Video

The timer is telling you to make sure the wiring is connected correctly for an installed rain sensor. If you have no rain sensor installed, open the panel and locate the sensor switch (top right) and move selector to bypass. Hope that helped you out. Don’t forget to Subscribe to our channel for more great tips and advice.👍

Glad to help, be sure to Subscribe to my channel for more great info and advice.✌️

I don’t speak your language, but I think you’re asking where would you find the battery, correct?

Turn the dial to water days and use the “minus” button to remove days and the “plus” button to add days you want to keep. Hope that helps

@@garyssprinklerrepair Thank you so much indeed I was having doubts and there is a $5000 usd charge for over watering so I wanted to get it right and with your help it worked! Cheers

With the timer in run mode, push the bottom left button “semi-auto” it will now run the program selected on top left. Hope that answered your question. Take a minute to Subscribe to our channel for more great tips.✌️

Don’t forget to Subscribe to my Channel for more great tips and content.😁

Glad you were able to use the video to help out. Hope you remembered to Subscribe to my Channel we have a lot more content and tips there.😁

The colors on the timer will usually dictate the (colored wires color) normally the common is a white color. One wire from a valve goes to the white and the other wire goes to a colored wire. Let me know if you still need help. Don’t forget to Subscribe to my Channel for more great content.😁

Always great to hear the video helped. Hope you remembered to Subscribe to my Channel for more tips and help.✌️

There is no polarity for the solenoid wires, either one can go to the colored wire. As a rule I always use the left wire to go to common and the right wire to go to the colored wire. Just a habit, but it doesn’t matter. Hope that helps, don’t forget to Subscribe to our Channel it really helps us grow.

@@garyssprinklerrepair You got it! Thanks for the quick reply. Time to go cleanup the mess of wires and start fresh.

@@lylehutz 😁

@@garyssprinklerrepair So much better. Disconnecting all the excess wires and starting from scratch made that way less intimidating. Now to fix the leak coming from my new valve install and the 3/4 in coupling I had screwed in.

Turn the water off, go by another valve. Home Depot and Lowes sell “Lawn Genie” it’s the same valve as Irritrol. Take the top off the new valve remove the spring and diaphragm, swap them with the old parts. Put the top back on, slowly turn the water back on. Hope that helps, be sure to Subscribe to our Channel for more great tips.

@@720johnspe you might try unplugging it for a few minutes, then try again. Btw why are you trying to reset it?

Yes, on the newer one you’re right. On the older version it clearly stated each zone needs to have a start time that follows the start time and added run time that came before it. So as to not overlap. Guess more than a few struggled with the concept hence the updated version.

@@garyssprinklerrepair oh I see must have gotten the new one

Thank you, don’t forget to Subscribe to my Channel for more great content.👍

@@rawrtravisrawr if you remove the top of the valve. (Water off obviously) Then remove the diaphragm, you will notice the plastic yellow or white pieces are missing. Replace the diaphragm, reassemble, turn the water back on. Should be problem solved. Let me know if you need more help, and don’t forget to Subscribe to our Channel it helps us out too.✌️

@@garyssprinklerrepair thank you! tried taking it off and putting back on with no luck but just ordered a new piece so i'll get that replaced :) thank you! hopefully thats the fix haha

@@garyssprinklerrepair hey so just replaced the diaphram and the solenoid and still no luck on that sprinkler head :\ any other ideas or should i just replace the entire valve?

@@rawrtravisrawr typically we always replace the valve. The quick fix is to save time and usually does the trick for most homeowners fixes. Is your valve a Rainbird? Have you fixed or had someone else fix a broken lawn pvc pipe on that lawn?

@@garyssprinklerrepair yes its a rainbird :) but we had a sprinkler guy come out maybe about a year ago, not sure what exactly he did but ran us $200 so trying to fix it myself instead of another pricey visit, this valve in question does look newer then the others (new pvc fittings/glue and much cleaner then the other 2 near it) i wasn't home for it but the bill said he found and fixed a broken pipe in the area, unsure if it was part of this one i believe it stopped working recently as i just barely noticed the section of grass dieing in the past few weeks could it be another broken pipe underneath? i hear no water movement through the valve when i turn on the valve versus the other ones

Not sure if I completely understand the question. If the valve wire colors are let’s say (left to right) red, orange, blue thy might be blue, red, orange on the timer. You could always change them on the timer to be red, orange, blue then you know they correspond to the order of the valves. Hope that helped

@@panchovilla7235 don’t worry my son and his friend thought they were geniuses when they were little. So, they were going to take a genius test online to prove it. I looked at them and said, spell genius? They said, hold on let me look that up. I told them they can skip the genius test. 😂 Sprinkler

@@garyssprinklerrepair Thank you!

Thank you Paul, hope you Subscribed to our Channel to get all the new content.

More than welcome Roger, don’t forget to Subscribe to our Channel for more great content.✌️

Time for a new timer

Ya not so intimidating, once you see how easy it is, right? Hey, don’t forget to Subscribe it really helps us too.

Always happy to hear the videos still helping. Hope you remembered to take a minute to Subscribe to our Channel.👍

@@ajshah2748 You’re welcome, don’t forget to take a minute to Subscribe to our Channel✌️

Unplug the timer and plug a drill or blow dryer (ohm meter) into the outlet. That way you’ll know if you have actual power there. The battery will create a display but doesn’t have the power to run the zones. Hope that helps, be sure to take a minute to Subscribe to our Channel for more info.

Would you like to ask a question?

You’re very welcome, thank you for taking the time to leave a message. Don’t forget to take a minute to Subscribe to our Channel. It will bookmark us for the future.😁

One at a time….hope that helped. Don’t forget to Subscribe for more great tips.✌️

Always a pleasure to help out. Be sure to Subscribe to our Channel for more great content.👊

Double check you’ve programmed a run time for zone 3 in the correct program. If that doesn’t work it’s either a wire issue or solenoid issue. Let me know if you need more help, don’t forget to Subscribe and tap notifications so you’ll know I answered you.

@garyssprinklerrepair I think it might have been a solenoid issue. I messed with the wires a bit and it started working. Thank you!

@@bbqjones cool, double check all the wire nuts are tight. Irritrol valves had an issue a few years ago with the wires shorting at the top of the solenoids. (Lawn Genie) homeowner version made by the same Co.

Glad it helped you get the zones back, hope you remember to Subscribe to our Channel it really helps us grow.😁

@@allenhumphrey6970 turn the dial to start time, next push the right arrow it should show 2-A with no start time…add your desired start time using the up arrow and push enter. Return the dial to Auto…..done. Don’t forget to Subscribe to our Channel it helps us a lot.👍

Very possible, this is a pretty old timer. Are you remembering to turn the dial back to auto/ run position after doing the manual program?

@@garyssprinklerrepair yes

Possibly time for a newer controller. Try the Hunter x-2 I’m sure you’ll like it. Be sure to subscribe to our Channel. Btw I have a video of the X-2 there, if you want to take a look 1st.

😁 You’re safe, it’s here to stay.👍

I suggest you install an extension for your browser that allows you to download CZcams video. This one is among my bookmarks and, just in case, downloaded into my hard drive. This video is gold.

You’re welcome Lynn, hope you remembered to Subscribe to our Channel. It helps us grow.

Yes it does, when it’s finished with the A program it will check to see if you’ve programmed anything in B program. Hope that helped, be sure to Subscribe to our Channel it really helps us grow.👊

You have a bad valve, hope that helps

Awesome, don’t forget to Subscribe to our channel for more great content.👍

Glad to be of assistance, hope you took a minute to Subscribe to my Channel. I have a lot of other content. Happy Fathers Day

No