Video

Hey brother, first off I appreciate the information you’re giving on this video just curious for a bolt on coyote stick s197 that plans to get a whipple in the future that’ll mainly used to corner on backroads with the very occasional track outings, for a street setup would you prefer a 19x9.5 up front w/ a 19x10.5 in the rear 285/35/ up front, 305/35 in the rear (9.5&10.5 are the only options for the wheels I plan on getting for the car) or a 19x10.5 on all 4 with a 305/35 on all 4 ? Car will very rarely see the track, it’ll be more of a mountain curvy roads/ backroads type of deal. Thanks again!

What size pipe for headers and exhaust would you recommend for my stock 2014 Shelby GT500 where I live we don't have exhaust testing yet. Would you put catalyst back on?

Rich and Cari, THANK YOU !!!

What do you recommend for lowering an s197 and still keeping good ride quality? I'm running eibach springs with koni special actives at the moment but wondering if coilovers would actually ride better...

Great memories early days of Musclemustang Fastfords.

Thank you Carrie Kenny Rich Brad

Awesome information,

Martin from Trelleborg/Sweden and i drive a 2005 GT convertible . Thanks for all the good content

I just ordered a pair. I'm making my S197 Great Again.

Brake calipers. Differentials. Two other places I’ve seen TTY bolts be used.

Is that Ruby ?

His diction is terrible. He has the communication skills of a tree.

20 inch rims-

I really wanted a Kenny Brown Supercharged Windstar.

Kenny is your father. Luke . may the Kenny be with you

what about on normal use or road use, could be any affection or risk?

Thanks! Horsepower and 🐎🐎🐎🐎

Will this work with a 2022 Mach 1? And why are why not buy this over Steer or some other companies?

I meant to say is the Kenny Brown, suspension parts, lighter or heavier than OEM and if so by how much?

Dissolve the stuff, heavier, or lighter than stock and if so, by how much?

The 3.8 has some potential. I had a 99 35th anniversary 5 speed car and managed to pull a 14.6 E.T. out of it. The car ran 16.1 stock. Diablo programmer, true dual exhaust with H pipe, 1/2" intake spacer (not throttle body spacer), 3.73 gears, Ford locker, full frame ties, short throw shifter, quick throw clutch quadrant. Fun street car, and it pissed a lot of GT owners off lol.

Does the Torsen still use c clips to lock in your axles?

Cool

I would like to know the cons of a having a vented hood if there are any. I know water gets into the engine bay from rain or washing your car but I don’t know of anymore.

In long for the days men wore oversized way too big quasi dress pants!

19:39 Fox: 363 boss block 3.4 stroke

Steering rack limiters for big tires

thank you so much! i was wounder what is the most precise between torsen or clutch. also i hoped it's the torsen because no clutch means no degradation & maintenance

Do you have a recommendation for a suspension kit with all the right bushings in all the right places to be able to take corners at fast speeds in an 84 cutlass supreme?

This guy always has the answers to my s197 questions

I bought the last AGS 3.0 setup with KW's before KB closed... are you guys open again? Couple notes. For your front K member I remember the mounting locations interfered with any aftermarket exhaust manifolds. I had to cut them off, modify them, and re weld. All you have to do is trim the top portion down 1.5 inches. Setting up the rear shock mounting brackets was also a nightmare which required significant modification / welding. Other then that... I have to say it handles insanely well. Friends are white knuckling while I take corners. lol. Good work.

Kenny Brown... I haven't heard that name forever. I bought the last full KW / KB suspension setup after KB was sold and never heard from KB again. Rear suspension could have used a couple extra inches of travel. But corners on rails.

Thanks Kenny or the video. I believe my TR3650 has excessive slop or backlash. Is there a tolerance for this and what you be the fix please? Thanks, Tom

You have the concept of roll center backwards. A low roll center induces more body roll than a high roll center. A high roll center will “shear” the tires in a corner instead of letting the body roll because a high roll center is closer to the COG.

Sad that Kenny cant still be here with us. Great man.

Episode 69

Kenny prefers for a Fox: Windsor 351, stroked out to 363 408 (500hp)

hey there from Jerz

Obviously these are old, just curious when they came from?

My car on here at 3:24. 😀

I would really like to see a video comparing the differential of this IRS versus the Ford explorer. Are they compatible?

I had ball joints installed in my 96 stang up and lower year and a half later they are making noise squeak and it toes in on the top very little I need to have them done again a tech also said I need struts also what brand do you recommend and should I purchase a kit with the whole arm that come with ball joints and new bushings thanx 🇺🇸

How do I make it hold 1000 rwhp

? So what about the good ones like torco or boostane that use MMT like race gas does… this is a bullshit video. Your talking about the shitty owns at small auto parts stores.. there is a couple really good octane boosters like listed above that actually work and are proven on dynos..

Good thing I came across this before driving my coyote swap

So i can beat the hell out of it😂😂on my daily 😊

This is fantastic Kenny thank you for sharing! I eventually want to purchase a high mileage, white 2005 car and turn it into my own FR500S.

A shame Ford/Mercury didn't listen....

Great quality parts, awesome vid.

My first, used SN95 (95 GT) had that split that Mr. Brown is talking about, Right behind the driver's seat. I remember when i finally bought some eBay subframe connectors with seat support. The day i put the car on the lift, mounted the connectors and had to use some screw jacks to press the connectors close to the body for welding. You couldn't see the headrest on the seats from the ground, but as i cranked the screw jacks up, the seats headrests slowly started to become visible. That's how sunken down the floor pan was...😐