AZ Baggers
AZ Baggers
  • 43
  • 285 192
Major Upgrades to the CVO
Just upgraded the audio and headlight. Getting ready for the 135 Crate Motor.
#cicada #bajadesigns #harleydavidson #cvoroadglide
zhlédnutí: 119

Video

23 CVO Gets a New Paint Job!
zhlédnutí 404Před měsícem
I had Rolling Art Custom Paint in AZ repaint my bike and add a Yaffe Bagger Nation rear and front fender.
2023+ CVO Amp/Speaker upgrade installation review
zhlédnutí 2,1KPřed 5 měsíci
Wanted to give a review and some video of how and where to install an amplifier and speakers in the 2023 model year Harley Davidson touring models. Thanks to Carlos at NVS Audio for being an innovator! #nvsaudio, #harleydavidson #cvoroadglide #sounddigital
Klockwerks windshield and Audio upgrade for 2023 CVO
zhlédnutí 5KPřed 6 měsíci
I was one of the luck ones that got the clockworks windshields for the 2023 CVO Road Glide and Carlos at NVS Audio hooked me up with an amazing audio upgrade #Klockwerks #nvsaudio
POV Kraus Bars Ride and Reviews of CVO Upgrades
zhlédnutí 1,6KPřed 7 měsíci
Took a POV ride to show the view with Kraus bars and other items installed on my 2023 CVO Road Glide
Wheels and Suspension in Motion on 2023 CVO Road Glide
zhlédnutí 727Před 8 měsíci
Ride along video of the Ohlins suspension and BST Carbon Wheels in motion
2023 CVO Thrashin Supply EZ Shift Inner Arm Install install
zhlédnutí 1KPřed 8 měsíci
Installed the trashing Supply EZ shift inner arm on the 2023 CVO Road Glide.
Fooled into buying Harley CVO Boom 3 by Rockford AGAIN!! #cvoroadglide #boom-audio #hertzaudio
zhlédnutí 350Před 8 měsíci
Wanted to give you my opinion on the Harley audio by Rockford Boom 3 6X9 upgrade for the 2023 CVO's. Better options that are cheaper and better. WARNING!!!! Dont waste your money! Contact Volunteer Audio for options!! volunteeraudio.com
"Calling all Dyna Bro's" Club style 2013 Dyna Street Bob walk around and upgrades
zhlédnutí 482Před 8 měsíci
Wanted to give a walk around of my 2013 Dyna Street Bob and the modifications that I did to turn it into a "Club Style" Dyna
2023 CVO Road Glide Upgrades Walk around
zhlédnutí 8KPřed 8 měsíci
Lots of questions prompted me to do a complete upgrade walk around and some updates on what's next. If you have specific questions please send me a message!
2023 CVO more weight reduction with Braille Battery, #cvoroadglide #harleydavidson #braille
zhlédnutí 309Před 8 měsíci
Shed an additional 10 lbs by replacing the stock battery with Braille Lithium. Braille Battery: shopbraille.com/collections/motorcycle-batteries/products/braille-g30hc-greenlite-lithium-battery-and-6a-charger-combo
2023 CVO Put On A Diet with BST Carbon Wheels and Lydall Brakes #carbon_fiber, #cvoroadglide,
zhlédnutí 1,2KPřed 8 měsíci
Just installed my BST Carbon Wheels and Lyndall Rotors and pads. Lost over 22lbs in weight. Looks amazing and cannot wait to take it out and bed in the pads. Lyndall Brakes: 13x5mm Front: shop.lyndallbrakes.com/products/13-big-brake-floating-rotors?_pos=2&_fid=86ee3dd7f&_ss=c 11.8xx7mm Rear: shop.lyndallbrakes.com/products/b-52-rotor?_pos=1&_fid=ce2d8df3b&_ss=c&variant=40586461741145 BST Wheels...
2023 CVO Corbin Dual Tour and Widowmaker Seats
zhlédnutí 4,9KPřed 10 měsíci
2023 CVO Corbin Dual Tour and Widowmaker Seats
2023 CVO Santoro Fabworx Bag Guards and Baja Design fog lights
zhlédnutí 2,8KPřed 10 měsíci
2023 CVO Santoro Fabworx Bag Guards and Baja Design fog lights
2023 CVO, 2019 RGS, 2013 Dyna The fleet cold starts and comparison.
zhlédnutí 1,2KPřed rokem
2023 CVO, 2019 RGS, 2013 Dyna The fleet cold starts and comparison.
2023 CVO Road Glide NEW THROTTLE and WIRING for MX bar setup
zhlédnutí 3,3KPřed rokem
2023 CVO Road Glide NEW THROTTLE and WIRING for MX bar setup
2023 CVO Road Glide Khrome Werks Outlaw 2-1 exhaust cold start
zhlédnutí 38KPřed rokem
2023 CVO Road Glide Khrome Werks Outlaw 2-1 exhaust cold start
1st upgrade in process for 2023 CVO Road Glide
zhlédnutí 3,1KPřed rokem
1st upgrade in process for 2023 CVO Road Glide
2013 Street Bob Build part 1 cold start.
zhlédnutí 166Před 2 lety
2013 Street Bob Build part 1 cold start.
NEW Project!!!! 2013 Street Bob
zhlédnutí 80Před 2 lety
NEW Project!!!! 2013 Street Bob
2019 Road Glide Special Fueling 592 cold start
zhlédnutí 36KPřed 2 lety
2019 Road Glide Special Fueling 592 cold start
2019 Road Glide Performance Bagger Build Arial
zhlédnutí 460Před 2 lety
2019 Road Glide Performance Bagger Build Arial
Performance Bagger Circle DJI footage
zhlédnutí 182Před 2 lety
Performance Bagger Circle DJI footage
Performance Road Glide Tortilla Flat Arizona July 4th Ride
zhlédnutí 221Před 3 lety
Performance Road Glide Tortilla Flat Arizona July 4th Ride
Tore Down the Entire Bike to Clean Up the Wiring
zhlédnutí 170Před 3 lety
Tore Down the Entire Bike to Clean Up the Wiring
Quick Ride to Demo Dakota Digital and Rebuffini Shifter
zhlédnutí 451Před 3 lety
Quick Ride to Demo Dakota Digital and Rebuffini Shifter
Performance Bagger Update Memorial Day Rebuffini Accessories
zhlédnutí 498Před 3 lety
Performance Bagger Update Memorial Day Rebuffini Accessories
2019 RoadGlide Performance Bagger Paint in the Sun
zhlédnutí 4,2KPřed 3 lety
2019 RoadGlide Performance Bagger Paint in the Sun
2019 RoadGlide Performance Bagger
zhlédnutí 17KPřed 3 lety
2019 RoadGlide Performance Bagger
Performance Bagger #3
zhlédnutí 2,7KPřed 3 lety
Performance Bagger #3

Komentáře

  • @Sir_Mack
    @Sir_Mack Před 7 dny

    I think i just threw up in my mouth. I mean wow that looks absolutely horrendous!

    • @AZBaggers
      @AZBaggers Před 7 dny

      You know what they say about opinions.

  • @seeda3473
    @seeda3473 Před 12 dny

    Why both seats? You get the widow first and decide you want some more passenger seat?

    • @AZBaggers
      @AZBaggers Před 11 dny

      @@seeda3473 one I use when riding 2up and the other when I’m solo without the tour pak

  • @TheScreenhouse
    @TheScreenhouse Před měsícem

    So if you had to choose between the 2 Corbin seats you have and you rode solo which model Corbin would you choose for long rides.

  • @prowheel6823
    @prowheel6823 Před měsícem

    👍

  • @ericmilton6265
    @ericmilton6265 Před měsícem

    How long do you think it will take? I am off work on Sundays and Mondays.

    • @AZBaggers
      @AZBaggers Před měsícem

      3-4 hours. Need to take the tank off and run all the wires, might be quicker since I've already taken mine apart several times. You can call or text me 7034857000. Sunday works best for me.

    • @ericmilton6265
      @ericmilton6265 Před měsícem

      OK, thank you once I get home. I will send you a picture of everything that I have.

  • @ericmilton6265
    @ericmilton6265 Před měsícem

    Yes, I have the whole install kit. I purchased the Harley rear speaker lids grills and gaskets. I even ordered a the same battery you got it will be here Wednesday, but I have everything to do the install from Carlos.

    • @AZBaggers
      @AZBaggers Před měsícem

      @@ericmilton6265 okay. You might need to drill into the bags for the speaker wires. I can help, I live in Mesa not sure if that’s close for you. When did you want to do it.

    • @AZBaggers
      @AZBaggers Před měsícem

      @@ericmilton6265 what speakers did you get for the rears.

    • @ericmilton6265
      @ericmilton6265 Před měsícem

      I got the Hertz neo SPL 6 x 9 for the rear Cicada CH for the front. I have the same amp that you have.

    • @AZBaggers
      @AZBaggers Před měsícem

      @@ericmilton6265 Okay should be easy enough. When did you want to install it?

  • @ericmilton6265
    @ericmilton6265 Před měsícem

    Super nice paint job by the way I’m doing the same plug and play from NVS Audio,. Is there anyway that you could help me install mine? I could pay you as well as help you with the install let me know.

    • @AZBaggers
      @AZBaggers Před měsícem

      DO you have rear lid speakers too or just the fairing?

    • @ericmilton6265
      @ericmilton6265 Před měsícem

      Yes, I have the rear speaker lids. I purchased them from Harley color matched with the grills and my kit from Carlos came today.

    • @AZBaggers
      @AZBaggers Před měsícem

      Did he send you rear speakers? If so which ones? What front speakers as well. just need to know if there is any modification or spacers needed.

    • @ericmilton6265
      @ericmilton6265 Před měsícem

      Front speakers Cicada CH 6.5 and the rear speakers are Hertz Neil 6 x 9

  • @ericmilton6265
    @ericmilton6265 Před měsícem

    Hello, could you help me install that on my 24 road Glide?

  • @ericmilton6265
    @ericmilton6265 Před měsícem

    My name is eric I bought the same system you have I have a 24 road glide. Could you help me install mine? I will pay you live in Buckeye Arizona.

  • @ericmilton6265
    @ericmilton6265 Před měsícem

    My name is eric I live in Arizona in Buckeye. I just purchased the same kit you did could you help me install mine? I would pay you. Let me know. Thank you.

  • @snakeoil2182
    @snakeoil2182 Před měsícem

    Looks like a Space Ship

  • @erickwauthion5634
    @erickwauthion5634 Před měsícem

    Great Job! I just bought the same BD lights to install my CVO 23 RG as well.. they look terrific! Question: Did you have any error codes when installing the lights? Any specials recommendations for the installation would be greatly appreciated!

    • @AZBaggers
      @AZBaggers Před měsícem

      @@erickwauthion5634 so I have mine run directly to the battery on its own switch. I’m not sure if the integrated fog light provision will work with Baja design lights. I’m hopeful to find an integrated solution though.

    • @erickwauthion5634
      @erickwauthion5634 Před měsícem

      @@AZBaggers hey there, thanks for replying. Yes, indeed that’s a nice solution, more practical than what I did. I actually installed them yesterday and I can confirm they work fine with the oem harness on the bike. I bought the Harley oem fog harness and did some cutting and splicing on the cables to match the terminals. Programmed them via de computer on the screen. If you leave the option on they will automatically turn on when ignition is switched. You can always turn them back on and off via the screen….

    • @AZBaggers
      @AZBaggers Před měsícem

      @@erickwauthion5634 So you were able to get the Baja design lights to work with the factory harness without anything else and control them on the dash?

    • @erickwauthion5634
      @erickwauthion5634 Před měsícem

      @@AZBaggers yes!

  • @brucejoseph3418
    @brucejoseph3418 Před měsícem

    Nice paint job but I wouldn’t touch that new headlight, there’s nothing out that comes close to looking as good. That ba ha look on the new bikes is horrible

  • @2009bagger1
    @2009bagger1 Před měsícem

    awsome looks great

  • @kellybgliding
    @kellybgliding Před měsícem

    That boi looks 🔥🔥🔥🔥💪🏾💪🏾

  • @zavlo72
    @zavlo72 Před měsícem

    Awesome. get a coil cover. most HD make will fit

    • @AZBaggers
      @AZBaggers Před měsícem

      @@zavlo72 I haven’t found one I like yet. Thanks

  • @robertbozek1008
    @robertbozek1008 Před měsícem

    Damn that looks bad ass!

  • @robertbozek1008
    @robertbozek1008 Před měsícem

    Did you have to use the shims on the ODI or Thrashin bars?

    • @AZBaggers
      @AZBaggers Před měsícem

      The ODI are 1 1/8 and thrashing is 1" so I already had the Kraus 1'1/8 clamp so I needed the shims

    • @robertbozek1008
      @robertbozek1008 Před měsícem

      Oh so Thrashin clamp and bars are 1”?

    • @AZBaggers
      @AZBaggers Před měsícem

      @@robertbozek1008 Correct, Kraus makes 1" versions too

  • @robertbozek1008
    @robertbozek1008 Před měsícem

    Which bars are you using with the 10” kraus riser, mid bend or low?

    • @AZBaggers
      @AZBaggers Před měsícem

      I just swapped out the ODI for Thrashing mid bend bars.

    • @robertbozek1008
      @robertbozek1008 Před měsícem

      That’s what I was planning on using. Kraus 10” risers with the Thrashin mid bend. How do you like the setup now compared to the odi. Also, I was really concerned about blocking the screen but it looks like you have a full view and it doesn’t block it at all. Love the new CVO and agree with the windshield, it’s awful. My 10” Freedom Shield arrives today and can’t wait to try it out.

    • @AZBaggers
      @AZBaggers Před měsícem

      @@robertbozek1008 SO its very similar, I did have to get the shims to reduce it from 1 1/8 to 1" but same feel and I didnt have to modify them. Thats a huge bonus.

  • @RedDevilinCali
    @RedDevilinCali Před měsícem

    It looks like you took off you heal shifter, I did the same thing, I don't like them. I noticed you slid out your toe shifter to the edge of the shaft and added some type of spacer, which I am very interested in. Is the spacer something you can order from someone? Thank you!!

    • @AZBaggers
      @AZBaggers Před měsícem

      Here you go:www.revzilla.com/motorcycle/kuryakyn-precision-heel-shift-eliminator-for-harley-touring-1984-2018?Google&PLA-VTwin%20Parts-PMAX&gad_source=1&gclid=CjwKCAjwqMO0BhA8EiwAFTLgIE1snaBQ_MrUK4VVAxD2WyZxK_0KynYEjF61yb7IG2CUCu-PcRUaCRoCDucQAvD_BwE

    • @RedDevilinCali
      @RedDevilinCali Před měsícem

      @@AZBaggers awesome, thank you!!

  • @RedDevilinCali
    @RedDevilinCali Před měsícem

    Thanks for the video. I have the 23 CVO also, awesome bike. you stated that the widow maker seat sets you back and lower, which I am looking for; However, just curious how the widow maker compares to the touring seat for long trips? Also, how does the touring seat compare to the stock CVO seat; as I don't want to sit higher, I feel to high and to forward on the stock seat currently. Have been contemplating the saddlemen roadsofa, but don't want to sit higher. Also, do you like the corbin comfort more then the saddlemen seats? Lots of questions, sorry. thanks again for videos!!

    • @AZBaggers
      @AZBaggers Před měsícem

      So, the stock seat sucks. I like the widow maker, it is for sure more comfortable even on long rides. I love saddlemen too. I just ordered a step up from them. I had the road sofa on my 19 and it was a great long distance seat. The widow maker is an in between step up and road sofa for comparison sake. I will probably get a road sofa once they figure out the heated function for the new models. Hope that helps. but both will sit you lower and further back from the stock seat.

    • @RedDevilinCali
      @RedDevilinCali Před měsícem

      @@AZBaggers Thanks for information!!

    • @RedDevilinCali
      @RedDevilinCali Před měsícem

      Sorry, another question. You stated you would get the Saddlemen Road Sofa if they figure out the heated function. Do you like the Road Sofa more than Corbin dual touring seat, if so why? since you have had the Corbin Widowmaker, dual touring, and Saddlemen Roadsofa before....if you had to live with just one, what would it be? I don't care about the heated function. Sorry, again for the questions, but the dealerships in my area never have seats to try hardly and they are a big investment. Thanks again and I ordered the toe heal eliminator.....thanks so much for that information.

    • @AZBaggers
      @AZBaggers Před měsícem

      So great question. It depends on how much riding you do 2up. if you ride with someone a lot I would buy the road sofa. If I were riding solo it would be the step up. I like the Corbin, they are more expensive and comfortable. With that said, Saddlemen would be the seat I would choose depending on your riding, solo or 2up.

  • @avtandilrurua2194
    @avtandilrurua2194 Před 2 měsíci

    Thank you for the information you share with us, it is very useful for me, since I now have a cvo street glide 2023. from Russia with love

  • @aaronsimon46
    @aaronsimon46 Před 2 měsíci

    Why?

  • @BigObikes
    @BigObikes Před 2 měsíci

    What side covers are those advan black cvo ?

  • @vbadbee9123
    @vbadbee9123 Před 3 měsíci

    How's that dual corbin after 7 months. How does it position the hips compared to a saddle man?

    • @AZBaggers
      @AZBaggers Před 3 měsíci

      It’s a little wider but really comfortable. No hip discomfort at all. I have no regrets. The heat option was worth it for sure.

  • @mlawson2452
    @mlawson2452 Před 3 měsíci

    Whats the name of that seat?

  • @hendrodwichristian1738
    @hendrodwichristian1738 Před 3 měsíci

    How tall are You? Can You still see the screen? Thanks buddy. Just need infos

    • @AZBaggers
      @AZBaggers Před 3 měsíci

      I am 6'0 and have full view of the screen. I could go 12 inch risers and still see perfect.

  • @jefferyfields1937
    @jefferyfields1937 Před 3 měsíci

    At the time of your video did you have a tuners on your bike

  • @quentinwormicksr.7031
    @quentinwormicksr.7031 Před 3 měsíci

    I also like that chopped trunk with the luggage rack

  • @quentinwormicksr.7031
    @quentinwormicksr.7031 Před 3 měsíci

    The bike sounds Great

  • @TXCVORider
    @TXCVORider Před 4 měsíci

    What did you do to it? Is that stock?

    • @AZBaggers
      @AZBaggers Před 4 měsíci

      That was from my 2019 road glide and everything was done to it as far as engine work

    • @TXCVORider
      @TXCVORider Před 4 měsíci

      Nice! I should have read the description before posting. I’m looking forward to see what you do to the ‘23 CVO so that I can (shamelessly) copy you

    • @AZBaggers
      @AZBaggers Před 4 měsíci

      @@TXCVORider love it. I have it getting painted right now by rolling art custom here in az. So it’s gonna be a few weeks. But I’ve got some new stuff on the shelf.

    • @TXCVORider
      @TXCVORider Před 4 měsíci

      @@AZBaggers nice! I’m waiting for HD to come out with their Stage 2 kit so that I can upgrade. I went with the Corbin seat after your recommendation and couldn’t be happier!

    • @AZBaggers
      @AZBaggers Před 4 měsíci

      @@TXCVORider hopefully they figure out how to tune these VVT motors. So I’m gonna wait for motor work until that’s solid. But I’m right there with you on wanting stage 2. I know fueling is working on it as well as fuelmoto

  • @luisestrella2082
    @luisestrella2082 Před 4 měsíci

    Do you get any "Hisses" or "pops" or any noise when radio is either off or when bike is starting? - Heard that by adding the 2nd amp adn DSP so close to stock amp creates "dirty noise" Thanks

    • @AZBaggers
      @AZBaggers Před 4 měsíci

      I have never noticed what you're describing. It works flawlessly

    • @luisestrella2082
      @luisestrella2082 Před 4 měsíci

      @@AZBaggers thanks.. something mentioned by guy at Volunteer Audio.

  • @ronyclassen-re2jv
    @ronyclassen-re2jv Před 4 měsíci

    I spoke with cicada in Daytona they said they couldn’t install it on mine because of some thing and the software what did you do?

    • @AZBaggers
      @AZBaggers Před 4 měsíci

      Yeah most shops don’t have the harness yet. You need to call Carlos at NVS audio. He will get you what you need. Cicada is a manufacturer and hasn’t come out with any products specific to the new bikes yet.

  • @prowheel6823
    @prowheel6823 Před 4 měsíci

    Bad ass

  • @gregschwermer7348
    @gregschwermer7348 Před 4 měsíci

    How do you find the Corbin seat that you have?They don't have it with the diamond stitching that You have, unless you go with 2022 Road glide but not sure it will fit?

    • @AZBaggers
      @AZBaggers Před 4 měsíci

      It’s the widow maker seat. And I called them to order it with the material that I wanted.

  • @gm-accounts2486
    @gm-accounts2486 Před 5 měsíci

    What mounts are you using for the fog lights?

    • @AZBaggers
      @AZBaggers Před 5 měsíci

      I am using custom dynamics light mounts and some iron angled washers to make them straight because of the angle of the crash bar. they were pointed at the front tire because of the angle.

    • @bbond919
      @bbond919 Před 4 měsíci

      @@AZBaggers 30 degree on the angle washer?

    • @AZBaggers
      @AZBaggers Před 4 měsíci

      @@bbond919 they were 1x1 inch I beam washers. I used 2. Might be close to 30deg.

  • @b.honest3729
    @b.honest3729 Před 5 měsíci

    How tall are you and what about at night?

    • @AZBaggers
      @AZBaggers Před 5 měsíci

      6'0 and no impediment riding night or day

  • @Firemedic1985
    @Firemedic1985 Před 5 měsíci

    Has your muffler shown any signs of bluing? Im thinking of switching to the outlaw setup. Did you dyno yours with the se tune or do the map tune?

    • @AZBaggers
      @AZBaggers Před 5 měsíci

      No Bluing. There was no sense putting it on the dyno, you cant adjust anything with the SE tuner. That is all that is available currently

    • @Firemedic1985
      @Firemedic1985 Před 5 měsíci

      @@AZBaggers makes sense. Thanks for the info.

  • @jayonez137
    @jayonez137 Před 5 měsíci

    Kraus makes some really nice shit. I just bought their rear axle for my SG.

  • @Superchargerspeed
    @Superchargerspeed Před 5 měsíci

    Love the bike, just took delivery today of my 2023 cvo. I put the stage3 Rockford back speakers in it. Gonna see how it is over the weekend but after hearing yours I’m leaning to go your route! How hard was the install? Great video. Thank you!

    • @AZBaggers
      @AZBaggers Před 5 měsíci

      the hardest part was removing the tank. Carlos makes it pretty plug and play. You do need to trim the tray a bit. I did it with a Dremel took about 10 min.

    • @urbanpipingltd.7139
      @urbanpipingltd.7139 Před 5 měsíci

      Great info, was going to ask about the install too!

  • @tz1592
    @tz1592 Před 5 měsíci

    Holy cow, I didn't know you could do as much as you've done. Your bike looks great and sounds like it's performing well. I have a 24 CVO RG in legendary orange, so far I've added the chopped tour pak and my Saddlemen seat should be shipping soon. You've definitely given me some idea's for sure. Thanks!

  • @marcmo7138
    @marcmo7138 Před 5 měsíci

    I would think you would have put the Hertz mid bass neo's in the tour pack speaker pods.

    • @AZBaggers
      @AZBaggers Před 5 měsíci

      I did put the hertz 6.5" neo in the tour pak

    • @marcmo7138
      @marcmo7138 Před 5 měsíci

      @@AZBaggers Looked like the coax neo.

    • @AZBaggers
      @AZBaggers Před 5 měsíci

      @@marcmo7138 I guess I didn’t understand the differences. They are SX 165 Neo’s. Would the other ones be different

    • @marcmo7138
      @marcmo7138 Před 5 měsíci

      @@AZBaggers The SV165 is a mid bass. Would have been perfect in those ported pods. I would think your system would be quite bright with the cicada horns and Hertz coaxial. Supposed the dsp helps a bit though.

    • @NVSAUDIO
      @NVSAUDIO Před 5 měsíci

      @@marcmo7138 The SX 165 and the SV 165 Neos both produce the same exact amount of midbass in the tour pack. We offer both and have both in stock but I like having a tweeter in the back and yes you’re correct with the DSP we can smooth out the tweeter response . You have to remember it’s the port in the tour pack that create the base not the speaker itself so whether the speaker has a tweeter or not the porch and give you the same low, frequency output

  • @bartii8311
    @bartii8311 Před 5 měsíci

    I'm interested in your oem Rockford speakers? Are they for sale? And how much?

    • @AZBaggers
      @AZBaggers Před 5 měsíci

      I only have the stage 3 6X9's left and I want $300

    • @bartii8311
      @bartii8311 Před 5 měsíci

      ⁠includes grills or just the speakers?

    • @AZBaggers
      @AZBaggers Před 5 měsíci

      They dont come with grills. Those are still on my bike. @@bartii8311

    • @bartii8311
      @bartii8311 Před 5 měsíci

      And just out of curiosity why would you go down from Rockford Fosgate to Hertz? Quality and support on Rockford is much better also I know Rockford has high electrical resistance because they are 2ohm which means that 2ohm Rockford speakers are louder than 4ohm Hertz ones. Although louder, 2 ohm speakes are also more likely to produce a poorer quality of sound due to its' power consumption. Was that your reason you switched ? I'm just curious. At least I would go with Cicada Audio

    • @AZBaggers
      @AZBaggers Před 5 měsíci

      @@bartii8311 I don’t know much about the engineering. I’m eventually going to replace the hertz with a more mid bass driver. Other than that no particular reason. I try different options until I get a perfect sound for me.

  • @Kickin_it_671
    @Kickin_it_671 Před 5 měsíci

    What Size riser did you run? Also what finagling did you have to do?

    • @AZBaggers
      @AZBaggers Před 5 měsíci

      they are 10"pullback risers and they were the easiest bars I have ever installed. I did enlarge the hole in the bars to accommodate for the new housing but thats it.

    • @Kickin_it_671
      @Kickin_it_671 Před 5 měsíci

      @@AZBaggers thanks your bike looks great. Since there is not much on the newer RG and SG you've been super helpful. Another question I have, are you running a tuner, I don't remember you saying in any of your videos (I would assume it would be a SE Pro Street)?

    • @AZBaggers
      @AZBaggers Před 5 měsíci

      Yeah, it's the SE tuner. It's the only thing that has come available. It's not ideal but better than stock if your doing stage 1 stuff. @@Kickin_it_671

  • @Smoke0716
    @Smoke0716 Před 5 měsíci

    Great Job Carlos at NVS is the GOAT his craftsmanship the knowledge he gives to the DIY guys is amazing nice bike an setup

  • @mpflippo1023
    @mpflippo1023 Před 5 měsíci

    Hey, I live in AZ. You interested in selling the OEM wheels? I have a 24 Road Glide and prefer the CVO wheels. Let me know

    • @AZBaggers
      @AZBaggers Před 5 měsíci

      Ironically I have them for sale. They are on Craigslist and offer up. But yes I’m wanting to sell them

    • @AZBaggers
      @AZBaggers Před 5 měsíci

      I have them on offer up for 1900. They are complete wheels, tires, TPMS, rotors. Let me know if you’re interested

    • @mpflippo1023
      @mpflippo1023 Před 5 měsíci

      @@AZBaggers I can't find the links to your post...On either Craigslist or Offer Up...Can you send me the link?

    • @AZBaggers
      @AZBaggers Před 5 měsíci

      Sorry about that, Here you go. offerup.co/pxugfQnW2Hb@@mpflippo1023

    • @AZBaggers
      @AZBaggers Před 5 měsíci

      Did the link work? if not just let me know Ill send you my email address.

  • @alcohtraz
    @alcohtraz Před 5 měsíci

    You do know that going from amp to amp is hack work, don't you? Every 12v audiophile knows this. You're creating a load on the factory amplifer which can back feed into that oem head screen, thus frying it, not to mention frying the oem Rockford amplifier. I hope you have great business insurance. You'll need it for when this customer experiences what I mentioned. Best of luck.

    • @ericperry72
      @ericperry72 Před 5 měsíci

      Man this comment is not gonna age well 😂

    • @familyfirstmotorsports9974
      @familyfirstmotorsports9974 Před 5 měsíci

      So how are people putting subs in their cars with factory amplified radio’s? Ive done multiple Infiniti’s with Bose amps feeding the bass amps and I have NEVER blown out a factory head unit or amp…

    • @angelvip2474
      @angelvip2474 Před 5 měsíci

      😂😂😂. Literally every newer vehicle you go from amp to DSP nowadays😅😅

    • @angelvip2474
      @angelvip2474 Před 5 měsíci

      Every 12v audiophile. 🤦🏽‍♂️

    • @alsaint7944
      @alsaint7944 Před 5 měsíci

      You do know he tested this for weeks to test everything right and you do know you are wrong as well right? Every audiophile knows this. 😅

  • @roberthaven8094
    @roberthaven8094 Před 5 měsíci

    Good to go. Thank you for the info and the prompt reply. I appreciate it.

  • @roberthaven8094
    @roberthaven8094 Před 5 měsíci

    Thank you, sir I’m only a little taller (6’3”)…. Do you think it would keep the air off my helmet and flowing over my head as well?

    • @AZBaggers
      @AZBaggers Před 5 měsíci

      I know it's a huge difference from the stock windshield. Klock hasn't professed that they are making anything taller. they are making a sport version but its shorter. I would say it would work great. I have zero buffeting, My wife told me she dissent have her head moving and she would be sitting 4-5 inches above me on 2up riding. I would go for it.

  • @roberthaven8094
    @roberthaven8094 Před 5 měsíci

    Good evening Sir, How tall are you? Thank you, Robert