Video

Now look at the extra weird inner perimeters that this generates if you set the slicer preview anywhere in the range where you applied this modifier. It's not just surface level. It goes as deep as the modifier object.

Only thing that worked for me was getting an older smaller USB drive, nothing over 32mb would work

Thanks! Gonna try this as soon as i get out of prison!

6 sides is a hexagon not an octogon

Hint: Using the phrase "it's that easy," then the phrase "never be clueless again" is a little insulting. For example, releasing a video detailing the most basic function in Fusion 360 proves how clueless you are. Not nice, is it?

Excellant video!

Thank you for walking this through. I'm a wanna be and there's so much to learn

That's called stippling and is 100% not fuzzy

Looks like that’s exactly 90°. Be careful out there friend. Remember, 91° is no longer vertical :)

Interesting. Thank you for posting Just getting into knowing what I 'need to know' in printing magnets

I'm surprised you didn't use the Measure Distance tool to get some base measurements from the imported stl.

thanks! i did not know about the "$preview" global!

Wonderful video about my favorite CAD program! There is one feature that I NEVER see anyone talking about or using in tutorial videos, and it would be VERY useful for these videos, and for every user in general. This might be the MOST useful feature of this wonderful program. Put your cursor just to the right of any digit, press and hold ALT and then press up arrow to increase that digit or down arrow to decrease. Previews will update instantly, and it makes fine adjustment SOOOO simple. If you need more precision, ALT-right will add decimal places to the number, and you will then adjust THAT digit up or down instead. ALT-left works just the way you'd think it would. This would make doing those adjustments you had to do to match up the edges MUCH easier and faster. Try it, you'll soon come to depend on it!

Don’t want a drain hole how can I fix that

Use wide tape to press down on top the bb’s to get them off the top

The fluke is only more accurate if you have the emissivity set correctly for what you are trying to measure and the same is probably true of the generic, so I can't conclude anything much based on your video for failing to do this, except to conclude that out of the box, the fluke seems more accurate at translucent cold things. ;)

They get "beat up a little bit"? What on earth are you doing with them? The main thing is will they survive battery changes, and will the ones with the printing on the rubber buttons, have that printing wear off. I don't beat my equipment up per se, but I admit that i may not always wash my hands and/or wear soft gloves, so eventually printed-on rubber buttons do have their markings wear off which is really, REALLY annoying because it didn't have to happen, would have been so simple for them to mold that into the plastic next to the button too or just just use hard plastic buttons with that molded in (not still printed on, or else there was no point).

This was very helpful, my printer is working great again. Thank you! :)

What if you want xyz to be different like? X 50% Y 45 % Z 48%

I. Did. Not. Know. This. I feel so smart now. THANKS!!!!!

Gatac has some awesome designs, I absolutely love the almost marble like panels on the suyulen

Very interesting thanks!

This is great. I don't know what it is. Will probably never use it. But it's great! ❤

I've no idea what this program is, but I like your closing line.

Oooh, what's that fig?

While this doesn't really apply here, did you know that you can set a lower preview resolution than when you render? $fn = $preview ? 6 : 128; linear_extrude(4){ circle(d=10); } Also, with the nightly builds they added measure distance and measure angle. This is under Design on the menu and the scene has to be rendered.

hello, iqless!

Awesome work man ive been looking for a good place to learn more about openscad and i finally found your channel. Cant wait to see what you work on next.

Neat!

If you have an old FW (like 4.3.4) you can't directly upgrade to FW 6.0.0. You need to first upgrade to FW 4.4.1, then to FW 6.0.0.

I havent done any maintainence on my Prusa Mk2 since 2018 and it prints beautifully every day. I tell a lie, I greased the linear bearings last week. Thats it though.

This Prusa company plays dirty. It's interesting to hear about what setting problems your account had. I bought a new board because my mk3 printer quit printing after about 10 pieces. The new board introduced a new set of problems. I'm fed up with prusa.

That was easy. Thanks so much its a great help...

Also parts are not forever, long time clicking repaired by changing original spring that couldnt hold filament tight enought anymore.

Wish I could locate an actual Peruvian Elongated Skull stl file… Not one of the Fake ones or a “Board Binding” Victim, but one based on /Rendered from Actual Back room, Elongated Skulls..

Learned a lot with this video. Thank you.

What is the length of the idler screw

laser thermos are a sham. fluctuates all the time. can't get steady accurate readings because it's hitting different air particles on top of hitting surface particles with gloss deviations at different regions all the time. even the fluke branded ones made in the states are useless. also, how do you know the fluke is the more accurate one? maybe the chinese one is more accurate since you didn't test with a full contact third party thermometer

The PTFE tube is directional. The ends are slightly tapered

I appreciate your work, but your measurements are not really accurate. You have to adjust the emissivity settings when measuring shiny surfaces like a stainless steel pot. And even then it is pretty much hit or miss.

What's your resolution settings for the 0.2 nozzle and what resolution settings can you recommend for a 0.4 nozzle

Could you upload the bigger one in pieces by chance? I could try it, but good chance I will mess things up lol. Great work btw!!

Great informative video. My daughter picked up a couple of sample bottles this weekend at SMRRF in Oxford. I couldn't see any directions so I wanted to check how to apply it. Now I know that it works and how to apply it. In fact the only downside is that I no longer need to make a video while seeing if it works 😂. I would have like to have seen the test twisted but imagine it would still hold. Top job fella

Your absolute min. layer heights for a 0.25mm nozzle should be 0.06mm. You should not cross a certain ratio between nozzle size e.g. 0.4mm or 0.25mm and layer height. The smaller the nozzle the smaller layer you can print and vise versa. You also get stringing because you remelt the previous layer, lower your temps, increase cooling, increase travel speed, turn off z-hop, increase retraction, turn on wipe while retract and tune it. Those should help with stringing a lot.

Should have called this video how to try and fix your Prusa, fail and waste everyone’s time. Thanks for wasting my time.

How do you get this fucking thing to fucking work

Thanks for sharing!

I don't know why when I set just_display to false my model dissapear from the view...

I got an issue, the brass fittings on the extruder and tube are stuck together. Is there a way to split them apart? i.imgur.com/YMkweb3.png

Wow.. This is good.. As a software programmer, i have always felt bored spending hours making a single model in blender and other mouse based CAD software...models not easily reused, moving the mouse, shortcuts, hidden menus...... OpenScad is like my way out