Video

My door isleaking

adding to my homeless project/ forpeople

Pl let me know Dealer in India , Bangalore

I like the general idea of the easy climber. It's like a midpoint between a luxury over the top elevator and a traditional lift. More cost than a lift but hands down cheaper than a traditional residential elevator. If I were to ever get a setup like this, personally I'd like the entrance and exit to have some sort of external enclosure around it. Would give it a more luxury feeling to it I would assume.

How much did it cost?

Very easy to assemble.

Are you using this elevator

That kite was our tent lol. The spout tail went right through me and my family.

*The product is excellent❖❖>**allmy.tips/AmericanWalkTub?Ww⊳** but be prepared for a lot of work to put it in, you need a good plumber and a good electrician, but directions were easy to understand..*

useless video you can't see nothing seriously

hi my friend ,i have one F27c striker,what motor flies; if put turnigy 2200KV & 3s 2200mah say fly ?? what motor recently NHS to put it ?? I have 12g servo well is; to own the contract to another motor you will now be put ?? MUST BE inrunner ?? and set-up to put it to be fast as yours,

Hmmm was there a train in the background ??? Ha ha ha

How about telling mr. "Don't do that shit again" to go inside and play with barbies while your flying next time. If your gonna be a baby then your not needed. I understand the inherent danger but you don't need some loud mouth yelling in your ear when your flying. Cant stand people like that. P.S. Great job and great flying. I want mine to break 160.

why not faster on 6s? with my f-27q i got 196km/h on stock motor, 60amp esc and graupner 6x6 prop with 4s, measured with the android app ''rcspeedo'' wich uses doppler sound

Killer plane! good flying on a windy day. Great Vid.

@brantwinter The balsa slock is aileron balsa stock available in most hobby shops, Trim the balsa stock to match the stock width of Stryker aileron. I trimmed the thick part off leaving a balsa aileron that is similar to the stock Stryker aileron.

wow

why is a 1400kv screaming like that?

I don't get it, why modify a striker like this just to get 150mph? Get a purpose built F5D pylon racer on 5S and break 200mph.

@tahoeskiier Stock Stryker Frame

Whats stock about it?

Doppler verified

Cool! is it 150mph on the GuessOmeter?

Highly modified is the fact the plane has a fiberglass covering and carbon fiber reinforcement in the wings and fuselage. 100 amp Speed control

what a very fast bird at 0.50 sec.

Balsa

@kellyd8561

Balsa stock aileron material from Mike's Hobby Shop. Covered with adhesive monocoat.

what did you construct the ailerons out of?

@toolbaggers not really man.. only thing upgraded was servos, motor and prop... if ya want to call that "highly modified".

I agree. the blue sky is pretty. Where is the plane? Only glimpses.

You didn't put cabon where you need it most...THE NOSE! You could take the carbon out that is running from tip to tip and install it in the nose, not really needed where you have it anyway.

3cell?

Wow !!! one of the best video of CZcams.... your stryker is visible for about 0.8 sec. on a 7 min. video, PS: try to make a friend to hold the camera, your next video will be better. I will put this one on my favorites. Thanks for sharing !!! ;)

fucking awsome!

@RonRiverRat yes servos were upgraded to hitec 85mg

Nice blue background but where is the Stryker?!!

What prop are you using? I am considering going 4s with a 3200kv motor and not sure on the propping.

SWEET!!!! :D

sweet!

if u go tpo fast wont like the wings rip off

Wow!!! very fast, thanks for sharing

omg... how do u controll it at 140? what servos u use?

Very nice, and fast , just finished mine running neu mtr on 6 cells 7x5 apc pulling 2000 watts had to glass body aswell the mk1 version blew apart at 140 mph lol. good luck.