Video

I don’t have this equipment anymore shortly after making this video I gave everything to one of my clients that was interested in learning to tattoo sorry I couldn’t be of any help

Yes you’ll need the conversion grip to covert your machine to except pen cartridges

Yes the order matters if you want it sterile when your done the other probably didn’t know what he was doing

@@Tattoo4you awesome that's good to know, thanks a bunch. So cavicide then alcohol wipes?

@@asc3ndantone watch the hole video

Get some mast pro carts there as cheap as I’d go there good quality and have a huge selection and as far as the cam you can buy a new one from cnc’s website or look on eBay or Amazon and search for cnc q series cams www.ebay.com/itm/256034441012?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=dsjjCbzyRLu&sssrc=4429486&ssuid=fjgvGkfoRtS&var=&widget_ver=artemis&media=COPY

@@Tattoo4you thank you

@@Tattoo4you what stroke would you recommend for lining

4.0 for lining/color packing unless your doing huge back pieces and using giant needle groupings you don’t need to go about that

So the way strokes work the lower the cam stroke the softer it hits so if it’s a 2.5 or 3.0 it’s good for soft shading and color blends the higher the cam stroke the harder it hits so if it’s a 4.0-5.0 it’s good for lining and color packing also the bigger the cams it makes it easier to use larger needle groupings on average I’m running 14-18rl bug pins so I use my 4.0 cam stroke I can use the 3.5 but it won’t run as smooth and hit as hard so you’d have to go slower with the 3.5

@@Tattoo4you awsome honestly I used coil machines and this makes no sense but rotary machines are different but you explained it awsome thank you

It’s the same on a coil machine the stroke is how far the needle travels up and down so the longer the stroke the more energy builds up before hitting the skin so it’s hitting harder think of a rubber band have you ever put one between your index and thumb grabbed it with the other hand pulled back and slapped yourself or someone else if you don’t pull hard it doesn’t hurt much causing little trauma but if you pull back far it really hurts causing a lot of trauma that’s kinda how the stroke is on a tattoo machine bigger stroke harder hitting machine equals good liner and color packer smaller stroke equals good shader I hope this helps I know that’s a huge run on but I’m half a sleep here

@@Tattoo4you but that’s what is so confusing on a coil machine you would use a lowwww mm of travel to line so why on rotary do you go the opposite way and go for a bigger like 4.5mm stroke it makes no sense to me still like why would they be treated differently like I get the longer stroke the harder the hit, but what’s that have to do with anything we don’t even have a way to measure that hit we only have hertz and that’s confusing as well sorry I don’t get this at all how can a coil machine have way different rules than rotary and if so why can no one explain it gaha

I’m not the expert on coils I did run them for for a bit when I first started out never a fan myself and almost instantly switched to traditional rotary’s I do know with coils you can have larger and smaller coils depending on the wrap of the coils and thickness and length of springs the stroke could be different I guess but from my experience the strokes were roughly the same as pen style rotaries the only way I see you running a 2.5 stroke on a coil is if it had really beefy machine with think coils and springs again I’m no expert on coils sorry I couldn’t be more help

Which cam do you have in it I have 4 cnc Q-2’s and zero issues I run mine regularly at 10-11 volts it’s probably your battery

@@Tattoo4you reallly I have the 3.5mm cam and even the owners manual says not to go over 8 or 9 volts

@@Tattoo4you I’ll take a video of the manual I got and post it on CZcams one sec, it will be on my channel shortly

@@Tattoo4you ok I just posted it on my channel brotha

I under stander they say not to go over 8volts I run mine higher zero issues if your not comfortable with that go low and slow

The torped was trash didn’t work with any needle brands I had on hand and the higher the cam the harder the machine hits so better for lining and color packing

@@Tattoo4youbut why would the needle act so different on a coil machine vs rotary like could machine would be set up with a 2.5mm stroke so how can the rotary use 5mm is the way they measure it different or how can this be hahah

No it was junk don’t waist your money

@@Tattoo4you ok was it the motor

@@Tattoo4youwait why can you explain

You can use the same grip check out my video on sterilization you’d still need to sterilize your machine with a disposable grip also I wouldn’t second any mast machines they all require a Allen head to take them apart to properly clean and sterilize them I’d advise something like a cnc Q-2 where everything twist apart no tools required

@@Tattoo4you thanks for your help! Will this process of opening the machine and sterizing have to be done every time it is used for different customers, even with disposable grips?

Yes blood pathogens are no joke be safe give your self a hour when your first starting out to tear down and reset up once your get some tattooed under your belt if your proficient you can get it done in 30 minutes

Yes blood pathogens are no joke be safe give your self a hour when your first starting out to tear down and reset up once your get some tattooed under your belt if your proficient you can get it done in 30 minutes

It’s Bluetooth only

I made this video months ago price may have some down

Just Bluetooth

Well there’s multiple things you could do #1 make sure batteries are charged beforehand #2 have a second machine wrapped up ready to go if you plan on tattooing longer then your battery last #3 take a break take the machine to a clean area away from where your tattooing unwrap machine put new battery on and re wrap everything just make sure you watch my 3 step sterilization process

U can't change the battery on this mast archer tattoo machine unfortunately but it does last for about 8hrs on a full charge

Red when charging green when it’s done

@Tattoo4you cheers mate really appreciate it. Just got mine today and it blinks red and green when I put it on charge. It's a solid green light know though. Does yours go solid green when fully charged?

I haven’t really paid attention in awhile I’ll check mine out later on today I believe I need to charge mine anyway

Are you putting your paper in like I did in my full length video you aren’t you could have that issue and if you are you might need to send it back as you may have gotten a faulty one

Yes no issues at all

@@Tattoo4you nice 🙏🏼how much does it weight ?

I haven’t weighed it myself I’m going by what the site is saying 56g/1.97oz

I always use the thick settings so the stencil comes out more pronounced

Drop the link please!!

@@kiranjyotkaur6920 CZcams doesn't allow outside links. Temu

Yikes!!! mine was 98. Lol One of the best ones they have, though, usually 300.

@@JamieDiseker Yep. It was normally $300.

I don’t use glove or anything when playing with the ballpoint carts my machines get fully sterilized before and after I tattoo someone so just use your hands and sterilize after if your not sure how to do that check my video out on how to do so

I also have both along with the Zetton and Lutin. The Zetton is awesome bro! Although they do say it has battery problems but I haven’t had any but if I do I got other batteries I can use on it.

@@jrvega9559 I’ve got the torped the shura the soldier the mars-u and the hello 4.0 😂 love them all and haven’t had any issues with machines or batteries

I’m not running it they both got sent back there was no fixing the issues I had and I didn’t want new ones

@@Tattoo4you They were able to help me fix mine. Sorry it didn’t work out for you man. What machine are you using now? 🔥

For my fake skins I use cnc Q-2’s those are the best budget machines in my opinion as far as everyday and people I use my bishop power wands

Yes there great I just wish they had a larger selection

Just thermal paper

Re read the instructions

@@Tattoo4you it works now thanks. I only have iPhone and this printer. Is procreate the best for tattoo design?

If you have an I pad yes if now you can always hand draw it then take a picture to print it with the phomemo

@@Tattoo4youok and now my stencils won’t print very well

Adjust the filter to po3 or po4 then adjust the thickness to heavy different designs need different adjustments play around with it you get it

Yes I like it a lot but that’s definitely something to think about I never gave it much thought that the app might stop working one day

Mess with setting

Make sure u go to ur phones Bluetooth then when u go into the app after u hit 1 paper print and image then free exit I think them look up at the upper right corner hit the. Printer u should c a printer hit that then hit m08f and it should say connected. U should b good to go once u upload the pic then hit done bottom right then print bottom right.

You really should check out part 1 and 1/2 and part 2 absolute garbage

The Ambition Torped is badass! I also purchased 2. I’m gonna get the pink one cause that’s the last one I need.

@@Tattoo4youwait it was all bad ??

Yes pick your preference you can mirror images and pick how bold your stencil comes out check my full length video out

So don’t the video is really meant for people struggling to keep there outlines the longer you wait the better it stays while your tattooing you can always use a blow dryer or heat gun to speed up the process

A4 is standard printer paper size 8.3 x 11.7 inches width x height

normal world all use only A4.

Yes the app is needed