Video

Thanks, that was really helpful.

Great .but GM mechanic told me to make sure its running , a nother words then you took the bolt out and it was flowing out instead of seaping out, if running it would have just seaped.. So according to him, you're trans is now low..he even said have it running as your filling it.not saying your wrong and the GM Tec is right or being rude I'm just saying what he said .regardless thanks for the video

...or you can get a cigarette lighter type that just plugs in!

That pilot flies low like he's on a bicycle, he's got skills!!!

thanks, I have done tires , but never consider this method,.

Thanks for confirming that’s it’s not worth fixing. dewalt needs a recall mine stopped after little use been using Dewalt for 20 years will never Buy another tool from them again.

What about ones with liners

Thanks for posting. My Bosch HMC80252UC also failed after only 5 years!!! The problem was on the Left side switch which fried and jammed. This happened because of the WEAK design of the plastic holder which holds down the switch with a thin "finger" that will eventually bend due to obvious torque (planned obsolescence?). It would have cost BOSCH nothing to design this properly so the switch would NEVER EVER move. My solution was to add a shim to ensure the replacement switch is SOLIDLY in place & will NEVER move! (even gluing it in would be better). NOTE that the left side switch is NC and the right is NO.

Thank you Buddy..... GOD BLESS

Thank you so much, worked perfectly first time, no troubles. You are very smart man I hope you receive many a present on your next birthday.

Mine must not be black algae because it turns to dust

For what Keurigs cost they really are junk. If there are some simple maintenance related fixes that could be done then Keurig should have made access for repairs a lot easier. Family and friends all say they last maybe 2 years then they toss them.

Get yours here - amzn.to/4doB6nw

It now works!! Thanks for info. Great video😊

In my case 2 last digits are ok to find them out but 2 first digits u cant feel any difference. Also if u lock this lock so the combination part of the lock is inside the wheel it is almost impossible to pull them apart, no space between spokes of the wheel to put hands inside.

Device is no longer being sold

Just tried to replace my battery for the first inte and they are now spot welded. I got them for christmas about 2 years ago.

Game name

This blootooth is so hard to connect 😢

Thank you for the video. My 4 year old DCCS620 quit in the middle of cleaning up storm damage. Checked the brake, pulled the trigger, and ... nothing. Changed batteries and ... nothing. Followed along to disassemble and found ... the chain brake switch is as dead as a door nail! And of all the micro switches I have in stock, not one has the same style lever. So I ordered some. One thing I did, while following along, was to note the length of each of the 22 screws that hold the housing halves together. I found there are 3 different sizes: 13mm, 15mm, and 25mm. Edit: Further testing found that in addition to the dead brake switch, the trigger switch is defective. When pulled, the rear contacts go from open to 0.8 ohms. But the front contacts bounce from open to 10 megohms to 6 megohms to open and back. So I ordered a replacement from AliExpress (about $12). We'll see how things go when all the parts get here. Oh, one more crazy fact. While most of the hardware on the saw is metric, the screws on the trigger switch are 6-32. Go figure.

I wasn't sure this would work, but it did for my K-Elite. Thank you!

I have a bypass seal that is leaking. Can the bypass seal be removed and replaced without draining the oil and removing the transmission?

This is the first time I have actually seen the video. I was a contractor assigned to the 1/1 but was instructed to stay back from the unit until the ground war was over. When I did fly up to join the unit was when I learned about this. I worked for Martin Marieta at the time which we worked on the TADS/PNVS night vision systems. I heard a lot of rumors about the commander Hayles not sure if they were true but know for a fact if you ever questioned him and he was your commander you better be 100% correct or your Army career would be over.

thank you!

In the 1980 I installed a voltmeter in my car. I didn't need a mobile phone or Bluetooth.

Man at :34 it would look good to have some more on either side of the four you planted. Kinda keep continuity and have them on the whole wall

is this good for 1/0 AWG ?

Great fix! I went to Loews and fit the parts for less than $20. Put it in and it works great! Thanks so much!

My lock doesn't snag when i spin it clockwise with the top part raised slightly.

Apache warriors is a great documentary if you haven’t seen it.

Thank you for this. I didn’t see your video in the first few that popped up it then I pressed “more videos “ and clicked on yours. I had given up and was going to take the wheel and tire to the tire shop but I tried your idea and success! Thanks again. I had a hell of a time getting the tire off the rim. I could not break the bead. I had to cut it off. It had never been removed since 2012 when I bought it!

Great idea! I’m so tired of losing that square nut. I’m still wondering why the batteries are designed that way.

Thanks, tried combinations from the beginning for 1 hour and didn't work, after your video lock opened after 3mins

I have the same saw with the same flaw in it . Piece of shite. Wont start.

This worked, thanks!

I watched a few others a no no no those weren’t it ha ha the simplest one was the button and you helped me figure it out so thank you so much for taking the time to make your video so many of us greatly appreciate ya. !!

Мокрая курица, на фоне Ми35, про К52 вообще молчу.

I don't understand why they designed the AC condenser to dump heat into the radiator for the engine. I have been in a car that was overheated and stopped running the AC, even though I Needed AC as my heart was going nuts trying to cool me down. Idiotic design! Dump heat Away from the engine, not Into the engine! My heart behaves worse and worse the hotter I get. I will Die in 100°F and if the car can't cool me down and instead Blows Hot Air at me, that is a threat to my life! Do better, car engineers!

The manual tells you to clean the air filter but there is no mention of an air filter on the parts diagram in the manual. I have looked all over the internet every which way and I cannot find any mention of where to find the air filter on this thing! Does it even have one?

Much appreciated, especially taking the lid section apart, sipping as I post!!!

After 2 years from when this post was made, it’s still a help! Thank you sir!

Brother thank you for the power down reset. I have music AGAIN!!👍❤

I loaded it but still no grease. Where is the primer button someone mentioned!! Why would you Not mention it????????

Could you post a how to for this kit? The instructions seemed clear, but I’m unsure how to get the TC and FC when there’s only one column for chlorine. Pool newbie here if it wasn’t obvious

This was 6 minutes to long

The key is to push down

Could this apply to kitchen aid

What about a Master lock that goes from 0-19? How does one compensate when adding the +5?

I did it and it won’t open to the new code and now it’s locked and 000 doesn’t work what should I do