Video

Thank you for the very nice and clear introduction! It makes sense to me now :). I'm 3DSQULPTS, sculptor of the Thief and Tiger and I wish I knew all of this when I supported it for testprinting and release. My question is, do you have a goto grid interval (more or less) for tall prints or do you go with your guts? For example, I'm supporting a cape that is 200cm tall and about 18 wide. so it fills the plate of a midsize printer and I tend to oversupport it. Cheers and thank you for your videos (and nice words about the sculpt ;) ).

looks like Lychee is thinking from every technical and logical aspect compared to chitubox

Very good video

TY for your very concise and helpful videos

Amazing! Thank you so much!

thanks a lot for the explanation :D

Very good video, thank you!

Thanks for this. I haven't used Lychee in a few months, and I was confused about the new auto bracing and etc.

This support system is amazing I've had sections of the supports on large prints come off but becouse the grid allows the supports to support each other allowing for the print to be susseful 🎉

Fantastic new feature and really good, clear video. I’m going to have to relearn my supports but that time investment looks like it’s going to pay off in faster supporting and reduced resin. Nice problem to have ;)

I'm super excited about the new features upcoming and can't wait to try all of them over the summer the only thing I'm bummed about is my Anycubic MS 5 pro is not on their, but I cannot change the resolution to my own profile will this also be in the future update.?

It would be good if the slicer could generate calibration prints for resin exposure times. The new additions are awesome. Keep up the good work!!!

You need to add an option for the height which bracings start eg. Above 10mm fir example, every support shorter than 10mm won’t get braced. Also an option to set the maximum bracing distance between supports. For example, supports that are far away could still get braced.

Fantastic intro to the new features. I can't wait to start using them!

when i try to right click, recalculate i get a software crush!!

This is extremely cool! Why did I not know of this? :D I'll support my stuff with this to experiment :O

interesting. I have a pro subscription and the grid support option is not shown

Feature request for second reinforcement, have an option to connect them as a triangle, for very tall and heavy object i like to make triangles to combat both x/y forces equally.

Finally.. won't need voxeldance then

great video, will be watching this again after i download the new lychee version! Continue le bon travail!

Very interesting! Merci beaucoup!

Very good tutorial. Learned a lot. Thanks

Very helpful. I just switched from Chitubox to Lychee so I'm trying to learn as much about Lychee's features as possible. Thanks!

Hi i have a figure that its in parts, buth its bigger than my plate, can i use uniform scaling and the parts gonna connect?

Bonjour ou plutôt bonne nuit car je vous écris de Thaïlande ou je vis. Il est donc 6 heures plus tard qu'en France

Bonjour et merci beaucoup de vos explications tres claires. Je suis un retraité qui débute en impression 3D pour mon hobby, les scenes miniatures au 1/12. J'ai besoin de beaucoup de conseils et votre tutorial va m'etre trés utiles. Je vous suis et vais imprimer mon premier poulet (le poulet de la video). Fingers crossed!

I have a pro m5s but it is not present in the software... how can I do? is so new that there is neither on the original software nor on care and not even on lychee

followed and liked! Just started with 3d printing and your videos are such a pleasure to watch and listen to. Thank you!

Thank you so much for making this video! You're explanation is very clear. I'm going to prepare my first model in Lychee soon and this video was super helpful.

without protective case...bad greetings

And you can choose a picture and take it

sall how can you make 2cm models

Great tutorial, thanks for the insights!

Love that you also angle 45 degrees the usb

Awesome tutorial! Thank you so much for making this!!!!

Excellent explanation of the software! !

very helpful

looking forward to seeing the channel grow Thomas. thanks very much.

Details are shallow as everyone is saying? Everyone seem to think M5 is better then M5S 'cause of the detailing.

👌 Promo'SM

Very nice tutorial, and model. Keep up the good work

Great info, Saturn 3 is on my list for next printer.

how much is this sold for?]

Your english i perfect..I think ..🤔😵‍💫🤣

very marvelous accent. !!! J'attends la mienne (en aout) J'ai pris un package kobra 2 / m5s. On verra ce que ça donne.

What pros and cons compared to Saturn 3 Ultra ? There is no review for features like fail print detection and diagnosis

I've designed some chian mail that is made to be printed as small as possible, originally I made the rings less than 3mm wide which is 4x smaller than anything I could find, and now I've got it to 60% that size 1.6mm, it's so close to mini scale but I don't think I can do much better on my saturn 1. Would love to see how much better these 12k printers can do something like this, let me know if you want to try it and I'll send you the files

Only person I know to use both this and the Athena 🤩

Is this self-levelling like the Mono M5s? It doesn't look like it, but if it's got a force sensor, it could be I assume.

Supports leave way more scarring and removal is a lot more difficult after curing. Print > IPA Wash > Remove Supports (Warm Water) > UV Cure