Video

I’ll load up a non beta version tomorrow and check but I think now you can finally. Will report back

So bad news, no is the short answer. You can't at the moment save directly to an external SSD through Capture One while tethering, only to device. It is something we asked about early on but no update yet is that will happen, I'll ask my contact to see whats up. I know Cascable allow setting or external storage to save to so it is possible. Best workaround in Capture One Mobile is to export originals after a session to an external SSD & you don't need to disconnect your camera, just select the images you want and export originals>Export & then pick save to files. There you will see any attached storage options. This works with a USBc hub. I guess you can then delete that images on your ipad to free up space as you need? I'd not be happy deleting anything before a solid backup is don't though so... Ideally running the session to an external SSD would be great both for storage space and portability between location and studio for editing but thats in the future (hopefully).

What does the bracketing do?

Thought I mentioned a counter weight in the outside leg but perhaps not. That’s lots of extra helpful advice there, the more the better. The speed of transfer is good to the iPad Pro, almost instant from the GFX100s using my tether tools cable. The cameras usb port is 3.1 speed so much slower that the thunderbolt speed the iPad allows but still more than fast enough. And with live view you can trigger the shutter as well as change settings in the camera from the iPad. Nice. See the next video for that live view in action.

Yea you can record with that app, for 4k your capture card will need to output 4k. That little one I was using there says 4k on it but it only outputs 1080. Have fun.

It a nice update, been asking about that since day one.

I’m using a 5k monitor and an iPad for live view. Should be able to see the feed close to full screen though the resolution will be low as C1 explained. I’ll have a look to see if I can find an issue and report back.

Hey, tried to see what your issue is and can't replicate it, it's all working as expected. Full screen live view

Through XAcquire it’s about the same though in use, for editing, CaptureOne One is faster

@@kimfarrelly Interesting. Most of my editing is done in Photoshop. I've always admired Phocus so I may have to give this a try ! Thanks !

You Sony guys are spoilt for choice 😅, try Imaging Edge as that has hot folder support IIRC.

Hahahaha. Nice. Enjoy the ownership.

Hi Guy, thanks for the nice comment. I was happily surprised to find Phocus working well, the good news is it will allow editing of Fuji rafs (Raw), but there is one thing to change on your camera, you need to shoot uncompressed raw. I’ll have another look at seeing if the settings can follow the next image, but there are so few settings it might not.

@@kimfarrelly Hi, I do shoot Uncompressed RAW. (Super Fine + RAW) but the only pictures loading in Phocus are the Jpegs

@@guybauwens9642 see if the raws are in your hot folder as X acquire. There is settings in XAcquire for jpeg/raw transfer.

@@kimfarrelly Hi again, Kim. Didn't have the time to test your proposition.... until now. BOTH the RAF and JGEG files are transfered to the destination folder specified in X-acquire. Phocus still only shows the JPEG, even using v3.8 (installed earlier today) and using the specified format for the files. So, no help. for me.. anyone experiencing the same? Also tested : settings in Phocus are not applied on the "next picture". That MIGHT be caused by me applying the settings to the JPEG (in Phocus) as I don't have the RAF's (raw files) at my disposal. regards, Guy

@@guybauwens9642 OK, good that the rafs are in your X acquire folder. That’s working as it should, do you want to zip and mail me a random raf? I’d be interested in seeing what’s going on. I don’t have any 50mp raw files here to test. My first go to on that issue is the compressed file not being able to be uncompressed by Phocus. Setting the file to uncompressed in the menu as opposed to the other two options is compressed or lossless..

Other cables also available, plus you probably got one with your camera. Speaking of cameras, I suppose your camera, lens and other stuff like a computer costs money too, so no not free. You can also use X Acquire over WiFi if you need to, it it is a lot slower to transfer the raw files but it works and no need to spend on a cable.

Bruh, you can use any compatible cable 😂

Thanks Tom, it’s even better with my 4k card but that’s a bit big in reality. Use it much more for viewing the camera that I though. new video tomorrow too if you use CO mobile as hinted in the vid.

A white hood adds €4k to the lens, ask any 200mm owner.

Lmao.

You’d be best using a colour checker to adjust and also see what your camera is outputting over its HDMI as it might be colouring the feed. On the new version you can load up luts

Thanks for the advice. I finally just found where I can make adjustments in the monitor. This helps a ton. Thanks you. 😊

Yea that was my second one and still have it.

You can set it in camera or in Capture One. If in capture one you can then set the edit from one image to automatically apply to the next on import.

The bit I’m screwing in is the 1/4 20 mount, it’s a separate part to the monitor, included in the box, and one of the few things I disliked as it feels like a weak point although still not broken

I’ve to get clarity from C1 yet about that but as far as I know they are saying activations will no longer work meaning if you ever get un activated…! But should still be able to use express. I’ve already started researching alternatives for free tethering solutions and will do another video about my findings.

Great. I'm sure a lot of people will be keen to see the new video! @@kimfarrelly

@@koinegreekbible Spoke with C1 today, and no Express will stop working Jan 30th. Pitty, so that limits options for now. I'm researching alternatives but cant get away from the need to have a solid editor as the primary reason to use and app.

Kim, thank you for persevering with this. That is very bad news. I hope that you find an alternative. Fujifilm can't be happy with this and will presumably want to find an alternative themselves.@@kimfarrelly

Thanks for the comment and for watching the short frontstandard1488, if that is your real name. The YT algorithm thanks you.

In Capture One, the top menu click on 'Camera' then 'Enable Hot Folder' & select the folder you want Capture One to 'watch'. This has to be the same folder you set in X-Acuire before hand. Connect your camera to your Mac and take a shot. X-Acuire will grab the image file and putit in the hot folder. Capture one is watching that folder and will display the image. You should see a new sub folder being created in the Library tool tab in Capture One ( it will be the folder icon on the left see 3:45 in the video). Let me know if you need any more help on this.

Fujifilm not fully supported for AF in CO. When clicking the shutter button in Capture One (CMD+K) without live view the camera should focus on the AF point as set in the camera, can;t change that point in CO. For live view you can adjust the focus with the arrows Near/Far in the Camera Focus tab and shoot from within the live view screen. I tend to use 2 'screens' on my mac and swipe between them as needed for focus of viewing.

Hej, thanks for the sub 📸. The cable for your X-T4 is usb-c to whatever is on your computer. The X-T4 is USB-C. You can also get an adaptor to turn USB-C to USB-A (the ‘normal’ usb size). I have some of these adaptor cables that work well, there are also much smaller adaptors out there, make sure they are usb 3.1 (5Gb) speed. Adaptor: geni.us/Nimasusbc2a

Nope, only on the more flagship models. Pity Fuji did that.

oh no. that's too bad! do you know if xt30 can connect to any monitors? @@kimfarrelly

@@fathiebusyra5798 Yes it's can output to monitors via it's HDMI output. Here's one I've used that works great & recently updated with better features: geni.us/FeelworldFW568

Yes the new V3 now supports luts, link in the pinned comment

Yes, and even better on the X-T5 or X-H2

@@kimfarrelly nice, I have xh2, and 150-600mm price dropped 400 dollars, thanks for your response

Yes Capture One have an Express version for Sony too. www.captureone.com/en/capture-one-express/sony

@@kimfarrelly yeah I just noticed it doesn't have tethering in the express version of the app but not sure if there's a work around like you have for fuji

@@zahkilovett No Sony cameras here, but they probably have a similar app to transfer images in real time to a computer ?

Glad you liked it and many thanks for the kind comment. 📸📸

The 150-600 is a nice lens for sure, for both photos and video. I had to give the loaner 150-600 Fuji gave me back & still haven't bought one - yet.

To record or live stream video into your computer you’ll need a capture card like the one I talk about in this video: czcams.com/video/esB8YfCAlBo/video.html A good free bit of software for video is called OBS

very helpful thanks for answering my question@@kimfarrelly i already own an "ELCATO" usb card that should also do the job, I haven't tried it yet, its in my other place.... Anyways I'll figure it out thanks so much again !!

Sure you can use it for photography, you'd have a much bigger screen then on the camera. I've used it a bit for doing top down images, so I can easily see the composition when the camera is in an awkward place.

That's great thanks for reply, yea not all cameras have an angle type of display. Pretty much that's an upgrade later on... but to at least have somewhat of the same feature without compromising how one twist their bodies for photos or recording is a win. Awesome video dude!