass in CNC, with a sad audio error
zhlédnutí 259Před 4 lety
Can not fix the original file, the cheap china "gopro" destroyed this fine video, 6 sec delay Milling circular pockets in CNC DMG DMU80T 10 mm Cabide endmill, 3 flutes S=5000rpm, F=1000mm/min
"Impossible" chamfer milling in fusion 360 cam done anyway
zhlédnutí 308Před 4 lety
If you model the edges with chamfers on your work piece, then damn, impossible to use the 2D chamfer in the CAM..... But if... Use 2D contour instead, check the video for it all. I did not invent this at all, NYC CNC-channel have a better video on this
Heidenhain Millplus IT Tilting coordinate system, autodesk fusion 360
zhlédnutí 893Před 4 lety
More on that G7 command and Fusion 360 CAM Tilting in 4 planes. applies sort of for heidenhain cycle 19 (heidenhain 422 cnc controler) I'll post the explanation on my blog with a in-depth explanation on how I think this should be done (the experts doubt) cnccodinguide.blogspot.com/2020/02/heidenhain-millplus-it-and-tilting.html
Heidenhain Millplus, rotating/tilting the coordinate system with G7 using autodesk fusion 360
zhlédnutí 1,4KPřed 4 lety
Heidenhain Millplus, rotating/tilting the coordinate system with G7 using autodesk fusion 360
chuck assembly explode animation in fusion 360
zhlédnutí 158Před 4 lety
chuck assembly explode animation in fusion 360
fusion 360 manufacturing, make your own stock, turning (and milling)
zhlédnutí 212Před 4 lety
fusion 360 manufacturing, make your own stock, turning (and milling)
making a windows app, PWA webapp, fast and easy
zhlédnutí 389Před 4 lety
making a windows app, PWA webapp, fast and easy
Millplus, DMG (deckel maho) DMU80t, G7 example
zhlédnutí 4,2KPřed 5 lety
Millplus, DMG (deckel maho) DMU80t, G7 example
Milling a cylinder head for a VAG AKL engine, head resurfacing.
zhlédnutí 12KPřed 5 lety
Milling a cylinder head for a VAG AKL engine, head resurfacing.
New camera test, turning in a manual lathe
zhlédnutí 39Před 5 lety
New camera test, turning in a manual lathe
mill in lathe, driven tool, siemens sinumerik 840D sl
zhlédnutí 836Před 5 lety
mill in lathe, driven tool, siemens sinumerik 840D sl
"Fuck this shit i'm out"
Hello, good morning, I had a problem with my cnc and I lost the parameters, could you provide me with an image with the parameters? I also have a fanuc 21-T. thank you and sorry for the inconvenience
Hi. unfortunately I've only run the pc version of the control system for the last 10 years, so I have no parameters so give, thank you for asking
Kinda looks like the rapid was set the wrong direction
Can you help me write manual programs? 
i literally just got jumpscared by a lathe
это не сбой, а криворукий оператор. Лодку надо было ставить.
hello please give me your email
can you please do a tutorial of the jaws. assembly. im stuck
I am a layman...please, tell me someone, what's the cost of damaged tools ?
did only hurt the cutting insert, 10-15 euro. If I had damaged the holder, it would have cost around 200 euros. tools are expensive
@@tomasw22 thanks for reply.
I have DMU 40 Monoblock and my problem is, after positioning the head -90 Degrees the has to move a little bit back but it hits the software end stop. Then I receive "B 31". If you try to move the head manually, there is still approx. 100 mm way you can go. But software stops it and you cannot continue to process the side of your part. Any idea about the Problem?
think you need to add M57 code to make the B-axis move over -31deg
kann man die Cam-Daten via USB stick in die Steuerung hochladen?
Ich glaube nicht, dass das funktioniert. Ich habe versucht, den USB zum Laufen zu bringen, aber ohne Erfolg. Es kann auf Millplus-Steuerung mit Doppelprozessor (mit Windows2000 in der Maschine) arbeiten (google translate)
@@tomasw22 danke für deine Antwort. Hast du zufällig die Postprozessor für Fusion 360?
@@MaxMustermann-zv8kq Hier haben wir Glück, es ist bereits in Fusion 360 enthalten. Es heißt Heidenhain Mill Plus in der Post Library
Sounds like you could bump up your feedrate a little for better tool life. But I’m sure if you keep at it you will only improve! Good work!
true, was a bit to slow on the feedrate, tnx
Обычный токарный станок. Резец специально врезают, пока заготовку не вырвало.
개쥿댐;;
Har du möjlighet att dela din postprocessor till mill plus ? :)
hej, den finns ju med i fusion 360 som standard, kolla under heidenhain i post library
@@tomasw22 ah okej hade inte kollat än. Funderar på att köpa en maskin med mill plus. Vad skulle du säga är nackdelen jämfört mot itnc 530? Har inte hittat någon som har något positivt att säga om mill plus än men de verkar ju fungera för dig 😄
@@Tony-iz6tf vad jag lärt mig av en expert, är att mill plus IT är ett överlägset styrsystem, men nästan exakt lika som samma generation av "heidenhain 422"-system (hårdvaran) som är itnc530 tekniskt sett, samma funktioner, men lite olika program-kod för dessa funktioner. som jag förstått det är mill plus lite smartare, men jag kan inte bekräfta det, men itnc530 vs mill plus IT: lika bra, eller: ingen vinnare
glömde, köp mill plus om maskinen verkar ok
hi from where bought that head ?
This machine coun´t handle the overwhleming feed and the fantastic speed of this insert
the student going for 5% feed override and bad programming ends it
En ma mit profis arbeiten
Hey mate. How do you like the mill plus control? I am looking at a dmu 80 with that control. But I dont have any experience with that control. Only Siemens control
Programming pure ISO, cycles are picture choice cycles, just like Siemens 840D with a slight difference, a little different basic thinking and handling, but I do not think it is more difficult than the siemens 840D sl which I also use. But it has become an odd system, a little difficult to find skilled educators. Check www.tomasw.com/millplus/ for a closer look on millplus v530. It is based on the same hardware as HEIDENHAIN iTNC 530
Bro i jumped
why do ppl use a chisel made for plane-turning to do the sideways turning??? someone pls explain ?
no, this is a CNMG -insert, made for external turning, the best choice actually
@@tomasw22 CNMG is good until you discover CCMT ;)
Hello, where can i download the software??
there is only one way, I've got it, tinyurl.com/d7mxbunm , be sure to use an old operative system, like WinXP.
ПРОШУ СКИНУТЬ МНЕ ФАЙЛ ПРОЕКТА НА ALTVOREC@GMAIL.COM
Я буду искать это (google translate)
I GO...
Державка криво выставленна, площадь зажима заготовки в кулачках крайне мала , отсюда и вырвало заготовку. И походу это универсальный станок без ЧПУ.
земля тебе бетоном
пиздец ты диванный эксперт))) Если бы ты работал, ты бы такую хуйню не сказал))
Нихуя себе "сбой"
But the insert still looks good
sandvik coromant, win ;)
There is no insert. It’s the shim.
@@bveeralreddy good eye :)
The insert broke💀
ага, сбой, конеееечно, ты не причём)
Это все программист, я видел он ручку крутил какую-то
Yup. Took me a few watches. As it's traveling toward the chuck, it's cutting a ramp towards the center of the part, which it then tries, unsuccessfully, to back out straight through. Honestly, when you crash a cnc and only kill your part, you're not doing THAT bad XD
Pressure on the jaws is not enough? Also cutting speed is too slow:(
could be, but is the cnc-code thats wrong in this case, an angle going in, G0 out
also wrong type of tool used. you need a different angle on the tool to cut in there.
@@blackpanter12345678 programming error, should be a straight cut :)
@@tomasw22 ah ok well that happen :)
noob.
OMG
wow
hedanhed control
it got MILLPLUS it control, by heidenhain b.v
чтобы сделать конус нужно было лодочку ставить и отвод по х сначала сделать))
это было чистое программирование ошибок :)
Which post processor do you use?
I use the post processor that comes with fusion 360, millplus, called Millplus/millplus in the post tool (or from the post website at autodesk)
how are you moving the jaws?
Everything is connected in assembly, exactly like the real stuff, so I can just click and move/drag the jaw. you can find the chuck in fusion in cam samples (in data panel)
@@tomasw22 yah, ty. Got it to work. But not when i added chuck after i had the part done.. so had to redo everything
@@stintenalle yeah, chuck first, part insert into...
Whats wrong with him
Didnt sound right from the beginning
No it did'n sound right at all, it was programmed i a to sharp angel for this cutter bit, the max down angle for C-shape bit is 2 deg, this was a lot more that that, an evil programming mistake
Нихуя это не сбой.Косячная программа.
how you make the chuck.
I did not make it myself, you find it in "samples =>cam samples" if you scroll down below your projects/files (the waffle in the upper left corner)
So what happens next
Random man
老师厉害666
Привет. Я использую параметр G7 только L1=1 c отходом в безопасную точку , использую абсолютную позицию G74
мы долго работали без G74, вместо этого использовали T0 M6 (читерство я знаю). в 0:23 в видео, где G7 сбрасывается, я рушаюсь со столом, поэтому я знаю, что это не хорошо. G7 L1 = 1 не учитывает длину инструмента, если я правильно помню? Помните, я новичок в команде G7 :) (У меня G74 Z0 L1 = 1 не работает) > Google переводчик <
@@tomasw22 Коллега, попробуйте G74 Z-1 затем следующим блоком G74X-399 Y299 (это габариты рабочей зоны для DMU70)Это для отвода. Для подхода - наоборот. Должно работать.
Привет . Есть образец 5-ти осевой программы с использованием TCPM ? У меня millplus V330 .Мне не понятно , есть ли в этой версии вообще TCPM
I actually shuttered when that part flew. Yikes
sturdy windows on the machine and a lot of years of experience of how students cope whin the machines makes me survive this, as a lot of times when this happens, this is pure education, the student will never do this again..... (the old guy made the program, can't blame another than me, an ornery guys day as always went by... :)
Man, it's my third time watching this and I know it's coming but I still end up jumping.
Have the picture of the piece's technical drawing? Or if you can tell me the values to draw the piece
X XMTS I don’t got a drawing right now, but I can make you one later today if you want.
@@tomasw22 Thank you, I would need it
@@XMTSX Made a fast one, you'll find it here www.tomasw.com/drawings/pocket.pdf (metric)
@@tomasw22 thank you, helped me a lot
@@XMTSX no probs :)
Can you try with G18 please?
like this cnccodinguide.blogspot.com/2018/09/milling-in-lathe-siemens-sinumerik-840d.html ?
Hey look.. it's another fucking dumbass
what function this workpiece for?
Its just a test piece with no use more that training for me