Video

Quitzon Ports

Hoeger Island

Shaun Rue

Berge Spring

Zackery Heights

Kautzer Field

Yost Walk

Payton Rapids

It's always fun when the caliper pins are rusted frozen, and you heat them up with a blow torch and they explode and fly across the shop.

Thiel Street

Imogene Springs

Sydney Crest

Everette Light

What a waste of time..... thanks for the instructions

Koepp Mountain

So..show us all how you did it..!!!!

Boyd Street

Enid Mission

Thanks for this video. All the others tell me what I already know. I just purchased a 2016 suburban with 2 working transponder keys. Wanted to have additional spares so purchased 2 blanks online. Had them lazer cut but the locksmith was unable to program to the car. Your video suggests he should be able to see how many keys are programmed using a scan tool. Is this correct? Any suggestions? Thanks.

you didn't explain how button works, no more donuts for you for a week!!!!

When I´m doing a class presentation and I forgot all what I was gonna say...

vacuum leak clogged fuel bad injector

I’m getting a p2541 code on a 08 maybach the sensor was ohm and reading good what can be the problem

THESE GREEN PEEPS ARE SO STUPID ELECTRIC CARS ARE WAY WORSE THEN GAS WE HAVE TO STOP LISTENING TO DUMB ASSES IN GOVERNMENT .!!! THIS IS WHY ALL GOV ARE GOING TO GO AWAY THEIR ALL CRIMINALS./!!!

Useless

I like your garage, dude! 🙃 Good info, thank you for posting it. I’m changing my truck’s brake pads and was wondering about whether or not to buy (IF I can find them) new hardware / pad mounting clips. This vid helped me decide to go ahead and buy them. Next challenge is finding them - I bought the pads but it came without the hardware. 🙁

Ok, I see you have the same intelligence as a beef steak. Good job, you earned a thumbs down.

Can I get a bad oxygen sensor reading if I have a clogged air filter?

Reminds me of mr wilson from dennis the menace when he replaced his teeth with chicklets

Thanku for this video...maybe u should do a utube.🤷🏻‍♀️

Just found out I have a cabin filter...😢after owning our car 5yrs. It was loaded with black mold.i was breathing it..omg...please tell more folks Pass it on. Especially woman don't no it's there.❤

TIP -- Don't try to go cheap on your caliper grease!! I use Permatex Synthetic Brake Lubricant, $25 for 8oz. My Ranger went a year between brake inspections, had the good grease on the slide pins and the hardware, still slide the caliper back n forth by hand! Have used cheap grease before, brakes failed, the grease looked like dog turds and nothing was lubricated!!

Just FYI for everyone I have a 2012 cruze . Changed the oil at 8.5k and olm 20%. According to blackstone I could have drove it another 500 miles before tje tbn became low. The tbn was at 1.6 low is 1.0.

Oh good god!! When MLS head gaskets 1st came, the big selling point was that they could be re used! Don’t shit a shitter!

Worthless waste of time video

Wix has offshored most of their products. Lots of different owners over the years.

Well done video - good content and production.

So believe it or not, my cabin filter from Amazon does not have any arrow. how the heck do if figure out which is the right way to put it? I am guessing flow is "downward". So I can look at one side vs the other of the filter to figure this out? Maybe color? I have a toyota highlander FRAM filter

Spray on liberally pb blaster the day before. Next day warm up the cat then spray on more pb liberally, then bang the sensor with happier several times. Do that three or four times. Sensor will loosen up now. I used the o2 sensor wrench available for free use from autozone.

The solution is not to lug your engine. Downshift when you need power!

Terrible video.

He is right, we all have to keep up with the changing technology, and the automotive part is certainly no exception. However, our tools are so expensive to buy and transmissions are so advanced today, R&R a reman is a smarter move for profit, like the topic. 👍

I came to this video after replacing my rear struts on a front-wheel drive car. The outer edges of the rear tires are down to the tread-wear indicators after only 20,000 miles because the rear structs were on their way out during that time.

Haha are you joking man ? And you give your name too, Do You feel proud to tell me to read the manual ..

I have positive High LTFT & STFT, LTFT %26 and STFT 18%, STFT increasing with high RPM and LTFT degrees with High RPM but not gose less than %18 whatever RPM, Example, LTFT %26 and Change to 18% once touch accelerate paddle and stuck at %18 even if 6000 RPM, I made smoke test but no leak at all Replaced Valve cover including low pressure fuel pump with filter Also changed intake gasket but still same symptoms, Last thing replaced Bank1 sensor 1 O2 sensor, You think bank1 sensor 2 O2 sensor causing high fuel term or something else ?

I believe I have a bad wheel bearing. As I drive along I can turn the car to the left and it stops making noise. I continue on and turn to the right and it stays the same. Not much louder but it doesn't go away like it did when I turned left. Does that tell you anything? thank you for your video

Thanks Peter Griffin!

how much it's cost in the Phil.?

My RV head gasket just blew out, this should be interesting and expensive

is this a joke video?