Video

It's not possible that your green metal post would be plumb if the deck slopes 1/8 inch per foot. How do you compensate for that? You did not cover it.

What happens when bugs build nests etc in the weep holes? Does the water flow over top or does it back up and weep through the deck?

where did you get the corner molding

You guys need better engagement and a better flashing solution.

I am ready to install a deck, and I understand I have to rip the first piece. However, what happens when I get to the other end and the rip is in the middle of the hollow? How does that work or what needs to be done then?

So what tooth saw blade are you using?

Most people in the North East use G Tape on the under the deck boards and the fascia as well. Water is the enemy especially when it freezes and expands..

So you get a gray corner or edge

3 screws every 12 inches is so they can sell more screws

Getting ready to do a deck with these and they are worries about the screw going in on the angle and cracking that end channel when it expanded and contracts, they want to use a different method of screwing. Any information on this?

3/16 and 3/16 is 3/8, not 3/4.

More closeups needed. Did you have color coded screws, you don’t say!

“America’s deck builder,” huh… at least you don’t give yourself a nickname based on delusions of grandeur. I’ll bet this dude’s never built a deck in his life. 🤣

Thanks. What's going to happen to the water trapped in the Duxxback decking?

Seems like the water is gonna run into the channel, hit that wood post and run down into the deck.

Safer to use a ball peen hammer...and som matching color elastic caulk at corner joints.

This video answers a question I've had for a while: if it's acceptable to install composite decking in a Chevron pattern with the joist at a 45 degree angle.

Show me a job 7 to 10 years old.

Why not hav ethe deck board run out 3/4 inches to cover the fascia ??

You have a double band on the middle,do you put any type of tape on top of the double band?

If u allow a space for contraction at but joints, why don't u do same at corner joints?

😀 3:05 "It's not my work... it's not perfect." That's what I say about the majority of projects I hire out to "professionals" and why I'm a DIYer. I can mess it up just as good.

How do you not get a rollback with water with a gutter? Any tips

“It’s not my work, it’s not perfect “. That’s confidence it yourself

Where can I find IDEkk HD tongue and groove? Grey driftwood color, deck planks.

Can you buy outside corners for composite fascia or if not how to build them?

So is it taboo to use 8in wide facia board on a 2x8 rim joist? I heard its usually 12 in wide.

could it be installed on metal joists? what if the joists do not have any sloping?

Dont you have to leave a gap at the miters for expansion? Hot sun is going to buckle those bad boys.

Any suggestion, how to do flashing on the brick wall?

Thank you

Nice job

Real wood doesn't buckle like the composite crap the millennials have foisted on us!!

An old video about a total garbage piece of product

In Canada we are looking at over $20 a sq. foot for this product.

$30 a square foot .... $30,000 for my deck .... seems a bit much

What is that thin fascia board? Cant find any that thin. Thanks

At 9:32 of the video you explain how to handle deck posts. Do you seal the groove all the way down for this plank or just near the post?

Nice video, what is the thickness of the fascia you are installing? I want to use white and everything I can find is 1" and this is going on an existing deck the thicker fascia is extending out further than the perimeter strip you mentioned. My concern is water and debris could get behind the thicker fascia. Thanks

Thanks

Do you mean to build a none-level deck surface with pitch of 1/8" per foot? It is a slope! How to comply with building code?

Do you predrill the fascia?

Gary is the best!

Price for 100 sqf roof deck

7:45, there's always using your hammer to gently tap the tip of the material together.

Great video. Would love to have someone like you installing our deck.

Great info. I'm installing fascia on my deck today so I rewatched this video.

with plans from the Stodoys, doing something like that was a pleasure.

Looks like Geodeck