- 37
- 258 513
American Key Supply
Registrace 17. 01. 2017
Support videos for the AutoProPAD, PS80, and PS90 immobilizer programming machines by XTool
Decoding and duplicating a Sargent key on the Black Widow key machine
Decoding and duplicating a Sargent key on the Black Widow key machine
zhlédnutí: 590
Video
Corbin System 70 on the Black Widow Key Machine
zhlédnutí 294Před 2 lety
Quickly decoding and then duplicating the Corbin Russwin System 70 key on the Black Widow Key Machine
Cutting the Honda Stainless Steel Key with the Black Widow Key Machine
zhlédnutí 4,4KPřed 2 lety
Honda released a new key type recently for the 2021 Accord, Civic, and MDX models. I'm sure they had hoped their machines would be the only ones able to cut it, but the Triton PLUS and Black Widow key machines cut these no problem, at no extra cost!
Decoding and Cutting Schlage Key on the Black Widow Key Machine
zhlédnutí 903Před 2 lety
Decoding a Schlage SC1 key, then cutting a new key at the top speed (10). It takes about 20-25 seconds to cut and works smoothly in the lock.
Cutting VW/Audi HU162T Keys Using the Black Widow Key Machine
zhlédnutí 606Před 2 lety
Demonstration of the Black Widow Key Machine decoding and then cutting the HU162T key blank, commonly used on newer VW and Audi vehicles.
Cutting Best/Falcon SFIC Keys Using the Black Widow Key Machine
zhlédnutí 490Před 2 lety
Demonstration of the Black Widow Key Machine decoding and then cutting the small format IC core keys. This key type is notorious for being difficult to cut unless you are using a very accurate key machine.
Cutting Tubular Keys Using the Black Widow Key Machine
zhlédnutí 477Před 2 lety
Demonstration of the Black Widow Key Machine decoding and then cutting the tubular (Ace) key blank, commonly used on Harley Davidson motorcycles and various vending machines.
Black Widow Key Machine V2 - Calibration of the S1 Jaw
zhlédnutí 686Před 2 lety
Follow along with this video to correctly calibrate your S1 jaw for double-sided keys. NOTE: If your serial number begins with EW2110 or lower, you have a V1 machine. If your serial number begins with EW2111 or higher, you have a V2 machine.
Black Widow Key Machine V1 - Calibration of the S1 Jaw
zhlédnutí 364Před 2 lety
Follow along with this video to correctly calibrate your S1 jaw for double-sided keys. NOTE: If your serial number begins with EW2110 or lower, you have a V1 machine. If your serial number begins with EW2111 or higher, you have a V2 machine.
Cutting Ford/Jaguar HU101 Keys Using the Black Widow Key Machine
zhlédnutí 422Před 2 lety
Demonstration of the Black Widow Key Machine decoding and then cutting the Ford HU101 key blank.
Cutting Toyota 80K-Series Keys Using the Black Widow Key Machine
zhlédnutí 772Před 2 lety
Demonstration of the Black Widow Key Machine decoding and then cutting the Toyota/Lexus 80K-series key blank.
Black Widow Key Machine - Calibration of the S2 Jaw
zhlédnutí 511Před 2 lety
Follow along with this video to correctly calibrate your S2 jaw for single-sided keys
Announcing the Black Widow Key Machine
zhlédnutí 6KPřed 2 lety
Promotional video demonstrating the new Black Widow Key Machine
Black Widow Key Machine - Calibration of the S1 Jaw
zhlédnutí 499Před 2 lety
Follow along with this video to correctly calibrate your S1 jaw for double-sided keys
New Product! The Automotive Locksmith Gadget Bag
zhlédnutí 3,3KPřed 3 lety
New Product! The Automotive Locksmith Gadget Bag
AutoNotePAD Magnetic Lock Decoding Chart & Dry Erase Marker
zhlédnutí 1KPřed 3 lety
AutoNotePAD Magnetic Lock Decoding Chart & Dry Erase Marker
AutoProPAD Prox 2015 Toyota Prius Remote
zhlédnutí 283Před 4 lety
AutoProPAD Prox 2015 Toyota Prius Remote
Programming an Xhorse Super Remote to a 2009 Nissan Sentra
zhlédnutí 16KPřed 4 lety
Programming an Xhorse Super Remote to a 2009 Nissan Sentra
Programming an Xhorse Universal Smart Key to a 2015 Nissan Altima HD
zhlédnutí 21KPřed 4 lety
Programming an Xhorse Universal Smart Key to a 2015 Nissan Altima HD
Can an Xhorse superchip rewrite a chip that would usually lock?
zhlédnutí 3,9KPřed 4 lety
Can an Xhorse superchip rewrite a chip that would usually lock?
Installing AutoProAPP onto AutoProPADs
zhlédnutí 2,2KPřed 6 lety
Installing AutoProAPP onto AutoProPADs
Demo of the New XHorse Condor XC-009 Key Duplicator
zhlédnutí 20KPřed 6 lety
Demo of the New XHorse Condor XC-009 Key Duplicator
Automotive Remote Head Key Roll-Pin Press: Replacing Broken Tips
zhlédnutí 1,5KPřed 6 lety
Automotive Remote Head Key Roll-Pin Press: Replacing Broken Tips
Cutting B102 Keys with the XHorse Condor XC Mini
zhlédnutí 20KPřed 6 lety
Cutting B102 Keys with the XHorse Condor XC Mini
Programming a 2012 Audi Q5 (All Keys Lost) via OBD using VVDI2
zhlédnutí 56KPřed 6 lety
Programming a 2012 Audi Q5 (All Keys Lost) via OBD using VVDI2
Reset Immobilizer for a 2015 Toyota 4-Runner (G Key) with AutoProPAD
zhlédnutí 8KPřed 7 lety
Reset Immobilizer for a 2015 Toyota 4-Runner (G Key) with AutoProPAD
Adding a Key to a 2015 Toyota 4-Runner (G Key) with AutoProPAD
zhlédnutí 2,7KPřed 7 lety
Adding a Key to a 2015 Toyota 4-Runner (G Key) with AutoProPAD
Keypad Combination Read for a 2008 Ford Expedition with AutoProPAD
zhlédnutí 697Před 7 lety
Keypad Combination Read for a 2008 Ford Expedition with AutoProPAD
Hi, do you need a special cutter that can cut those stainless keys?
Audi and software Ford. How
Hi can fvdi do Audi A1 2014 add key
Yeah but how do you get to this program in the computer? Where is the link?
Quanto custa essa máquina ?
The condor mini plus 2 will also cut them with the included m5 jaw. Just did one few weeks back
Does it cut by code for home keys?
Y'all need better visibility - took me forever to figure out who made this; I saw it in an educational video on automotive locksmithing
Where can I get the key code for the emergency key???
Hi can i buy this machine to Ghana West Africa
Can i buy this machine to Ghana West Africa
I love silent movies.
I have to wonder what SNAP-ON of all people are charging for key machine jaws! I bet it's a good deal.
oh it's right there in the video. $864. Yep.
Ida just cut it on the hpc but ...
Do you have the speed turned up ?
There was ONE time after an update , can't remember which , and it worked .. never worked again tho
I would like to see the same thing done on the Triton machine
Great video, thanks for sharing!
Would’ve been nice to hear the machine cut
Don't worry, it sounded completely normal. The aftermarket key we were cutting was not actually steel. The OEM steel keys are very expensive and hard to get our hands on right now, actually. But Chris Lira DID cut a steel key with the standard cutter before and it all went smoothly.
@@americankeysupply2929 What will be the benefit to moving to stainless steel keys? Or is this a novelty?
@@dinohudson1432 I'm pretty sure Honda used steel simply as a way to try and stop non-dealerships from being able to cut it. BUT THEY CAN'T STOP US!!!
@@americankeysupply2929 I see…thanks for the heads up. Will soon be reading articles w/ peoples frustration and maybe Broken equipment
Why the machine takes 3 times to cut the key?
A lot of the key types offer an option of passes. I'll ask them to add it to Kwikset and Schlage since it seems to cut so easily.
Great machine for this type of jobs I recently went to key an entire apartment complex and had to cut new masters submasters and change keys because the originals were worned out. This machine and the cigarette power cord saved me a long trip back to the shop. The sc4 and sc1 keys I made with it worked perfectly fine 👍
When I cut b102 it has me put on 4th line. Does that mean issue is resolved? Because I am trying to cut a gen 1 Cadillac cts 2006 that uses b102 but the xhorse machine doesn't show gen 1 cts. So I have to pick b106 key manually. The key is working not sure if I have wrong code or if it's this issue.
I have a problem that i cant program a toyota rav4 2016 made in canada. The remote
Bro blow your nose before making a video
I've been trying to cut a hu101 key on the xhorse mini plus2 and it fails to decode key it goes between the cuts looking for the cuts, so I adjusted the wear on tip until I was able to get it to read the key properly. But when I cut the key it comes out in a more square shape and not a smooth bitting shape and it doesn't work I tried 6 times with different keys and still can't get one copy done on the hu101. Any suggestions. Oh even when I use a key code it does not work either. But other keys are all good just the hu101. Thanks for any suggestions.
Was wondering someone would come out with this. I myself just got a setup for my im608. Tired of the plastic box. I keep my lishis in the plastic holders that uhs sells. (Aks might too) but best setup for lishi period.
Wow i love this. Employ a company like Promo-SM!
Nice Demonstration
Aren't you guys gonna open the comments section on Black Widow key cutter videos? It would be helpful to discuss the tips & problems especially I'm already using the machine and encountered a small problem already.
Mo!
Im assuming the GM 6-cut plastic head key is a not-able-to?
Tku!
I would use it to carry the Lishis and other decoders. Notepads and pens, lubricant spray cleaner with some blank keys to clean the lock before decoding.
So what’s the point of having this machine
I've honestly not run into this problem with the Condor Mini yet. I've cut a few B102 keys, the machine calibrates and cuts the key like a gem even with it not being all the way to the line they want it at. If anything, stick to B96 keys or one of the other longer variant keys and you'll be fine. You might need to level the shoulder of the B96P keys to work some ignitions though.
Well don’t take me wrong you guys have the shittiest website never can you guys checked UHS How good their website is
Will the super remote work on Chrysler keys such as RAM or Wrangler where the remote programs with transponder?
Hello for audi A5 is the same procedure?
Explain how to replace battery in this remote.
On the back just pop it open where the groove is at.
@@Wulfy1978 thank you bro,my work done.
Hello do you shipped here in Philippines?or just in America only
Just use JMA b102 it works like a charm
Yo tengo una máquina de está marca el catálogo está en el idioma mándarino para colombia sería en Español gracias
where can i buy that pin press?
jason thomas did you find where to find the pins
@@remobiliselimited8082 i can't remember but I started using the plier type pin punch
Aww the little guy on the left is sitting on telephone books.
cut it on a b91
Thank you for the video. Good tip on making the template and duplicating it on a key with the key duplicating machine.
What is each side (A, B, C, D) of the clamp for what type of keys?
Was this an all keys lost or did you program with the original key?
No, he has an original key
do you have a video showing the calibration process?
Nice storage solution.
Hy i hate my vvdi key tool max nothing is there