Video

If your changing your oil on time,,,,,,,As in every 5k for petrol engines,And 4K for diesel,,You should never need to use flushes,,The add package and detergents in a good quality full syn,,Are more than good enough to keep your engine clean,,,Another thing that keeping your oil clean and changing it regularly does ,,And you never hear anyone including these so called experts say is,,It keeps all the gaskets and O rings in your engine from degrading and going brittle ,,Which means no engine oil leaks,,,Changing your manual trans with new good quality oil every 60k will keep gaskets and O rings supple and give you smooth gear changes,,

Flushing. You should NOT rev to the red line. Idle the engine for 20 minutes. (With the new, cheap oil). This is fine. Then, Drive it for 2,000 miles. Drain the oil. Amsoil says they don't want additives added. FINALLY, put Mystery Oil in your gas tank. AVOID that other junk product. Mystery Oil is one of the greatest products in the world.

Use what you want as you want that said MMO is a pretty weak solvent. I've used it in several oil changes over the full oil change and I've never really noticed any difference in cleaning under the valve cover from doing so. It just seems pretty mild even over 3k miles (about 1.5 years of driving for me) I can't imagine it would due to much in 10 mins to be fair. Use it how you please by all means, just after 5+ years of regular use along with name brand oil its not made much difference in the varnish on my motor. I like the product, I just don't consider it a strong cleaner.

The issue with RainX is it stains your glasses permanently when the product fade off......Never again for me it's a big no.

Very impressive!

Great video. I wonder if that extra wire goes towards the steering wheel stereo controls possibly? I have a 2006 Rav4 but mine doesn't have stereo controls on the steering.

For your main caps do you have to line bore to run ARP's or because you're running billet caps?

how do u store ur block do u oil ur cylinders?

Hi there.. I also have a honda pilot with misfiring problems usually cylinder 1 or 3.. Been thinking of getting the vcm muzzle but I see 2 kinds online.. The one installed in the video and another that doesn't connect to the pos terminal (comes with 4 different ohms from amazon).. Which one to get? And why it connects to the battery and other one doesn't? Anyone know?.. Pls help

I forgot, what fuel are you running? Smeding just did a cool comparison dyno, C85 looks interesting 🤔

See how I make this generator purr like a kitten: czcams.com/video/VF_fZEu3fFk/video.html

Love the video! What transfer case are you going to use with this AWD setup?

Great vid. I've always wished there was a way to convert modern AWD Nissans like my FX50 to manual, also been daydreaming of swapping a boosted Coyote in there once my VK50 gets tired since there very little aftermarket support for it.

why not just buy the Tile wallet credit card size ..for the apple airtag..i place it inside the wallet...you cant even feel it

Thank you for doing this - as it represents a preliminary process that anyone who buys one of the mini mills will need to get into. Any other processes that you think might be of similar benefit to newbee mini mill owners would be appreciated. Thanks!

To the point, respect

You have got to be kidding

I'm a first responder and have treated patients poisoned by carbon monoxide produced by generators. PLEASE, PLEASE, PLEASE relocate this generator to an open environment, or a shed detached from your residence.

What is that pressure sprayer?

Hi BTech! Do you have an update on your experience with your VCM delete and any additional information you think is relevant?

this is a bad idea

Playlist for this build: czcams.com/play/PL8JXm-4yItlwysUfm1ahKqNVi85-Y73GN.html

Playlist for this build: czcams.com/play/PL8JXm-4yItlwysUfm1ahKqNVi85-Y73GN.html

Playlist for this build: czcams.com/play/PL8JXm-4yItlwysUfm1ahKqNVi85-Y73GN.html

Playlist for this build: czcams.com/play/PL8JXm-4yItlwysUfm1ahKqNVi85-Y73GN.html

Playlist for this build: czcams.com/play/PL8JXm-4yItlwysUfm1ahKqNVi85-Y73GN.html

Playlist for this build: czcams.com/play/PL8JXm-4yItlwysUfm1ahKqNVi85-Y73GN.html

Playlist for troubleshooting P0420/P0430 on my 2011 Honda Pilot: czcams.com/play/PL8JXm-4yItlyodEkcSlBZv-C6vJ1oYQrG.html

Playlist for troubleshooting P0420/P0430 on my 2011 Honda Pilot: czcams.com/play/PL8JXm-4yItlyodEkcSlBZv-C6vJ1oYQrG.html

This video is part of a troubleshooting series I put together for the P0420 code on my Honda Pilot: czcams.com/play/PL8JXm-4yItlyodEkcSlBZv-C6vJ1oYQrG.html

I advise heavily against cleaning your rims with a brush let alone the same brush as the one you use to clean the tires. Using that same brush on the car's paint will almost certainly scratch the paint. If you intend to detail other people's cars be careful which method of agitation you use on each surface. A wash mitt might be better for the rims and body.

This wasn't a diagnosis. It was shooting in the dark and hoping for a fix my man. When the throttle body replacement 'fixed' it for 7 months i would have questioned the same issue when it returned and not the pedal sensor. But hey..

Toyota wasn’t messing around with those intake-hose clamps. T-bolt style clamps are usually reserved for boosted applications.

What’s that T handle wrench you used? That thing is cool

You should release a cook book 😂

Philips screws lol

It is about 6 weeks since I installed these. They still have not warped. Will continue testing.

Engine is looking nice man!

Yes, it's brand new oil.If you're gonna get a flush going you need to buy the right stuff to flush it with marlborough always just really a protector

A young fellow Marvel mystery. It was not designed to work like that. Use it in between oil changes and yes it does. It does lubricate and remove water

Your rotors aren't warping, you're getting uneven pad material built up on the rotor faces. And how do you know there over heated ?

Quaker State Synthetic is excellent. It’s underrated and people think it creates sludge from what the conventional oil did 30 years ago perhaps. My Silverado does better on Quaker state synthetic vs Amsoil Signature and Mobil 1.

Make sure you don't have an exhaust leak after upstream o2 sensor as it can push the downstream sensor lean and throw the cat codes. You can observe this by graphing downstream sensor voltage on a scan tool. That was the problem with mine. You could also try some cataclean.

Good video! Maintenance is key, and we don't know what works or doesn't until we try. Signature Series is a good choice, and you shouldn't have to do any flush the next time.

To be honest it would have been cheaper to use Amsoil engine flush and powerfoam. And I believe you would have gotten your desired result 👍. Thanks for sharing 😊 also you shouldn't really add oil additives to something like signature Series. You can degrade the oil and it isnt needed. The base oil and additive package is already much better than a lower quality oil with an additive

BG EPR would probably work better. Nicely done though.

Everyone has their own opinion. Good to see people taking action to improve the vehicles health. I do like the old school aspect of MMO. Shout out FordBossMe. keep us updated!

I agree- you are harming your engine dude- watch the scientific approach the oil geek does so you can get this crappie idea out of your head.

The Oil Geek would not approve. The new Valvoline oil renew and restore would much better at cleaning the engine and removing deposits then MMO.

nice TMS machine. Maybe try a theta burst?