검은별 공작소 B-Star Crafts
검은별 공작소 B-Star Crafts
  • 214
  • 206 578 019
Creating a Trap Double Lock / Woodworking DIY
#목공 #목공diy #잠금장치
이번 영상은 서랍에 적용시킬 상하 잠금장치입니다. 위쪽 열쇠 구멍의 양쪽에 트랩을 설치하였습니다. 그리고 아래쪽 잠금의 열쇠는 위쪽 잠금 장치에서 구할 수 있습니다. 이 장치는 곧이어 공개될 또다른 잠금 장치의 부속이 될 겁니다. 감사합니다.
Creating a Trap Double Lock
This video shows the top and bottom locking device to be applied to the drawer. Traps were installed on both sides of the upper keyhole. And the key to the lower lock can be obtained from the upper lock. This device will be part of another locking device that will be released soon. Thank you
zhlédnutí: 7 707

Video

Dust removal / Making a 225mm circular sander / Woodworking DIY13:37Dust removal / Making a 225mm circular sander / Woodworking DIY
Dust removal / Making a 225mm circular sander / Woodworking DIY
zhlédnutí 73KPřed 14 dny
#목공 #목공diy Dust removal / Making a 225mm circular sander / Woodworking DIY
A shelf with adjustable length that is simple to make / Woodworking DIY2:19A shelf with adjustable length that is simple to make / Woodworking DIY
A shelf with adjustable length that is simple to make / Woodworking DIY
zhlédnutí 8KPřed 21 dnem
#목공 #목공diy 이번 영상은 두 개의 선반을 연결하여 길이 조절과 꺽임이 가능한 선반을 만들었습니다. A shelf with adjustable length that is simple to make / Woodworking DIY In this video, two shelves are connected to create a shelf that can be adjusted and bent in length.
How to make simple woodworking tools more stylish / Woodworking DIY3:15How to make simple woodworking tools more stylish / Woodworking DIY
How to make simple woodworking tools more stylish / Woodworking DIY
zhlédnutí 36KPřed měsícem
#목공 #목공diy 이번 영상은 페인트 및 오일을 칠할 때 바닥에 묻지 않게 사각뿔을 만들었습니다. 일반적인 사각뿔이 아닌 디자인을 고려하여 만드는 방법입니다. How to make simple woodworking tools more stylish In this video, I made a square pyramid to prevent it from getting on the floor when applying paint and oil. This is a method of making it considering the design rather than a typical square pyramid.
Castle joint table using router and drill press8:07Castle joint table using router and drill press
Castle joint table using router and drill press
zhlédnutí 20KPřed měsícem
#목공 #목공diy 이번 영상은 라우터와 드릴프레스를 사용하여 캐슬조인트 방식의 테이블을 만들었습니다. 라우터에 사용된 비트는 9R 라운드 오버 베어링 비트이고 드릴프레스에 사용된 비트는 18mm 나비 비트입니다. 목재(18T)는 멀바우와 고무 나무입니다. 감사합니다. Castle joint table using router and drill press In this video, I created a castle joint table using a router and drill press. The bit used in the router is a 9R round over bearing bit and the bit used in the drill press is an 18mm flat wood bit. ...
Table leg joint using 9mm and 18mm bits5:02Table leg joint using 9mm and 18mm bits
Table leg joint using 9mm and 18mm bits
zhlédnutí 7KPřed měsícem
#목공diy #목공 이번 영상은 9mm 라운드 오버 비트와 18mm 포스너 비트를 이용하여 테이블 다리를 연결하는 방식입니다. 목재는 고무나무와 멀바우입니다 Table leg joint using 9mm and 18mm bits This video shows how to connect table legs using a 9mm round over bit and an 18mm Posner bit. The wood is Rubber and Merbau.
Two ways to create circles and straight lines using a router / Woodworking DIY5:58Two ways to create circles and straight lines using a router / Woodworking DIY
Two ways to create circles and straight lines using a router / Woodworking DIY
zhlédnutí 92KPřed měsícem
#목공 #목공diy 이번 영상은 템플릿과 지그를 이용하여 동일한 결과물을 만들어내는 과정입니다 Two ways to create circles and straight lines using a router / Woodworking DIY This video is the process of creating the same result using a template and jig
Making a Router Plate / Woodworking DIY4:24Making a Router Plate / Woodworking DIY
Making a Router Plate / Woodworking DIY
zhlédnutí 12KPřed 2 měsíci
#목공 #목공diy 이번 영상은 테이블이나 작업대에 쉽간편하게 거치하고 쉽게 사용할 수 있는 라우터 테이블을 만들었습니다. 목재는 고무나무입니다. 감사합니다 Making a Router Plate / Woodworking DIY In this video, I made a router table that can be easily mounted on a table or workbench and is easy to use. The wood is rubber tree. Thank you
Application of groove digging jig / Woodworking DIY3:35Application of groove digging jig / Woodworking DIY
Application of groove digging jig / Woodworking DIY
zhlédnutí 11KPřed 2 měsíci
#목공 #목공diy 이번 영상은 테이블쏘 홈파기 지그를 이용하여 고리 걸이 등을 만들었습니다. Application of groove digging jig / Woodworking DIY In this video, I made a hook hanger using a table saw grooving jig.
Holder method that does not fall off when relying on each other / Woodworking DIY8:17Holder method that does not fall off when relying on each other / Woodworking DIY
Holder method that does not fall off when relying on each other / Woodworking DIY
zhlédnutí 7KPřed 2 měsíci
#목공 #목공diy 이번 영상은 세 개 이상의 비트가 있어야 균형을 잡을 수 있는 비트 홀더입니다. 영상에 사용된 목재는 고무나무와 멀바우입니다. Holder method that does not fall off when relying on each other / Woodworking DIY This video shows a bit holder that requires three or more bits to be balanced. The wood used in the video is Rubber tree and Merbau.
A peek into the internal structure of a folding cutter while making a walnut body / Woodworking DIY5:13A peek into the internal structure of a folding cutter while making a walnut body / Woodworking DIY
A peek into the internal structure of a folding cutter while making a walnut body / Woodworking DIY
zhlédnutí 8KPřed 3 měsíci
#목공 #목공diy 이번 영상은 2천원짜리 접이식 커터를 리폼하였습니다. 만드는 과정에서 접이식 방식의 구조를 볼 수 있었고 플라스틱 몸통 대신 월넛으로 교체하였습니다. A peek into the internal structure of a folding cutter while making a walnut body / Woodworking DIY In this video, I remodeled a $2 folding cutter. During the manufacturing process, the folding structure was visible, and the plastic body was replaced with walnut.
Simple structure but amazing results / Woodworking DIY4:26Simple structure but amazing results / Woodworking DIY
Simple structure but amazing results / Woodworking DIY
zhlédnutí 18KPřed 3 měsíci
#목공 #목공diy 이번 영상은 앞뒤가 막혀 빼낼 수 없는 홀더를 단순한 구조로 꺼낼 수 있는 방법입니다. Simple structure but amazing results / Woodworking DIY This video shows how to take out a holder that is blocked at the front and back and cannot be removed with a simple structure.
A new mounting method using magnetism and rotation / Woodworking3:54A new mounting method using magnetism and rotation / Woodworking
A new mounting method using magnetism and rotation / Woodworking
zhlédnutí 96KPřed 3 měsíci
#목공 #목공diy 이번 영상은 자력을 이용해 붙이고 회전을 이용해 떼어내는 방식의 거치대입니다. A new mounting method using magnetism and rotation / Woodworking This video shows a holder that attaches using magnetism and removes using rotation.
Create a detachable bit holder / Woodworking DIY4:04Create a detachable bit holder / Woodworking DIY
Create a detachable bit holder / Woodworking DIY
zhlédnutí 9KPřed 3 měsíci
#목공 #목공diy 다양한 크기의 비트들을 한곳에 보관할 수 있는 비트 거치대. 거치 상태에서 비트 홀더만 분리가 가능합니다. 사용한 목재는 멀바우와 고무나무입니다 Create a detachable bit holder / Woodworking DIY A bit holder that can store bits of various sizes in one place. In the mounted state, only the bit holder can be removed. The wood used is merbau and rubber wood
What happens when you apply lasers to woodworking?5:19What happens when you apply lasers to woodworking?
What happens when you apply lasers to woodworking?
zhlédnutí 6KPřed 3 měsíci
#목공 #목공diy #xtoolf1 엑스툴 F1과 어태치먼트를 이용하여 다양한 각인 방법을 목공과 접목하여 영상으로 표현했습니다. What happens when you apply lasers to woodworking? Using Extool F1 and attachments, various engraving methods were combined with woodworking and expressed in a video.
Basic method of easily removing a tool holder / Woodworking DIY4:19Basic method of easily removing a tool holder / Woodworking DIY
Basic method of easily removing a tool holder / Woodworking DIY
zhlédnutí 17KPřed 4 měsíci
Basic method of easily removing a tool holder / Woodworking DIY
Crafting Tips for Safe Sanding / Woodworking DIY5:13Crafting Tips for Safe Sanding / Woodworking DIY
Crafting Tips for Safe Sanding / Woodworking DIY
zhlédnutí 8KPřed 4 měsíci
Crafting Tips for Safe Sanding / Woodworking DIY
How to resolve steps considering design / Router table / Woodworking DIY4:16How to resolve steps considering design / Router table / Woodworking DIY
How to resolve steps considering design / Router table / Woodworking DIY
zhlédnutí 11KPřed 4 měsíci
How to resolve steps considering design / Router table / Woodworking DIY
Tips for using woodworking / Woodworking DIY4:07Tips for using woodworking / Woodworking DIY
Tips for using woodworking / Woodworking DIY
zhlédnutí 10KPřed 4 měsíci
Tips for using woodworking / Woodworking DIY
Unique Spacing Adjustment Idea / Woodworking DIY5:35Unique Spacing Adjustment Idea / Woodworking DIY
Unique Spacing Adjustment Idea / Woodworking DIY
zhlédnutí 15KPřed 5 měsíci
Unique Spacing Adjustment Idea / Woodworking DIY
How to use Non-Perforated Hinges and Making an In-Out Door cabinet5:08How to use Non-Perforated Hinges and Making an In-Out Door cabinet
How to use Non-Perforated Hinges and Making an In-Out Door cabinet
zhlédnutí 15KPřed 5 měsíci
How to use Non-Perforated Hinges and Making an In-Out Door cabinet
The Entire process of Actual use of the Spray gun and Cleaning / Urethane finishing5:18The Entire process of Actual use of the Spray gun and Cleaning / Urethane finishing
The Entire process of Actual use of the Spray gun and Cleaning / Urethane finishing
zhlédnutí 7KPřed 5 měsíci
The Entire process of Actual use of the Spray gun and Cleaning / Urethane finishing
Use of various woodworking jigs / Woodworking DIY4:24Use of various woodworking jigs / Woodworking DIY
Use of various woodworking jigs / Woodworking DIY
zhlédnutí 30KPřed 6 měsíci
Use of various woodworking jigs / Woodworking DIY
Sanding jig for hammer drill considering rotation and safety / Woodworking DIY4:25Sanding jig for hammer drill considering rotation and safety / Woodworking DIY
Sanding jig for hammer drill considering rotation and safety / Woodworking DIY
zhlédnutí 46KPřed 6 měsíci
Sanding jig for hammer drill considering rotation and safety / Woodworking DIY
Create a triple cube that won't fall out / Woodworking4:25Create a triple cube that won't fall out / Woodworking
Create a triple cube that won't fall out / Woodworking
zhlédnutí 216KPřed 6 měsíci
Create a triple cube that won't fall out / Woodworking
The process of creating a new cube within a cube / Woodworking DIY / Milwaukee CBL4:15The process of creating a new cube within a cube / Woodworking DIY / Milwaukee CBL
The process of creating a new cube within a cube / Woodworking DIY / Milwaukee CBL
zhlédnutí 10KPřed 6 měsíci
The process of creating a new cube within a cube / Woodworking DIY / Milwaukee CBL
The process of thickening the table top and filling the gaps / Woodworking DIY5:24The process of thickening the table top and filling the gaps / Woodworking DIY
The process of thickening the table top and filling the gaps / Woodworking DIY
zhlédnutí 185KPřed 6 měsíci
The process of thickening the table top and filling the gaps / Woodworking DIY
Making a sturdy table with one leg / Castle joint / Woodworking DIY5:34Making a sturdy table with one leg / Castle joint / Woodworking DIY
Making a sturdy table with one leg / Castle joint / Woodworking DIY
zhlédnutí 7KPřed 7 měsíci
Making a sturdy table with one leg / Castle joint / Woodworking DIY
Which Screwdriver bit? Why do screws stripped / Woodworking DIY5:04Which Screwdriver bit? Why do screws stripped / Woodworking DIY
Which Screwdriver bit? Why do screws stripped / Woodworking DIY
zhlédnutí 2MPřed 7 měsíci
Which Screwdriver bit? Why do screws stripped / Woodworking DIY
Perfect Castle Joint using Two types of wood / Woodworking DIY5:01Perfect Castle Joint using Two types of wood / Woodworking DIY
Perfect Castle Joint using Two types of wood / Woodworking DIY
zhlédnutí 58KPřed 7 měsíci
Perfect Castle Joint using Two types of wood / Woodworking DIY

Komentáře

  • @user-ui7hu7tc8d
    @user-ui7hu7tc8d Před 15 hodinami

    드라이버 젤 끝을 그라인더로 갈아서 쓰면 좋아요 (뾰족한 부분을 평평하게)

  • @user-ry6kq6uw6t
    @user-ry6kq6uw6t Před dnem

    good

    • @BStarCrafts
      @BStarCrafts Před dnem

      Thank you 😊 Have a nice time 🍀

  • @joaobastistafereira45
    @joaobastistafereira45 Před 2 dny

    Parabéns amigo Brasil

    • @BStarCrafts
      @BStarCrafts Před 2 dny

      Obrigado 😊😊 ☺️Tenha um bom dia 🍀

  • @user-bo5kf3ii7l
    @user-bo5kf3ii7l Před 4 dny

    It's super

    • @BStarCrafts
      @BStarCrafts Před 4 dny

      Thank you 😊 Have a nice time 🍀

  • @user-yi1bk6mf1t
    @user-yi1bk6mf1t Před 5 dny

    직쏘날있는 부분에 구멍을 내는 이유가 있나요? 나의 마키다 직쏘의 경우에는 날이 밀려서 직각이 아니라 사선으로 잘리는데 이것과 연관이 있을까요?

    • @BStarCrafts
      @BStarCrafts Před 2 dny

      구멍을 절반 자른 면하고 직소날하고 일직선이 되서 부재의 닿는 면에 밀착하게 만듭니다. 그러면 부재가 직선으로 잘립니다. ^^

  • @user-ri3ho5we7n
    @user-ri3ho5we7n Před 5 dny

    Желаю дальнейших успехов в творчестве!

    • @BStarCrafts
      @BStarCrafts Před 4 dny

      감사합니다 😊😊 좋은 하루 되세요 🍀

  • @KyhoteDon
    @KyhoteDon Před 5 dny

    Great, good idea

    • @BStarCrafts
      @BStarCrafts Před 4 dny

      ㅇThank you 😊 Have a nice time 🍀

  • @user-lu9ip3do4l
    @user-lu9ip3do4l Před 7 dny

    일진

  • @user-lj5kc8os9s
    @user-lj5kc8os9s Před 7 dny

    나 흉내낼꺼야유

    • @BStarCrafts
      @BStarCrafts Před 5 dny

      넵넵~ 안전 작업하세요 🍀👌👍

  • @user-vf2fc5zi3c
    @user-vf2fc5zi3c Před 7 dny

    자석을 이용한 아이디어가 대단하네요 어디서 이런아이디어가 나오는지.. 다음 영상도 기대해볼께요 ~~~🎉

    • @BStarCrafts
      @BStarCrafts Před 5 dny

      감사합니다 😊😊 좋은 하루 되세요 🍀

  • @juniormagaiwer1655
    @juniormagaiwer1655 Před 7 dny

    Maravilha show 👏👏👏👏

    • @BStarCrafts
      @BStarCrafts Před 7 dny

      🛠️🤜🤛👋👋🍀💚😊

  • @CraigLYoung
    @CraigLYoung Před 7 dny

    Thanks for sharing 👍

    • @BStarCrafts
      @BStarCrafts Před 7 dny

      Thank you 😊 Have a nice time 🍀

  • @vadimchik15
    @vadimchik15 Před 7 dny

    Охренеть у моей пилы Бош все чётко...Наверно нестоит покупать Китайца тока оригинал брать нужно и с надписью-профессиональный инструмент.Последние 10 лет Бош стал делать некачественный инструмент,поэтому предпочитаю Метабу или инструмент тока из США(но с ним проблемы в напряжении сети 120 вольт).Поэтому что Милуоки что Дэволт покупаю тока аккумуляторы.Слава нашим магазинам что ещё торгуют зарядка и и акумуляторными батареями из Китая на 220-230.

  • @anonim920
    @anonim920 Před 8 dny

    Huinya

  • @fokusnikfim
    @fokusnikfim Před 8 dny

    Hello. SUPER 👍🏻👍🏻👍🏻 Thanks.......FIM👮🏻🚂🤚🏻

    • @BStarCrafts
      @BStarCrafts Před 7 dny

      Thank you 😊 Have a nice time 🍀

  • @canche3885
    @canche3885 Před 8 dny

  • @user-nw9rb9yb5n
    @user-nw9rb9yb5n Před 8 dny

    👍👍👍👍👍

  • @fabricemenoud3296
    @fabricemenoud3296 Před 8 dny

    Excellent 👍

    • @BStarCrafts
      @BStarCrafts Před 7 dny

      Thank you 😊 Have a nice time 🍀

  • @BubuMarimba
    @BubuMarimba Před 8 dny

    any metal screw can tap into wood or plastic. Just make a thin incision along it and screw it in - it will tap. This tap will be much stronger than the vinyl+parafffin mix of the glue gun rod.

  • @RBZerone
    @RBZerone Před 9 dny

    Good Job 👍👏

    • @BStarCrafts
      @BStarCrafts Před 8 dny

      Thank you 😊 Have a nice time 🍀

  • @opinion8033
    @opinion8033 Před 9 dny

    Este increíble trabajo es para el ejemplo perfecto de Expectativa vs Realidad

    • @BStarCrafts
      @BStarCrafts Před 8 dny

      Thank you 😊 Have a nice time 🍀

  • @robertobarrozo289
    @robertobarrozo289 Před 10 dny

    Magnífico

    • @BStarCrafts
      @BStarCrafts Před 10 dny

      Thank you 👋😊 Have a nice time 🍀

  • @center137master7
    @center137master7 Před 11 dny

    바닥에 기스나지 말라고 붙이 하얀플라스틱 부품이름 좀 부탁드립니다.

    • @BStarCrafts
      @BStarCrafts Před 10 dny

      ㄱ자 바닥보호대로 검색하면 나올겁니다. 좋은 주말 되세요. 😊

  • @pashaspb9499
    @pashaspb9499 Před 11 dny

    Построй ядерный реактор что бы завинтить шуруп.

  • @PedroDelavega-tt1wl
    @PedroDelavega-tt1wl Před 12 dny

    Jai apris des chose grace a vous. Un grand merci. ❤❤❤

    • @BStarCrafts
      @BStarCrafts Před 12 dny

      Merci. passe une bonne journée 😄🍀

  • @user-nv6hr3kf5e
    @user-nv6hr3kf5e Před 13 dny

    사용하신 비트 이름이 뭔가요 ?

    • @BStarCrafts
      @BStarCrafts Před 13 dny

      아래 영상의 설명란에 다양한 타공 비트 설명이 있습니다. 😊 단면으로 보는 5종류의 드릴 타공 비트 / 목공 DIY czcams.com/video/Z2-p2UsxVWU/video.html

  • @jklee4003
    @jklee4003 Před 13 dny

    은퇴 후 취미로 목공을 하고 있는 개인입니다. 따로 목공을 배운적은 없이 유투브를 보며 독학하고 있는데..혹시 테이블쏘나 기타 목공 기계, 설비, 부품등에 대한 컨텐츠도 한번 준비해주실 수 있을지 문의드립니다..^^; 저 같은 목공에 취미를 가지고 있는 분들에게 큰 도움이 되는 영상제작에 진심으로 감사드립니다.

    • @BStarCrafts
      @BStarCrafts Před 13 dny

      네| 감사합니다. 시간되면 조금씩 올릴께요. 안전이 최고… 안전 목공하세요. 🛠️😊👋

    • @BStarCrafts
      @BStarCrafts Před 13 dny

      이 채널 말고 검은별공작소 short 채널에 보시면 다양한 공구 및 부품 등이 있습니다.

  • @skjeong66
    @skjeong66 Před 14 dny

    이것은 아트다

    • @BStarCrafts
      @BStarCrafts Před 13 dny

      감사합니다 😊😊 좋은 하루 되세요 🍀

  • @user-yg8xb7gd9r
    @user-yg8xb7gd9r Před 14 dny

    Наркомания какая-то... Рекомендую в следующем видео болгаркрй на кухонном ноже нарезать зубья и пилить им "чистовой рез"... Тоже 10 миллионов просмотров наберете. Ютубу же всё равно, он не знает, что автор идиот...

  • @rudolfpeters367
    @rudolfpeters367 Před 15 dny

    Schöne Schleifmaschine ist das geworden. Danke für die Anregung bei den Details - abnehmbarer Tisch, abklappbarer Staubraumabdeckung. Wie immer ein tolles Video. Bei meinen ähnlich gebauten Tellerschleifern nutze ich Motoren aus alten Wäscheschleudern - Gruß aus Deutschland - Rudi

    • @BStarCrafts
      @BStarCrafts Před 15 dny

      👌👌👋👋👋 Danke 🙏🇩🇪😊 Schönen Tag 🍀

  • @user-nw9rb9yb5n
    @user-nw9rb9yb5n Před 15 dny

    👍👍👍👍

    • @BStarCrafts
      @BStarCrafts Před 15 dny

      감사합니다 😊😊 좋은 하루 되세요 🍀

  • @manfred8273
    @manfred8273 Před 15 dny

    👍👍💪💪👏👏👏🙏

    • @BStarCrafts
      @BStarCrafts Před 15 dny

      🤜🤛💚🍀😊👍👍👋👋

  • @trobinou47
    @trobinou47 Před 15 dny

    Excellent video, as usual 👍 at 6:42 you use a drill bit that is very interesting, could you tell me where you bought it? Thanks.

    • @BStarCrafts
      @BStarCrafts Před 15 dny

      It is a countersink drill bit, which is a brand called EZEN KOREA, it is sold on Amazon shop or Aliexpress. Thank you 😊 Have a nice time 🍀

    • @trobinou47
      @trobinou47 Před 15 dny

      @@BStarCrafts Many thanks, have a great day too ✨

  • @josefranciscof.rodrigues1575
    @josefranciscof.rodrigues1575 Před 16 dny

    Gosto muito do seu ensinamento ,é uma verdadeira enciclopédia ....E DE fácil ....entendimento ....sou de JAÚ SP.BRASIL 😊😅

    • @BStarCrafts
      @BStarCrafts Před 15 dny

      Obrigado 😊😊 Tenha um bom dia 🍀

  • @Ribakov-is-Divnoqorska
    @Ribakov-is-Divnoqorska Před 16 dny

    Отлично, руки из плеч

    • @BStarCrafts
      @BStarCrafts Před 15 dny

      Спасибо 😊 Хорошего дня 🍀

  • @Plantstud
    @Plantstud Před 16 dny

    Very inspiring, thank you for sharing and showing cool projects. Cant wait to start woodworking when I move into my new house! :D

    • @BStarCrafts
      @BStarCrafts Před 15 dny

      Thank you 🛠️🛠️🛠️😊 Have a nice time 🍀

  • @CraigLYoung
    @CraigLYoung Před 16 dny

    Thanks for sharing 👍

    • @BStarCrafts
      @BStarCrafts Před 15 dny

      Thank you my firend 😊 Have a nice time 🍀

  • @serferinterneta
    @serferinterneta Před 16 dny

    очень красивая работа. спасибо за видео. выключатель надо получше закрепить досточкой сзади. станочек простой и гениальный. впечатляет.

    • @BStarCrafts
      @BStarCrafts Před 15 dny

      Thank you 🛠️😊 Have a nice time 🍀

  • @moreira1315
    @moreira1315 Před 16 dny

    Muito bacana, parabéns.

    • @BStarCrafts
      @BStarCrafts Před 15 dny

      Gracias 😊 Que tengas un buen día 👍🍀👌

  • @xanzzikleo4518
    @xanzzikleo4518 Před 16 dny

    Good day, during your work you probably collect a lot of sawdust, what do you do with it?

    • @BStarCrafts
      @BStarCrafts Před 15 dny

      I also have a lot of trouble with sawdust… It is mainly burned in winter... I am currently planning to recycle it. 😊😊🤜🤛🤛🛠️💚

  • @viorsa8200
    @viorsa8200 Před 16 dny

    Ok, fantástico proyecto,muy bien desarrollado y mejor ejecutado maestro, gracias por compartir, un cordial saludo y por supuesto un merecido like desde Narón (Galicia)👍🤓😜

    • @BStarCrafts
      @BStarCrafts Před 15 dny

      Gracias Viorsa 😊 Que tengas un buen día 👍🍀👌

  • @syngiroo1221
    @syngiroo1221 Před 16 dny

    역시 검은별님 작업은 보고 있으면 힐링이 됩니다. 어쩜 이렇게 야물딱지게 잘 만드시는지 늘 감탄합니다! 참고로 저도 요새 원형샌더 만들고 있는데 당근에서 나눔받은 유선청소기 분해해서 그 모터로 하는데, 힘이 너무 쎄서 ㅠ.ㅠ 알리에서 전압조정하는 SCR 싼거 하나 달았는데, 그것때문인가 싶어 좀 비싼걸루 다시 주문하고 기다리는 중입니다 ㅎㅎ

    • @BStarCrafts
      @BStarCrafts Před 15 dny

      과찬 감사합니다. 저는 약간 약한 듯 해서 나중에 새로운 형태로 다시 만들어볼까 생각 중입니다. 안전 작업하시고 멋진 작품 기대하겠습니다. 좋은 하루되세요~~~ 🛠️🍀💚😊

  • @bradleytuckwell4881
    @bradleytuckwell4881 Před 16 dny

    Very well put together from old parts and it works great. Very nice add to your workshop

    • @BStarCrafts
      @BStarCrafts Před 15 dny

      Thank you 🍀🛠️😊 Have a nice time 🍀

  • @fabricemenoud3296
    @fabricemenoud3296 Před 16 dny

    Très bonne vidéo 👏👏👏

    • @BStarCrafts
      @BStarCrafts Před 15 dny

      Merci. 🛠️🔧⛏️ passe une bonne journée 😄🍀

  • @user-gm2oo7zy1f
    @user-gm2oo7zy1f Před 17 dny

    Не понял, если диск не параллелен подошве подложи шайбу под механизм изменения глубины. А уже потом, как идея упора по срезу - согласен, отличная.

    • @BStarCrafts
      @BStarCrafts Před 15 dny

      Спасибо 😊 Хорошего дня 🍀

  • @yuri69ru
    @yuri69ru Před 17 dny

    Под дерево нужны другие заклепочные гайки - чтоб насечки предназначенные для деформации были расположены как можно дальше от прессшайбы, может даже в два ряда - если Вы хотите использовать эту технологию для дерева.

    • @BStarCrafts
      @BStarCrafts Před 15 dny

      감사합니다 😊😊 좋은 하루 되세요 🍀

  • @mafia6724
    @mafia6724 Před 17 dny

    А есть же специальные для дерева с шариком внутри

  • @Rhacal
    @Rhacal Před 18 dny

    3:50 Minutes looks like you need to rework it! I mean, yes on top view it looks like that it works but when you try to connect it with another surface without 90° angle.

    • @BStarCrafts
      @BStarCrafts Před 15 dny

      Thank you 😊 Have a nice time 🍀

  • @dereinheimische6215
    @dereinheimische6215 Před 18 dny

    Was für ein Sch👎👎ß !

  • @bradleytuckwell4881
    @bradleytuckwell4881 Před 19 dny

    Great idea

    • @BStarCrafts
      @BStarCrafts Před 19 dny

      👋👋👋👋 감사합니다 😊😊 좋은 하루 되세요 🍀