Video

@@lloydf8888 Yes, it's not recommended. However, I did anyway and it was perfectly fine. The TV is still fully functional without any issues other than the lack of additional HDMI ports.

And Hammer Drill.

I carried the Punch Down in the TP3. I miss being a Surveillance & Access Control Technician.

@@bernardgraf7187 It's not supposed to backup into the air box though.

@@ALTONBENALLY well you do have to maintain the system

@@bernardgraf7187 Correct, but I feel like your initial comment implies that that's a designed function with oil residue entering the air box.

@@ALTONBENALLY ohh no, just a consequence of not enough maintenance

This whole time I thought it was a MAF sensor. Cool, now I know. Thank you for the correction.

@@ph36061 I appreciate the comment. Make sure to swap that PCV valve out often. I traded that 18 Overland for a new L Summit Reserve. Same motor.

@@sacul7694I would stick to standing the TV upright in a truck. Unlike a truck, I feel like SUVs would offer more shock absorption in the cargo. I think as long as you drive carefully, avoiding bumps and avoid flexing the TV box you should be fine.

store.mopar.com/

You can reference the diagram photos to find your part. Then use the Part Number to find what you need.

@@ALTONBENALLY thank you for the fast response and hopefully this solve my issue

What's your current problem? Do you have a CEL? If it's the oil in the air filter, you'll want to look into installing a Oil Catch Can. Just be sure to find a good video. One guy installed it wrong and possibly messed up his 3.6 Penstastar.

@@ALTONBENALLY I have the same issue you having, oil on filter and sensor… any other videos you recommend that can solve the problem?. Are you still having the same issue ?

@@elatedbento the Victorinox is actually a much better quality. I personally prefer the design of the Wave to be specific, but this Victorinox Swiss Tool is better built. It's sturdy, smooth and has absolutely no wobble. The wave on the other hand has minor wobble in various areas. I still love the Wave.

​@@ALTONBENALLY thanks for the answer ❤

@@elatedbento If quality is what you're looking for then the Victorinox is your best bet. If you prefer features and a quicker access to tools, then the Wave is your choice.

Agreed. I just carried it around. I used to clip onto a scissor lift, boom lift basket and my utility cart.

@@angelagregory5306 I'm glad it helped! 2024... Nice!

Drill or Drivers were usually carried in a separate bag with the accessories. Tools in the video are ideal for "maintenance" opposed to "Installation". If I had to service a camera, I would carry the minimal tools required. If it were an installation then I'd be with a utility cart. I need to post an updated video.

Engineers are instructed to design it to where the customers HAVE to take their vehicles to the Certified Technicians. That's what I think. Everything is over-complicated and break-down too quickly. That's my assumption.

That's the idea, if you don't want to take it to the dealership for repairs then they want you to trade it in on a new vehicle.

Nope. Still using it today without issues. Only complaint is Samsung's slow OS. 😂

Go to the store with a measuring tape and measure the box first.

Agreed

I didn't fix it. Fortunately it was very minor. The only way to fix it would be to weld it which would require grinding off the paint, welding the gap and then repainting it. How far did you cut into it?

Not a structural fix, but bondo body filler is great for metal frames. Make sure there is no burr proud of the frame, apply bondo, and then sand smooth.

They can. Someone demonstrated it here on CZcams. It took some effort because he wasn't holding the snips correctly. Not sure if it damaged the shears, but it'll cut a penny.

They make these in 2 versions, one Carbon Steel (Klein Tools 21010-6 for example) and the other Stainless steel. If it was the Carbon steel, it would dull a bit but probably didn't take damage. The stainless steel, is softer,means it has higher chances to get damage on the edge. Thank you very much! I just wanted to know, if they have much cutting power for hard use,because they are kind of small! I'm ordering my first pair! (They cost double here in Europe!) Thanks again!@@ALTONBENALLY

@@greekveteran2715 What do you intend on cutting with it? They're great for networking cable and low voltage wire. Use the yellow side on your palm for leverage. Thanks for dropping by. 👍

I make handmade products, mostly accesories for men, but I don't need them mainly for that,but mostly as a heavy duty edc, to always have them in my bag. I'm very crafty with my hands, I always fix everybodys stuff! I had scissors, that couldn't go through tough materials or cables, these I bet they will! I'm smiling like a kid, (42 years old) lol, since you said they go through a peny! Thanks again! @@ALTONBENALLY

I make handmade accesories for men but mostly, I want the Klein Snips for edc, because I always fix stuff, either creating new, or fix anything broken around me! I'm going to order this Klein model, until Monday morning, if not tonight! @@ALTONBENALLY

I wouldn't know. The best thing to do is measure the cargo FLOOR then measure the TV box.

Don't be so sure. I have both and the Victorinox plier head comes loose!

I haven't come across any pumps with that feature. Where might we come across this?

@@ALTONBENALLY could just be in my commie state of WA. Chevron seems to have switched over entirely to them. Most shell’s havent. It’s a real pain in the ass that spills more gas than you ever would with the normal nozzle without the skirt. Kind of like the fuel cans nowadays that require you to push something or do something befire it spills gas all over your lawn mower.

@@Slippindisc Safety mechanism to prevent operators from abandoning their pumps. Yeah, that sounds like a pain. Especially if you're fueling up in the middle of a storm. I have not come across those yet here in AZ or in NM. I won't be surprised to see it standardized in the near future.

@@ALTONBENALLY I don’t know if it’s to prevent you from walking away from the pump, or if it’s to make some kind of seal and keep vapor from escaping. Either way it’s more of a pain in the ass and I promise I spill more gas when I’m tired of physically pushing the nozzle in and pull it out as soon as it stops pumping (I’m sure there’s a joke there). They worked fine before.

It was temporarily removed in the video. It's just one of those 250w mono Kicker amps. I have it screwed into the rear seat on the driver side. I drilled holes into the metal and used self tappers to mount the amp. I alternate between a 10" Kicker Comp (slim Kicker ported enclosure) and a 12" Kicker Comp (aftermarket ported enclosure). I have a bass knob so I can adjust the bass based on the type of music. I listen to mostly metal and it's enough for my needs. Depending on what you intend to listen to, your experience will differ. If you're new and a DIYer simply looking for an upgraded bass, just get a Kicker set. Try it out... sell it and get something better if it's not up to your liking.

@@ALTONBENALLY Awesome man! Thanks for the advice. I am new to this but I think it's relatively simple from all the videos such as yours I've watched. I think I will go for a 10 inch kicker I'm seeing from Best Buy currently on clearance going for $99. I think that should be enough for me at the moment.

@@babyjeff10 I recommend getting a 'ported' enclosure as well. It'll be punchier than a 'sealed' enclosure. Glad to help. Be sure to add a Kicker bass knob if you can.

I'll TRY to post something soon. In the mean time, feel free to describe and ask what tool is which or what.

The bag itself should be fine. It's just a giant rugged laptop bag

It's hard to say considering cost. For sure the tools are high quality and the packs/cases are well thought out. I personally enjoy using them and am glad I chose Wera. You'll be satisfied as long as you're willing to pay the premium. I requested these for work and they paid for them; not mine to keep, but I'm gonna be there for a long time.

That's awesome! It's a fun job. I'm no longer doing CCTV and Access Control. I'm now a Biomedical Medical Equipment Technician. I miss my old job sometimes.

No issues. My drive was 120+ miles. Road varied from smooth to terrible from NM to AZ. The TV also survived on a 2 mile dirt rural road too. SRT!? NICE!

How tall are you ? You mentioned you didn’t have to move the seat . Is your seat reclined at all? I’m 6’4

@@gnailsleerdam1547 I'm 5'9". Seat is slightly reclined. 65" should fit with your seat adjustment.

Using a carbide blade and not forcing it; you'd probably get five strikes done. Applying too much pressure will surely reduce the life. Using all parts of the blade will help too. Carbide is also better than the titanium blades. They're expensive, but worth it. I used the Dremel brand in the video.

Yes you will. I recommend getting an impact driver and a hammer drill. Sometimes you'll need to drill into concrete. Recommended bits: masonry, spades, auger, regular drill bits and hole saws. Definitely get the extra long bits too; maybe a 3/8 and 1/2

I don't have a video. It was in the works, but failed to complete it. I'm a actually no longer in that trade. I'm a Biomedical Equipment Technician now; completely different field of work. I don't mind answering any questions. It's been a year since I changed careers. I used to work in a casino as a surveillance technician. I CCTV with enterprise NVRs and access control.

Appreciate the thought out response! So i recently landed a federal contract job. Ill be performing more so quality control and preemptive maintenance. They mostly work with lenel. Is there any resources i could look into for training on AC controls, relays, etc. Also if you dont mind me asking, what made you change careers? Thanks again! @@ALTONBENALLY

@@jameelrashad Lenel... never heard of it. I looked it up and it appears they offer training. I dealt with Honeywell for video and access control and attended training multiple times in Vegas and once in Wisconsin. Go to the trainings if you can, the certificate will look good in your resume. I wouldn't know much of AC controls and their relays. I assume they'd be close to access control relays (security multiple door configuration). If the employer is willing to pay for training, I recommend attending Lenel & NFPA. NFPA has stuff about door controls. Just remember, the system can go offline, and these systems are supposed to function offline in the event of a power interruption. Learn everything you can about the basics first. Know where your servers are, if there are spare parts, power redundancy/backup and existing issues. I left because there was no potential for advancing in pay, plus I felt management was too comfortable and didn't care much for the hard workers. Everyone was treated the same; whether you worked hard or slacked off. This job is so much better and I know I'm going to retire well.

I used to just clipped it onto something like my utility cart or the basket of a scissor lift. Never hung it on a belt.

So far I have not had a problem doing this.

😂

That's true about the jumping around. A A full speed start at the cut is a must. Thinking about it now, clamping a scrap piece of wood to start the plunge cut would be very helpful. I no longer do access control.

@@ALTONBENALLY what do you do now?

@@flashmedia8953 Biomedical Equipment Technician (BMET)

@ALTONBENALLY it pays more right? I'm thinking about that

@@flashmedia8953 Yes, definitely higher pay. Give it a shot. Learn about medical equipment used in the clinics and hospitals.

Maybe if it were an old plasma. Normal driving conditions shouldn't cause enough vibrations to affect new modern TVs in a factory box. Unless you're speeding through speed bumps, then the box will bounce, causing the TV to possibly flex. As long as the cargo surface is evenly flat, nothing is under the TV, nothing heavy is on top and the driver isn't driving like a maniac, then I think they'll be okay. TV technology is far from vacuum tubes, CRTs, DLPs and plasmas.

@@ALTONBENALLY… Do you think a 77 lg cx will fit too?

Im a little scared tbh

@@Patrick-vv7cn the TV in the video is a 75", so the 77" will be larger and will require the TV to sit at an angle. Measure the box and reference this video to see if it'll fit. It could be riskier if the TV is at an angle.

The Makita would perform the best because of the higher voltage, but the price places it in a different category. I'm not sure about its impact function; i haven't watched any videos on it yet. The Panasonic is comparable to the Skil and Vessel in voltage, except its higher price tag. I personally like the Skil, but I also have not tried any of the others. I think the Vessel would be a close tie with the Skil. It would be the preferred screwdriver in a tool pouch for sure; it would fit much better than the Skil. The Panasonic has a good compact form factor as well, but the price is too much.