- 100
- 122 512
Dustin Hiett
Registrace 10. 05. 2012
Scratch Built PT-17 - From Jack Strickland plans
This plane is owned and piloted by Terry Foote. It was built by the late Herb Brown from Alvin Texas. These flights were on June 19th at Tri-County Barnstormers club.
zhlédnutí: 241
Video
Viper upgrade to the 90
zhlédnutí 218Před 21 dnem
Well I finally sold my Viper 70m and got me the Viper 90 by Eflite. This was a great upgrade.
Bird of Time. 117in
zhlédnutí 1,7KPřed měsícem
I got me a bird of time from the same guy at my Fly Baby. Only had to add servos and change the ESC. Plus a receiver. Look like it will fly fine on a 3s.
The Fly Baby wins Best of Show!!!
zhlédnutí 794Před měsícem
Attended the Cubs and High wing event at Space City RC in 2024 and took home Best of Show!!
Hangar 9 J3 Cub tows up a glider
zhlédnutí 72Před 3 měsíci
Fresh Fish to the glide tow game. Marcelo and I have never done a glider to before this flight. All went well and got to do it several times!!!
Fly Baby, fly!! Balsa USA 1/3 scale Fly Baby. Satio FA-270T
zhlédnutí 2,2KPřed 3 měsíci
Picked up another second hand airplane. This one was expertly built in the 1980s. I replaced the servos with HiTec HS-645MGs, new batteries and a Spektrum AR-8360T.
Plane Funkey
zhlédnutí 135Před 3 měsíci
Club member brought me this thing and I got her running again. I’m bummed I forgot to get someone to film the flight. But it was fun, and I have found that I really like to bring back the older glow and gas models.
Godfrey/Precision Lazer 200 96in
zhlédnutí 95Před 3 měsíci
Got this plane from a club member, Jim, and I’m the third or fourth owner. It has a Husqvarna chainsaw sleeve on it and that is how I found a replacement carb. It’s a 72cc two stroke. Has Futaba servos but I plane to swap them out for HiTec metal gear versions. 755s or 7955s.
Near death of a Hangar 9 J3 Cub 80in. (2m)
zhlédnutí 502Před 4 měsíci
I got this Cub in a bundle deal and it had a tired .46 on it that could barely keep it in the sky. So I changed it out for a Saito 72 and then later a Saito 82. On this day I had also upgraded to Robart landing gear. This was becoming my favorite plane in my hangar.
Spacewalker returns to the sky. Seagull models Spacewalker .46
zhlédnutí 998Před 4 měsíci
Another second hand model I got for a really good price. I cleaned the carb and tank. Added new fuel line and a glow plug. Got her in CG with the battery and we are off!!
Limon chases the MIG-29!
zhlédnutí 736Před 9 měsíci
Limon - was at the field when I brought out my FreeWing MIG-29. Thanks to him for the footage here. I'm running two Spektrum 6s 5000mha 100c packs in the back and mid tray areas with a CG point 5-10mm behind the factory markings. Big thanks to @IvanEfimovLimon for burning some packs chasing this $h*tP*lot!!! Checkout this channel: @IvanEfimovLimon His Instagram: @ limon.fpv His sto...
5th FPV flight - Commander between the trees
zhlédnutí 99Před 10 měsíci
This is my 5th FPV flight. It is an Eflite Commander with a Spektrum 8 channel RX and a Spektrum NX10 TX. It has a Caddx Air unit micro, Matek F7 FC for INAV and OSD. with GPS. I use a Tally-ho head tracker as well.
First FPV Flight on the Commander
zhlédnutí 195Před 10 měsíci
This is my first DJI HD FPV platform. It is an Eflite Commander with a Spektrum 8 channel RX and a Spektrum NX10 TX. It has a Caddx Air unit micro, Matek F7 FC for INAV and OSD. with GPS.
Uncle Bobs SIG Smith Mini Plane - We won People’s choice award!!!
zhlédnutí 597Před 10 měsíci
We won the people’s choice award at the SPARKS 3rd annual Vintage RC Fly in 2023. Then we won my clubs Model of the month award!!! This model is one of several models I got from his son Dallas. I hope get a few more brought back to life soon.
Thunderbolt greatness! Hangar 9 P-47D 20cc
zhlédnutí 950Před rokem
New to me Hangar 9 P-47D Thunderbolt 20cc. It has a DLE20 and HiTec servos. An 8 channel Spektrum receiver. I started with 2 oz of lead added to the nose to get the book CG. I have sense removed that lead and she flys great. It now has a 15x8 wood prop.
Rainy day maiden of the Hangar 9 15cc Carbon Cub
zhlédnutí 4,7KPřed rokem
Rainy day maiden of the Hangar 9 15cc Carbon Cub
Ugly Communist Leader on the tail feathers of a MIG 29 by Freewing
zhlédnutí 873Před rokem
Ugly Communist Leader on the tail feathers of a MIG 29 by Freewing
Accidental Maiden Flight of the Black Horse F4U-1D
zhlédnutí 1,3KPřed rokem
Accidental Maiden Flight of the Black Horse F4U-1D
Time to fly a fish! Freewing MiG-21 Fishbed 80mm
zhlédnutí 2,6KPřed rokem
Time to fly a fish! Freewing MiG-21 Fishbed 80mm
6S power = Hauling the Mail. Banana B-25 moves now.
zhlédnutí 711Před rokem
6S power = Hauling the Mail. Banana B-25 moves now.
Great Flying, Great Planes Ryan STA-M O.S. 91
zhlédnutí 569Před rokem
Great Flying, Great Planes Ryan STA-M O.S. 91
More Gas power in the hangar- Old Black Horse F4U-1D Corsair 1740mm with NGH GT-25
zhlédnutí 611Před rokem
More Gas power in the hangar- Old Black Horse F4U-1D Corsair 1740mm with NGH GT-25
Hellofagood time F6F Hellcat - Hangar 9 15cc
zhlédnutí 1,2KPřed rokem
Hellofagood time F6F Hellcat - Hangar 9 15cc
The FT Freedom Fox is Hot - Airflow Mod
zhlédnutí 932Před rokem
The FT Freedom Fox is Hot - Airflow Mod
Learn from my Mistake. FT Freedom Fox V2 follow up.
zhlédnutí 2,2KPřed rokem
Learn from my Mistake. FT Freedom Fox V2 follow up.
Very nice... the model, the flying and the videoing. Can a pilot be added to the back cockpit or is the scale too hard to match with a pilot?
@@BillKisel probably could but the build did not have a floor in the cockpit
Nice Flight and you nail the landing good job Congrats on the 90mm
Thanks for the compliment! Blue Sky’s to ya
Sweet jet! You should fpv it!
That thought did cross my mind.
Sweet!!!
So are your chocolate chip 🍪!! I hope you plan to bring some to our Fly In Saturday.
Beautiful plane. I love the Bird of Time, its iconic looks are unmatched. Happy flying.
It is a unique design. Thanks.
У меня была такая птица на 1600 мм. Как только вы правильно выставите центр тяжести (когда планер летит ровно без двигателя), тогда вы поймаете кайф от полета. Не бойтесь набирать высоты эта птица высокого полета. И тогда посадка для вас не составит труда даже без FLAPS. Жаль что она из бальзы её очень легко сломать.
It is a glider, motor is used only to gain altitude and then enjoy catching thermals. Trim the glider to fly level with the motor off. A good way to set the correct CG on a glider is to gain altitude, turn off the motor, dive in a 45º angle and let go the elevator stick, if the glider nose goes up it is nose heavy and if the nose goes down it is tail heavy. I know that this sounds as the opposite but it is correct. This happens because the trim int he elevator has to compensate for the incorrect CG.
Sounds right to me. I’ll give it a try.
I would put some air brakes in the wings. They will slow it down tremendously for easier landings. I installed mine right behind the top spar
That’s a good thought. Thanks
@@dustinhiett9594 czcams.com/users/shortsNVb-Y1Ks0oE?si=5VwTA4x6BdzXsRhB
@@dustinhiett9594 czcams.com/users/shortsNVb-Y1Ks0oE?si=bTsbJoEuo6GCmjAl
Nice BOT. Beautiful flight finally.
It is very nice. Thanks for watching!!
What's best for reapplying decals that have come off and flapping around?
I’ve not found a good way other than a replacement set.
Lovely. Is that from the Balsa USA kit?
Yes it is.
@@dustinhiett9594 Far out. Keep up the good work, and thank you for sharing your toys. That’s a beautiful airplane, and well-flown.
That was awesome!!! Congratulations!!🎉
🙏🏼 Thank you
I agree--the scarf is super cool. Beautiful work and congrats on the win!
Thank you sir!
I have the Seagull models Spacewalker 46 with a Saito 62. I have that plane a long time now and its never been crashed and still flys great. Good luck with your Spacewalker. Its a nice flying plane.
素敵なビデオをありがとうございます😍
And it can carry a whoop for fpv :)
What's better than a 1/3 scale flybaby biplane??? A full scale!! I love my bipe! czcams.com/video/jznau9WvA5o/video.htmlsi=otwzEcr-b2CXJEcR
Of course, I know nothing. But, I was wondering once you get the trim for take off just right, if it is not best to just leave controls in neutral? Marcelo?
You know its a good morning when you see a video by Mr. Hiett freshly uploaded. Awesome airplane and great maiden!
Thanks buddy!!
Lovely colour scheme, reminds me of a super aeromaster. Happy to see pilots having fun, but those bunnyhops was a tedious affair. Would have been safer to just go for it and get some height. Seems like you really love the glow fuel and the vintage engine...could get big bucks on ebay for that. A nice non 3D flight. Red and yellow are just the colors for me! Cheers.
@@markwest759 thanks watching and your comments. I do love bringing them back to life and in the sky. Happy to get more four stroke glow engines going up.
That sir is a beautiful model
Love the Carbon Cub SS. 2.1m Foamie, So after watching this video and a few others I decided to go ahead and build this onw with out Barbie. It should cost me around 1.5 to 1.7k for my build but it will be STOL ready. Enjoyed watching your video and hit the like and subscribe.
Thanks and good luck on your build!!!
Not Loving your flying site too many TREES
Does have lots of trees, but we say if you can fly here you can fly anywhere.
Sounds WAY cool
You landed on tail wind, that's why you came in hot
It was light and variable that day. Mostly a pilot error.
I'm torn between Cougar and Fishbed. Which one you reckon I gotta get ?
@@henryairconcepts2999 I haven’t flown the Cougar but have only heard good things about it. I did lean that my CG was just fine on this plane, I just needed a little more expo as I was a bit nervous and twitchy on the thumbs. I have flown this bird a few more times and love the delta wing and high alpha it will do. Much better landings now too. 😁
looks good, never thought to repair one, I crashed mine , but i think it was worse off, broke the fuselage it was a trash bag cleanup 2.5 hp gas 540 edge seagull 70+''? wingspan loved that plane.
all the bits went into a aeroworks, still haven't flown it, assembled it 8 years ago. going to try to fly it this summer, if the stars align
Dang bummer on the 540. I hope the aeroworks flys good for ya!!
Holy Mother, molie, smokes, and crap...Marcello is a wizard AND a saint--amazing work--expertly crashed and expertly fixed...not to mention expertly documented!
He is a miracle worker!!
I refuse to fly anything but 4 stroke. If I'm waiting money on glow fuel, best run perfect and sound even better. One thing I never missed from the yesteryear of rc was fighting the cheaper brand motors. O.S. is pretty much it. Old O.S. FPs just ran for ever! Get a nice Satio or O.S. 50 size four stroke. Even a 60 size would work well in that model.
Just might dig up a Satio 52
Beautiful. Can you use 8 channel receiver? Or does it have to be 10
It could be eight.
Awesome flying nice landing. I’m flying my ft tutor FPV and love it
Thanks! FPV is so fun.
Love the music addition. Fits the chase scene perfect!
Hell yeah!!
Too bad those guys with all their combined knowledge they coulda figured out that there wasnt enough air cooling in the nose of the plane...Duh
It took them a min, but they did figure it out and provide a file for us to 3d print and add to this thing.
Sir I want to become rc plane having 2kg weight I will use edf 70mm- 6s motor then tell me which is suitable battery for this rc plane mAh??? C??? Please reply me sir I request you
What version is this??
Pro edition. Metal gears and metal tracks
Wish you had made a video of making the mods, nice job
These are pretty cool tanks I have The m1 abrams tank
They are cool. I let mine run out of smoke oil and I think I burnt up the heating element. I need to get it taken apart and see if I can fix it
I have one of these kits!!! I’m about to build it!!
Love glow..just bought on to add to my electric fleet. Watch out for those chemtrails..😂
Use your electric planes to practice engine out scenarios. Practice a bunch as that glow will get you one day
@@dustinhiett9594 Thanks for the tips. I saw it hanging from the ceiling at hobby town, it has a os40, servos, tank, no reciever and crusty monokote..I re covered the fuse, the wing is being refinished..sky raider 2 for $ 65..not bad.
@@Workerbee-zy5nx heck of a deal!
@@dustinhiett9594 🤠👍
Nice, well done!
Thanks a bunch and good luck to you on your next maiden.
P-40 and gladiator bipe to maiden next summer, a lot of fun and...........stress, haha!
Stressful for sure
Great job! Nice flying. Just got this plane. I have the silver version. It has electric for now but I might replace with Saito 20cc. My hangar 9 Corsair does well with the Saito 20cc
@@mikemetz8016 Satio is always a great choice. I’m running the DLE 20 as that’s what it came with. Good luck on the conversion if you go that route.
I would not buy from motion RC junk airplane
I love the sound and smell of a nitro motor ! That looks like a Goldberg Eagle I had about 30 years ago..
Based on the wing caps I think it was a Hobbico Avistar 40. but who knows many kits of this style seem to be almost the same.
@@dustinhiett9594 Looks like a Hobbico Avistar 40
That bird seem to float like a party balloon, very nice!
Floats like a cub. A low wing cub.
Taking one out for a maiden Sunday! Wish me luck
Awesome work brother. You two did great. Love seeing people resurrect wrecks. I pull them out of cans at the field and people think im nuts. Til i bring them back😮..
Thanks. I always say, Balsa flys better!!!
great video. I have the same plane that I'm converting from electric to gas. (dle 20cc). where did you install the choke servo and vent line from the gas tank. I can't wait to fly it on gas. Thanks
Smokie and shoots paintballs .X-L-N -tank
What is an X-L-N-tank?
That was AMAZING! Awesome flying to both you and Ivan! Who was flying that crazy EFXtra? I'm sure, next time, the pilot will do a better job of keeping you in view...maybe. Definitely a shit pilot, that guy
Next time..I hope is soon
Awesome chase!! Total thrill ride!! Way to go 🙌🙌
When I was flying I never knew Stan got that close. It wasn’t until Ivan showed me FPV view
Was a very fun opportunity for me to chase that beast :) Hope to do it again :) Shit pilots in command!
We will do it again.
THE INFORED OR MUSHROOM BELONGS TH THE FOWARD VENT HATCH IN WHICH THERE IS A MAGNET UNDER IT
Beautiful rebuild. She has a second life.
Thank you very much. My late uncle Bob would be loving it!
If you don't mind me asking what is the total height Trying to see if there's any way To get this to look in scale with six inch g I joe classified action figures for photography thanks and great content BTW
9in tall and 16in long
@dustinhiett9594 thank you my frend