Video

You should have threads on the brackets that comes with the windscreen otherwise there is no other way to fasten it. PM me on FB: facebook.com/profile.php?id=100088561365809 if you need help!

Hi, The bolts as you saw in the video are different from each other. About the gap is only 10 - 20 mm (1-2 cm). You should have got some kind if rubber distancers to put between otherwise get ones by yourself and place them on places shouldnt bent the radiator flenges. They are important, because if the guard flex while riding it could casue damage. If the gap is big you loose a little of the protection and mud and dirt could come in between. Thanks for watching!

GB racing is the name. Ya the MT 09 Gen 3 is a nice bike.Thanks for watching

Hi, no. Some coolant drops will come out but not much. So nothing to worry about. Thanks for watching!

My pleasure, thanks for watching!

Great guards, and I get very nice feedback on the looks too

First and the most important you need the right tools! Have a long ratchet to have control, have the hex head fully pushed inside all the time while you try to untie it. That bold should be the only one to be untied that time all other ones should be untouched tightened. One tips is to have it warmed up, have a ride to make it warm. Be careful to not damage the bolt not the engine! Let us know how it went for you. Good luck!

Thank you it ended well 😁

I would recommend these instead czcams.com/video/I0eEakyj7ug/video.html

Yes

My pleasure!

My pleasure!

My pleasure!

Ya I heard that too

Ya I saw these. THe thing not many can get those in time and the moment is gone. The video is to show how you can do it when you are not prepared at all. Thanks for viewing my channel and your advice ! 😊

My pleasure! do you have any photos or video I can see so I can help you?

My pleasure! No exactly! that model that needs you to make modifications is for the previous model the GEN2. It fits this GEN3 but with those modifications. The second one I installed it was the right model.

Thanks for watching! I bought it from Aliexpress

Thanks for watching! Here comes the link: www.aliexpress.com/item/1005004024625564.html?spm=a2g0o.order_list.order_list_main.55.584818027wZOH8

Yours didn't drop and all even though we did the same thing

Thanks for watching! Did you really work on one bolt and one side at a time? It is very important that you re-tight the bolt you work on even if you put it back for a reverse work. Did you solve it?

Thanks for watching and the information. I really thought about that and I saw another video about it. But does this thin foam damp the noise?

Probably slightly maybe.. Sponge also probably for helping vibrations from the bike to.. But the new covers would do a better job I think..

Please could you check the other side.. message 😊

@@chipwood67 I wondering if I will use some fire resistant isolation material instead as it can get very warm there

Thanks for watching! Let's trust that the kits are made to fit exactly. Then you should be able to use the original copper washer. I did it with mine ☺

Thanks for watching! Im happy to help

Hi, ere you go: aliexpress.com/item/1005004412584212.html?spm=a2g0o.productlist.main.7.20772cdbQRyHXc&algo_pvid=5edd2e7d-f490-49cb-b36b-3069ca000108&algo_exp_id=5edd2e7d-f490-49cb-b36b-3069ca000108-3&pdp_npi=3%40dis%21SEK%21809.72%21688.23%21%21%21%21%21%402100b88516836612813692179d07b4%2112000029092517081%21sea%21SE%21903378926&curPageLogUid=ZlnX99vzdZ7S

Hi, It is a birch tree from near where I live. Just cut with chain saw. I like to make table/ tables and other things from tree when I have time

Hi, thanks for watching! The purpose of the video is to share knowledge. But sure the quality of the things we want to have on our bikes should withstand. It would be nice to get in touch and talk about your products. Thanks!

Thanks for watching! As you see Im doing the torque with my hands as I have been doing this for many years. But I also did the torque afterwards. The bolts torques are seen from the side (according to the service manual): - The front bolts of the frame and engine 60Nm - The back bolts of the frame and the engine 45Nm Happy that I could help you, and happy new year ! 🎉🥳

From AliExpress: www.aliexpress.com/item/1005004803304029.html?spm=a2g0o.order_list.order_list_main.65.70471802CFn8E0

Happy to help thanks for watching

Hi, the service manual on page 2-12 states the following Generator cover bolt M6 2 12 N·m (1.2 kgf·m, 8.9 lb·ft) Generator cover bolt M6 8 12 N·m (1.2 kgf·m, 8.9 lb·ft) Clutch cover bolt M6 11 12 N·m (1.2 kgf·m, 8.9 lb·ft) This is how you should tight them. The manual from RG Racing states 10 N.m which I dont recommend Have a nice weekend

Happy to help and thanks for watching!

Thanks for watching and the information! I have checked the service manual and it says: - On the page (2-9) on the "CHASSIS SPECIFICATIONS" the following: Drive chain slack (Sidestand) 36.0-41.0 mm (1.42-1.61 in) Drive chain slack (Maintenance stand) 36.0-41.0 mm (1.42-1.61 in) And on the "PERIODIC MAINTENANCE" page 3-18 you can read the following: Drive chain slack (Sidestand) 36.0-41.0 mm (1.42-1.61 in) Drive chain slack (Maintenance stand) 36.0-41.0 mm (1.42-1.61 in) Drive chain slack limit (Side-stand) 46.0 mm (1.81 in) In my opinion you can use the sidestand, centralstand, or the maintenance stand

I missed that ok good one @@swedrider

@@bluetoast8584 My pleasure!

Thanks! Ya thats how it shoud be done as I mentioned in the video. Many riders are mixing these specs with other bikes

Exactly! Thats why I mentioned that my chain has only 500 ish on the ODO meter. If the chain is older then we need to turn the chain and at the sametime try to find the tightest place. Thanks that you mentioed it and for viewing my videos 😊

Ya, thats why I felt with my fingers when I brought the bike from the dealer with only 26 km on the odometer. With that said it made me feel the "original" set up

Happy that I could help, ride safe!

Ja den är det verkligen. Jag brukar säga om den "mitt i prick"

@@swedrider Jag har köpt en likadan 2023a ❤️🥳

Hi, thank you for watching my videos! These settings are for the city riding. If the riding is more of a racing or other style the settings should be other I think but Im not really sure about it. Haven't got an answer to this question form Yamaha yet. Have a great day!

Can you show a link?

@@t.m9341 sorry what link?

Thanks! Ya the most important is to feel a bit relaxed when the bike is more protected

Hi, sure here it comes www.manualslib.com/manual/2804501/Yamaha-Mt-09-2021.html I think you can download it, search for "chain slack"

Yes you are right! Here comes the part description from the shop: For YAMAHA MT09 MT-09 2021-2023 For YAMAHA MT09 SP 2021 2023 For YAMAHA XSR900 2021 2022 For YAMAHA FZ09 2021 2022 For YAMAHA Tracer 9/GT 2021 2022 For YAMAHA Tracer 900/GT 2021 2022 Thanks for waching!

@@swedrider You are welcome.

Happy to help! Mine came also with small scraches and I made some small touch up on that place. Turned out to look very nice as you saw. I agree they really llok amazing compared to other protection parts. Good luck with yours!

Hi could I get the link to Amazon or the name

These I have bought from AliExpress, sure I can paste the link here, you will find one with logo and one without. www.aliexpress.com/item/1005004412584212.html?spm=a2g0o.productlist.main.7.20772cdbQRyHXc&algo_pvid=5edd2e7d-f490-49cb-b36b-3069ca000108&algo_exp_id=5edd2e7d-f490-49cb-b36b-3069ca000108-3&pdp_npi=3%40dis%21SEK%21809.72%21688.23%21%21%21%21%21%402100b88516836612813692179d07b4%2112000029092517081%21sea%21SE%21903378926&curPageLogUid=ZlnX99vzdZ7S

I do agree about that. I have a friend who bought his from Yamaha and had also the same problem. I will see how they will perform this summer otherwise I will change to other. Will make a video on that then. Thanks for the visit and the tip and have fun!

​@@swedriderHey, most tank pads reccomend heating both the pad and surface with a hair dryer or hot air gun to improve to quality if the glue bond and allowing the glue to cure for 24/48hrs. This will help prevent peeling in the future.

@@TheKez1a I agree with you. The reason I didn't do that was that these pads är cheap and I want to see how bad they can intract with the paint first then I will put new ones. That make it easier to change them to other ones. Thanks for your comment appreciate it! 🙂

Yep the glue is horrible... Attached the tankpad on my new MT-09 and the glue is literally everywhere. In the manual was written, that you place it on the surface, press all the corners with 3kg pressure on the surface, wait about 24 minutes and then you can remove the rest of the glue from all around the pad. Well, there is my problem, because there are many little pieces left on the edges of the pad...

@@xxentonxx7483 Ya it is not easy to get rid of the glue on the edges. For me seems that the pads did shrink a bit and left the glue at the same size as before

Thanks! Ya I saw it but some others said it is not. I will try to use those torque specs