Video

Did you replace the Clear lens covers or clean them?

Next time use a swivel socket extension. That will get the headlight out of there.

Definitely don't have to pull the motor for the rear cam chain and tensioner. Easiest and most stress free way to do the job is to just pull the cam girdle off (I guarantee you the bolt will strip), make sure motor is at tdc (via the front timing mark on the exhaust cam, put the gold link (on the timing chain) on the mark on the exhaust cam sprocket and count to the 18th and 19th link and mark and place on the indent on the intake cam. Reseal and reassemble and your golden. Definitely a more involved job that usually takes at least 6 hours and can easily go wrong for a newbie if you are rushing or don't have the right tools.

WELL DONE

Yeah man having the same issues... made me pull my RS4 PRV and then led me to the LPFP. I don't know why I didn't notice it before, but stopped hearing the LPFP charge. Just also watched your guide on the Controller. Luckily I got an R8 Controller to drive the JHM Pump upgrade. But never put the controller in and think my stock controller has finally failed.

Did you change your fprv to an rs4 one when going K04?

Bought a 08 Audi a4 6 speed, only code it has is p0171. Any first mods I should do now in 2024

I want the bodykit in the thumbnail; never seen that before. :(

What are those rims? 20 Inch?

have you ever had problems with the turbo ? code p0299 specifically and code p2004

Hi , what suspension u have on this B7 i love the fact that its even .

Just lowered my b7 sedan also the 2.0t s-line. Im gonna do this mod too, but planning on putting angel eyes aswell. I wanna get the spoiler you have but i live in europe so shipping and taxes makes the price like double :D.

What’s the boot lip called and the one above rear window 😍

What is the bracket called and the bolts used to screw the bracket in you repaired? My bumper is missing the same exact bracket and bolts for the left front driver side too.

Had the same issues as you with the deep Torx screw in the headlight assembly. The trick I think is to get a 12” Torx screwdriver (t30-Amazon). I got my bolt out in a few seconds. I feel your pain brother!

How did you re-seal the headlights? Did you scrape off the old liquid gasket and apply a new layer? If so what type? Where can it be purchased?

Je cherche le meme spoiler mais j’en trouve aucun avec des dimensions en 110cm 😢

Est-ce que tu aurais un lien de ton spoiler de coffre ? 😍

Hey, that pice of rubber came from your intake fuel hose. I had same problem, changed the hose, clean the pump. No more P0089

Hmmm im getting p0089 with zero symptoms. I changed the fuel filter and im doing the fuel pressure sensor now. Any insight?

Bro nice work. I would love a video on the adjustment/alignment of the camber with this setup.

If you run catless and put the elbow extension for the rear 02 you should pass emissions if you get it to work properly the whole reason of having it is to pass emissions it slows down the flow so the car thinks it has a cart on it in running CTS cattle's with the CTC elbow it works perfectly been over two years no problems

🐐

Tail light link plsssss

What silver did you use for the light plastics ?

Making me miss my b7 😭. Is the color brilliant black?

Focus 1.0 Hi mate i just managed to into live data fuel rail pressure is 1300 psi And also the fault code i am getting is p0089 Fuel rail oressure regulator 1 performance its says would that be the high pressure fuel rail sensor ? Maybe that sensor is gubbed Any idea mate ? thanks

where did you get the clear turning covers

do you still own this car? Does it burn oil or other issues?

Do I need to modify the cat with a KO4

window deflector plug ? all the ones i’ve seen are funky lookin

All you Gen Zs need to stop with MODS and start saving your money for true honest maintenance. I see it over and over again, mfkr will put thousands into dumb adjustable coil overs and wheels and low profile tires only to throw off all pre-engineered alignment tolerances just to start, and then want to junk it for parts when it could have been saved with very simple audi certified tech maintenance along with non-eth fuel and top of the line oil changes. But No, you wanna try to "drift" in a quattro using your 87 octane and then cut off the exhaust because you think it makes you a man. You are not german, you are not kewl, you will never understand. Go back to your moms honda civic cuz that's exactly where you're gonna end up anyway. Stay off the Audis. Unless you have the mature Top G balls to ACTUALLY own one for more than a year. Fools. Fools. Fools!

Looks great. Nice job

where did you get the quattro on the front bumper? :)

what type of head unit do you have?

beautiful

I see you got the Pcv block off plate too, lemme gess you car started choof smoke

Bro died

Why would you prefer the 1.8t my car is the 1.8 engine but i think the 2.0 is faster

Hello ✋🏻, i need your advise please. My ride is Audi A4 2006 2.0L ... I had a complete set of control arms replaced today (total 10pcs), and being aligned afterwards, but unfortunately i experienced a very stiff steering wheel. Any clue ?

Hi congratulations about the channel and the usefull videos just subscribed. I have an Audi A4 B7 2.0 TFSi SE manual. Sometimes when i press the clutch on low rpm in changing first to second gear the car dips/kicks. Furthermore when getting the cruise control in standby mode ie when you can set a speed it gets in safe mode and check engine comes up. When i set off cruise control and restart the car the codes clear. I changed the clutch switch with no luck. Codes refer to gas pedal problem. Changed that as well but problems started again within 2-3 days

and when I have the KO4 I'm going to go to the Dyno because in my opinion it's better to have a custom tune because it's the way to get more hp and it's also the easiest way

And when I have more $ and it's ready, I'll buy the CTS KO4 kit

I'm going to take a motoza stage one or a stage two right now I don't know which one to choose

Axle I stick to junk yard oem never try napa axles thought but AutoZone and advance axles total vibration!

Hey man i have a question maybe you can help me i have a 09 Seat Exeo 2.0T EA113 literally a A4 B7/B6 and my problem is that the engine vibrates in ldle i can feel it in the steering wheel, seats etc but not much just a little bit. Could the cause be bad engine mounts?

I just bout a 08 a4 didn’t even have it for a week and it went into limp mode😢 so now I gotta wait to take it to Audi to get it diagnosed

im having a issue with mine where once the engine warms up and the blow off valve engages (stopping at a light ext.) it will drop to 2lbs of boost until the engine cools back down Note: Already replaced the diverter valve and pcv valve

Thanks for sharing! I’ve been wanting to do this to my B7

I have a B7 A4 I’m upgrading on my channel