Video

Thank you bro!!!!

Thanks for your video it gives confidence needed to know you can do a good job of rear brakes.

Thanks

Great video, cabin filter replaced and this piece fell apart. God bless youtube and your video. 👍🙂

Gr8 video. Have you used it on any other vehicles paint. Any black vehicles etc. What is your opinion. Tkz!

Hello my friend. I got my ALH (skoda octavia 2002) 10000 km ago and the old owner put 15w40, I put 10w40 and I noticed 8000 km after light smoke coming out of oil dipstick and filling hole. I think 10w40 is too light for the car that's why it smokes! I noticed also some oil on the crankcase breather ends and EGR valve! Engine is runnig very good no problems at all! Please support and advice. what is your oil change interval?

Hello my friend. I got my ALH (skoda octavia 2002) 10000 km ago and the old owner put 15w40, I put 10w40 and I noticed 8000 km after light smoke coming out of oil dipstick and filling hole. I think 10w40 is too light for the car that's why it smokes! I noticed also some oil on the crankcase breather ends and EGR valve! Engine is runnig very good no problems at all! Please support and advice. what is your oil change interval?

Hello my friend. Mine broke too and I discovered it by total luck. Btw which oil do you put on your ALH engine? I got mine (skoda octavia 2002) 10000 km ago and the old owner put 15w40, I put 10w40 and I noticed 8000 km after light smoke coming out of oil dipstick and filling hole. I think 10w40 is too light for the car that's why it smokes! I noticed also some oil on the crankcase breather ends and EGR valve! Engine is runnig very good no problems at all! Please support and advice.

One thing to be cautious about is after removing the bladé assembly from the arm is to be careful not to accidentally hit the arm as it will slam unto the windshield and with the spring loaded force there is no telling what damage that could do the windshield. Just saying

Why is your car so dirty? You should see my car…!

thanks man my painter left a streak of paint on the antenna base and I want to clean it up without crapping up the new paintjob

Dude thank you: fob-uless

Make sure you use this link that's also in the description: www.auxito.com/?ref=YeFdlmbe Use my channel name to receive a discount: CORYSDIYAUTO

hi corey thanks for your video I have a leak but I am not sure if its the head seal or the head plug that is leaking but the diesel fuel leaks onto a bold just to the right of where the thermostat is. I hope its not the head seal its a job and a half.

What about the filter, wonder...

Thank you!!

Hey Corey, great video. Is there enough room to get under without the ramps?

Thanks for the video's Cory. Just picked up my 2024 3LT Blazer and didn't see much under the hood that looked the same as my 2012 Sierra.

Well done.. I've seen videos on here where they make a video but they don't really know how to do it correctly. Like not priming the filter, or making the job way more complicated then it needs to be.. torque wrenches, break cleaner to wipe stuff off rather then a simple rag wipe, or adding oil, starting it, pressure's up.. then shut it off, add oil, then have to restart even though it won't change the level, and they certainly wouldn't leave the hood open even moving 5' back and forth. Their so careful with everything I can't take it!! :) your video is like how I would do it... BTW nice 928S or S4 There

Does it have to be a Mercedes wiper blade? I’m having trouble doing it the the Michelin blades

Awesome thank you!

Thank you!!! Your style and paced video is perfect!

Great video, help me with my 2016! Shop wanted to charge me 4.5 hours labour for this!

Torque specs Tighten the 4 fuel injection bolts to 20 Nm (15 lb ft) Tighten the 4 fuel injection fuel feed pipe nuts to 25 Nm (18 lb ft) Tighten the 4 fuel injection fuel feed pipe nuts to fuel rail to 19 Nm (14 lb ft).

thanks

thanks

Excellent.. thanks

Thank you for including the socket sizes , going to change my wife’s oil and I like to have the tools I need at hand

Well done, but I think pinning the cable out rather than bending it is a better solution

Did you drain some coolant from the radiator before doing this? I see in other videos they drain the radiator underneath and then start working, some drain coolant from EGR cooler and oil cooler.

Hey did you have to buy the warning cancelling capacitors that the website offers for the lights ?

Do you recommend any other brands (besides AC DELCO) with easy installation?

Excellent close up to the tricky bits, good lighting good focus, others I found were lacking, this was perfect.

Thank you for this video. It was very helpful.

Nice video. Having a hard time finding any replacement blades that fit that are not OEM.

Thanks

Wait your supposed to have a hold down for the spair?? Mines just sitting in there

Obviously I'm no automotive engineer but why on gods green earth do you need that many wires going to a headlight switch? 😅

You consistently have some of the best videos on this model golf. Thank you for taking the time to make these. They are very useful!

Hey man,where i can get the USA style lights from your front bumper, i really want it ,i m from europe,can you give me some keywords how exatcly is called? Thank you

I replaced mine and added ultra black gasket maker around it and it’s still leaking, I don’t get it. Only thing I could think of was the thermostat housing where the egr valve sits, but there would be coolant in the leak. I’m stumped

Thanks, this is the most comprehensive removal video I have seen. That said, I replaced one of these before, and now, after many years I can't for the life of me figure out how I did it with no video. I just know it was a bitc#... to do. I read one site which said that 2001 didn't have factory auto door locks, and that they were aftermarket. Uhhh, no, my 2001 Civic EX 2 dr came loaded with factory power door locks (purchased new in June of 2001). Thank you, have the door apart, but for the life of me couldn't figure out how to remove the darn thing, this will help! Your efforts in documenting this are appreciated! (be careful about breaking the plastic tabs holding the rods in, already broke one in being so careful, they are brittle. Now in the middle of a job I have to order a new one!) 😁

how many litres of coolant did you refill after the job? cause I saw a big spill there.

Great video. Super straight forward.

Great Stuff. I have a leak as you described and a gasket kit on the way. This video has given me the confidence to proceed! Excellent job.

you dont need to flush the entire coolant for this fix right?

My radiator fan just keeps going even when the car is off and not hot . Untill the battery dies. I have to unplug the fan while the battery is connected so it turns off . Is this caused by a faulty FCM? I feel like this just started after my coolant overflowed on it

Install?

Nice!

Hi! Thanks for the great and detailed instructions! I am up to this project on weekend. i had no change to obtain the safety bolt showed in your video (I only have the seal). I know a great disaster may follow if the head becomes completely off the pump. Would it be possible for you to measure the bolt so that I could utilise a bolt with same specs from a local shop? I really really would appreciate this and be grateful ever after.