- 19
- 43 397
Bacwardz Garage
United States
Registrace 16. 11. 2022
Welcome to Bacwardz Garage! This channel is all about car builds and having a blast doing it.
Chevy Nova brake system FAILURE?! New Ford F100 Farm Truck!
WE ARE BACK! We sincerely apologize for the delay of this video. We want to introduce you to TETANUS TONKA! This Ford F100 is going to be one of our builds for the channel. Along with the F100, we finished the brake project on the Nova by installing all new brake lines, new master cylinder, and the correct proportioning valve for the disc/drum brake set up.
Make sure you like and subscribe to our channel so you can be up to date on our latest videos and be a part of our builds! Thanks for watching!
Instagram - instagram.com/?hl=en
Facebook - bacwardzgarage
TikTok - @bacwardzgarage
Parts Featured In This Video:
Master Cylinder - www.summitracing.com/parts/LEB-FC1009HK
Proportioning Valve - www.summitracing.com/parts/SUM-760182
Brake Line & Misc. Fittings - Local Automotive Store
Make sure you like and subscribe to our channel so you can be up to date on our latest videos and be a part of our builds! Thanks for watching!
Instagram - instagram.com/?hl=en
Facebook - bacwardzgarage
TikTok - @bacwardzgarage
Parts Featured In This Video:
Master Cylinder - www.summitracing.com/parts/LEB-FC1009HK
Proportioning Valve - www.summitracing.com/parts/SUM-760182
Brake Line & Misc. Fittings - Local Automotive Store
zhlédnutí: 865
Video
Chevy Nova Gets Some Cooling System Upgrades! Overheating Problem Solved!
zhlédnutí 6KPřed rokem
Say GOODBYE to old parts and hello to 2023! After 53 years we are finally upgrading the Chevy Nova's cooling system with some modern parts. New electric fan, radiator, and external trans cooler! (PS-in the video I had a brain fart and was running the ground wire to the earth connection on the switch, I knew immediately what I did wrong) Make sure you like and subscribe to our channel so you can...
Install Bash Bars, Make Your 350z DRIFT Ready!
zhlédnutí 469Před rokem
Today we get the bash bars finally installed on the 350z! This car has come a long way since we first got it, and I have to say so far this is one of my favorite cars to work on. We are excited to get this thing finished up and start sending this thing sideways! Special thanks to Josh and the crew at BD Automotive & Restoration for all their help with getting the bash bars to their finished pro...
Taking The Chevy Nova For A Test Drive With The New Wheels & Front End!
zhlédnutí 21KPřed rokem
Finally got all of the front end parts and new wheels so we could wrap up the Nova Disc Brake Conversion and get the beast out for a test drive! Listen for all the Bald Eagles. Make sure you like and subscribe to our channel so you can be up to date on our latest videos and be a part of our builds! Thanks for watching! Instagram - instagram.com/?hl=en Facebook - bacwardzgarage TikT...
First Test Drive with FDF Raceshop's Mantis Angle Kit and Racing Seat Install on the 350z!
zhlédnutí 305Před rokem
The FDF Raceshop angle kit is completely installed! Check out the finished product, test drive, and my final thoughts on the kit. Ended up finding too good of a deal to pass up so we ended up getting a racing seat for the 350z! Make sure you like and subscribe to our channel so you can be up to date on our latest videos and be a part of our builds! Thanks for watching! Instagram - instagram.com...
Installing an Angle Kit on My 350z Put Me in the ER!
zhlédnutí 182Před rokem
Completed the Install of FDF Raceshop's Mantis Angle Kit and Steering Rack Relocation plate! After multiple times of removal and install, we finally have everything ready to go. More action coming soon! Make sure you like and subscribe to our channel so you can be up to date on our latest videos and be a part of our builds! Thanks for watching! Instagram - instagram.com/?hl=en Facebook - facebo...
Beginning The Suspension Teardown On The 350z! Making Room For FDF Raceshop's Mantis Angle Kit!
zhlédnutí 199Před rokem
We begin the teardown of the front suspension on the 350z for the install of the FDF Raceshop Mantis Angle Kit! Along with the angle kit, we will also be relocating the steering rack and installing a rear diff brace. Make sure you like and subscribe to our channel so you can be up to date on our latest videos and be a part of our builds! Thanks for watching! Instagram - instagram.com/?hl=en Fac...
Rebuilding the 70's in 2023! 1970 Chevrolet Nova Front End Rebuild Part 2
zhlédnutí 1,7KPřed rokem
Part 2 in rebuilding the untouched 1970 Chevy Nova front end with little to no fire this time around. Do what we do at your own discretion. Make sure you like and subscribe to our channel so you can be up to date on our latest videos and be a part of our builds! Thanks for watching! Instagram - instagram.com/?hl=en Facebook - bacwardzgarage Parts Featured In This Video: Tubular Con...
New Build is HERE! Classic 1970 Chevrolet Nova gets some upgrades!
zhlédnutí 3,7KPřed rokem
Check out the new build here at Bacwardz Garage! When this one is all said and done, it will be sure to snap some necks and cash some checks. Make sure you like and subscribe to our channel so you can be up to date on our latest videos and be a part of our builds! Thanks for watching! Instagram - instagram.com/?hl=en Facebook - bacwardzgarage Parts Featured In This Video: Tubular C...
Nissan 350z Gets Some TLC! Affordable Mods That Can Change Your 350z's Look!
zhlédnutí 398Před rokem
Sick of your 350z's boring rear end? Today we are solving that unfortunate disaster. Make sure you like and subscribe to our channel so you can be up to date on our latest videos and be a part of our builds! Thanks for watching! Instagram - instagram.com/?hl=en Facebook - bacwardzgarage Parts Featured In This Video: Grip Royal Steering Wheel - www.griproyal.com/shop/brute-350mm-red...
It's FINALLY done! Part 3 of the 350z Hydro Ebrake and Test Fitting Wheels 🔥
zhlédnutí 169Před rokem
It's FINALLY done! Part 3 of the 350z Hydro Ebrake and Test Fitting Wheels 🔥
GKTech Dual Caliper Brackets on the 350z! (Hydro Ebrake Install Part 2)
zhlédnutí 208Před rokem
GKTech Dual Caliper Brackets on the 350z! (Hydro Ebrake Install Part 2)
Hydro Ebrake Install on the 350z! (Part 1)
zhlédnutí 139Před rokem
Hydro Ebrake Install on the 350z! (Part 1)
The Pilot Episode of Bacwardz Garage! (Car Reveal)
zhlédnutí 197Před rokem
The Pilot Episode of Bacwardz Garage! (Car Reveal)
When moving the flaps allow the air to blow through. It will allow the engine to stay cool at idle and driving down the road.
Good job.... need to see more on your Nova. I have done ton's of work to mine on my channel also !!!!
Excellent job. I put QA1 coil overs and a sway bar in my Nova and did it ever improve the handling.......Just finished the rear set up.
This is pretty much the exact situation with my chevelle, replaced the suspension all the way around and front disk conversion. I was on the fence about an ls swap and decided that i'm just going to build up the 350
Not sure if i catched it but what size rear tires and back spacing?
Your car sound like it needs timing. But that sputter could be few things. Check your plugs and if timing is good, play with the PV and squirters.
Appreciate it man! Just added 91 into the tank that day and was mixing so I will be adjusting timing soon when it’s only 91/93 in it 🍻
Front tires 15x7 or 15x8?
Front Wheels are 15x8. Same as the rears just different tire sizes. 🍻🛞
@@bacwardzgarage what size tire on the front?
Where did you get your hood and is that a 4 or 6 inch cowl? Im trying to find a 4 inch steel cowl hood with no mesh holes in the top i like having it all open
The car currently has a 6inch fiberglass cowl with steel framing inside. Hopefully you find the one you are looking for! 🍻
Is it for sale ?
Fortunately for me, Never for sale 🍻🛞
You'll tare that tire up ...novas rearends are offset more on the right..right side will rub..
Haven’t had any rubbing concerns so far but we are keeping a close eye on it!
You Guys Inspire Me ....Still Have My First Car 70 Nova ... Now that Life has gotten in the Way At 52 I need to Get Her back on the Road My has been sitting for 25 Yrs ....
You can do anything you put your mind to! Make it happen cap’n🙌
Gotta learn the carb with the big cam! Couple pumps, and when she start rev her up a bit to 2-2500 after a few she’ll idle!
She can be a little cold blooded sometimes but eventually it gets moving!
@@bacwardzgarage same as my motor.
Gotta learn the carb with the big cam! Couple pumps, and when she start rev her up a bit to 2-2500 after a few she’ll idle!
Good stuff my man! Have a 69 and heads up, those arms being cheap, best to change the ball joints to moog.. there are some horror stories of the cheap stuff braking.
Not a bad idea! Appreciate the idea and thanks for sharing
Que vídeo legal parabéns
Looks good. What size are those wheels?
Appreciate it! Front and rear wheels are 15x8 4.5in bs. Link for them is in the description as well!🍻🍻
Keep it up.. getting some vice grip garage vibes lol but over all keep up the inspiration.. cant wait to start my channel for my 72 nova
Thank you for the support, we are big fans of Vice Grip Garage and glad we can inspire as well! Hope to see your channel up soon! 🍻
Love the nova. Reminds me of my 72. You got an Instagram?
Hey thank you for the support! Our Instagram is BacwardzGarage as well as our tiktok. 🍻
Need to lower front end a bit. Otherwise looking good
Thank you!
badass nova nice well done!
Thank you for the support much appreciated!
Yes the flaps seal the shroud at low driving speeds and open up to allow more air to pass through the radiator at higher driving speeds
You and one other commented explaining this. I was pretty close with my “educated guess” thank you for sharing the information much appreciated!
30A fuse for the fan. The rubber flaps force air to be drawn across the whole face of the radiator by the fan from behind. But if cruising at highway speeds the pressure of frontal air is high so flaps open to allow frontal air to push thu radiator.
I was pretty close as far as my guess, we appreciate the information!
Fremont car show next weekend you should join us
If your timing is spot on try running a lower thermostat it’ll help lowering your temp. Try a 170.
Thing sounds good, should make it louder 😂 Keep posting the classic car stuff, it’s great seeing young guys making them great again!
Appreciate that, we will have more with classics soon as well so stay tuned! Much love 🍺
I'm in the process of building a 74 with my daughter. Keep the information coming.👍
We certainly will! We hope the information was helpful🙌
Nice rims ! But I’m an old Cragar chrome 5 spoke mag wheel fan Nice car
You have a nice one to be fixing up. And you got it going in the right direction. Can’t wait to see what you do to it next!👍
Z’s suck ass. Easy to gap🥸
This Nova is Bad Ass! Love the wheels, they made her look so much meaner!! I just found y'all and I had to Sub this channel, I wanna see her on the strip!! I watch a lot of car videos, have you heard of SRC, Billy the kid, & Old Man's Garage? You can learn a lot from them, a little bit of a lot of everything! Good luck guys! See ya next video!! Needs a Turbo!! 😁or 2!
Thank you for the support Paul! The wheels make a world of difference! Once we get some of the body stuff taken care of we would love to take this down the drag strip. Turbo’s hopefully down the line too! We look forward to seeing more of your comments👍
@@bacwardzgarage Right on! I'm looking forward to watching this Nova get faster & faster! She's already mean, let her dig her claws in that pavement and tear that track up!! ✌😎💨
Nice job love it
All you had to do was count the threads on your old ones and copy it over to the new one.
We plan on doing a proper alignment so lining them up on the ground and then adjusting on the car as close as possible will work for the time being!
Ohh you contributed to the C.C.P. Chinese communist party on buying them wheels, what happened to being more USA....😢
We were having a hard time finding wheels to run this brake kit so these wheels were what worked the best!
Really 8 think you need the bracket it keeps the line from flexing and you stop quicker instead of a loose line that moves and dosent ad that extra force to STOP!😂😂😂
A brake line will flex slightly when pressing the brake pedal but it should not move excessively. With this particular line, it’s so short that there isn’t much movement. Worse case, we use our ziptie certification!
You found it the tallest air filter ever yes😂😂😂😂😂
Gotta let her breathe!
I know I know, I put a 2 1/2 inch low profile filter on my 69 camaro 396 SS and it studders and stalled not enough air went back to 4 inch filter barely could close the hood still works like a champ was just saying it was yr all hope no feelings where hurt 🤣🤣🤣🤣🤣
Nice build man your car sounds and looks good🤟🏾
Thank you Mario! More is coming so stay tuned!!
Don’t dis Eminem he gon come after you and put you in a album
Not meant to be a diss, we love Slim Shady👍
Badass 🙌
It definitely pulls! Stay tuned for more to come👍
American cars please. None of this jap or kraut shit
Are you sure about that?
According to all the 350z forums, all they do is blow up🤷🏻♂️
Love it Bailey!
Thank you Tim!
Nice job guys
Thank you for the support Kevin!
Where you located I'll come get the old parts
We are hanging onto the old parts for now
Great car I have a 71 nova it is my dream car anxious to see what you do with yours so I'll subscribe
We appreciate you subscribing! This Nova is will more than likely be on this channel as long as it’s still running and driving.
Yo how'd you do the dash suede that's freaking awesome I gotta do mine
I didn’t do anything with the dash, that is just how the car came…wish I could be more help!
Put a Boss 351C in it!
We are hoping to do an LS with some sort of forced induction down the line since it’s a chevy. But that is a good idea for another future build we have planned!
😂
Cool Nova. Great story on the engine. Keep up the good work. Keep the videos coming. Oh, get you a Nova hoodie, lol .
Thank you! Glad you are enjoying the videos. Plenty more to come!
That engine was built for a Camaro originally.
Great video guys! What do you think of a carbon hood to match your black wing? Would look really cool with the black and red contrast! Maybe even do a wrap for the hood
That’s not a bad idea! With the wing and hyperblack wheels it could bring that contrast and look super nice. Appreciate the idea!
Thinking about doing this to my focus😅
You should get another RWD vehicle and then do it😅
@@bacwardzgarage fwd