- 43
- 541 408
Scott Tomlinson
Australia
Registrace 9. 06. 2006
Modular Drones. A Digital 3.5" Racing Drone.
DXF Files and design intentions linked here: Please READ the intentions doc and notes along side each part to ensure accurate fit and performance.
drive.google.com/drive/folders/1xeswDIGL430787MnUqxGmjrU1gipBGoR?usp=sharing
=====================================
This is the Pavlova 3.5 RACE modular concept. A lightweight HD FPV drone with a swappable DJI VTX. I wanted to create a drone that I could quick swap the DJI O3 air unit between crafts. I have a few different quads that I only use on occasion and otherwise just sit around. I figure if I could create a few different designs that all share a common O3 (One of more the expensive components) I could save a bit of coin and try out different things. This drone can be built to sub 250 grams.
This is a race style drone that uses the BetaFPV Pavo20 housing which allows the DJI O3 to be completely isolated from the frame (Both in vibration and grounding) leading to smooth recorded HD footage.
You could likely stretch the arms out to suit a 5 inch UL build. If there's a want for that let me know and I'll add the files. Commenting your thoughts doesn't go to waste. Thanks for watching.
Parts used on this drone:
Frame: Pavlova 3.5 RACE - See link above for frame files.
Motors: T-Motor Pacer 1804 3400kv
AIO: BetaFPV F722 35A V2
Video: DJI O3 Air Unit
RC Link: Radiomaster RP4TD ELRS
Props: Gemfan 3525
Radio: Radiomaster Boxer Max
drive.google.com/drive/folders/1xeswDIGL430787MnUqxGmjrU1gipBGoR?usp=sharing
=====================================
This is the Pavlova 3.5 RACE modular concept. A lightweight HD FPV drone with a swappable DJI VTX. I wanted to create a drone that I could quick swap the DJI O3 air unit between crafts. I have a few different quads that I only use on occasion and otherwise just sit around. I figure if I could create a few different designs that all share a common O3 (One of more the expensive components) I could save a bit of coin and try out different things. This drone can be built to sub 250 grams.
This is a race style drone that uses the BetaFPV Pavo20 housing which allows the DJI O3 to be completely isolated from the frame (Both in vibration and grounding) leading to smooth recorded HD footage.
You could likely stretch the arms out to suit a 5 inch UL build. If there's a want for that let me know and I'll add the files. Commenting your thoughts doesn't go to waste. Thanks for watching.
Parts used on this drone:
Frame: Pavlova 3.5 RACE - See link above for frame files.
Motors: T-Motor Pacer 1804 3400kv
AIO: BetaFPV F722 35A V2
Video: DJI O3 Air Unit
RC Link: Radiomaster RP4TD ELRS
Props: Gemfan 3525
Radio: Radiomaster Boxer Max
zhlédnutí: 1 397
Video
A NEW FPV Drone With A Twist - Pavlova 3.5
zhlédnutí 24KPřed měsícem
DXF Files and design intentions linked here: Please READ the intentions doc and notes along side each part to ensure accurate fit and performance. drive.google.com/drive/folders/1xSuZKFvcsSZNU4sZ510VO90DXoHcLYxG?usp=sharing This is the Pavlova 3.5 modular concept. A lightweight HD FPV drone with a swappable DJI VTX. I wanted to create a drone that I could quick swap the DJI O3 air unit between ...
The Future Of Drone Filming? Google Earth Studio ft. FPV
zhlédnutí 764Před 2 měsíci
is Google about to take our jobs? Well not exactly but future development of this great tool could be a huge aid to those in industry and creators alike. Imagine being able to plan and visualise flight paths without even sending up a craft. I love it. Shout out to Jason Moussa for the concept.
Cannonball Run Pt. 2 - Drone Edition
zhlédnutí 1,4KPřed rokem
Been a minute! Flight from a few weeks back I thought was worth a share. We don't get too many bando's here in Aus but there are plenty of Buildo's to throw a quad around in. Going to try post some more on instagram too - @scotty.tomlinson Drone used in this video: Frame: Custom 5 inch (DJI race quad) Motors: T-Motor MCK 1910kv 2207.5 Props: Gemfan MCK 51466 FC: Foxeer Mini F722 (20x20) ESC: Ai...
My High Speed Proximity Drone (Plus CNC Rundown)
zhlédnutí 9KPřed 3 lety
My High Speed Proximity Drone (Plus CNC Rundown)
Next Gen Race Drone? (Still flies for 30 mins!)
zhlédnutí 85KPřed 3 lety
Next Gen Race Drone? (Still flies for 30 mins!)
Spiderman: No way home. The Marvel inspired drone
zhlédnutí 6KPřed 3 lety
Spiderman: No way home. The Marvel inspired drone
55+ Min Long Range Drone (NEW T-Motor F2203.5)
zhlédnutí 313KPřed 3 lety
55 Min Long Range Drone (NEW T-Motor F2203.5)
Quick test of the custom DJI CineWhoop
zhlédnutí 1,7KPřed 3 lety
Quick test of the custom DJI CineWhoop
I wish I was a kid again. Playground FPV
zhlédnutí 604Před 4 lety
I wish I was a kid again. Playground FPV
Albert River Circuit Hike - Lamington National Park QLD
zhlédnutí 652Před 4 lety
Albert River Circuit Hike - Lamington National Park QLD
Hello, I want to order a frame like this and ship it to Vietnam, is it possible?
black opul with o3 anytime soon?
5 inch version yeah. Video Soon
Love this idea I'm having one cut rite now and was wondering if you had a link for the pavo pico canopy? I can't seem to find it online anywhere, just the one that hooks to the frame NO press nuts, any help would be greatly appreciated
It's the Pavo20 one not the pico. Here is the betafpv link - betafpv.com/collections/brushless-frame/products/pavo20-brushless-whoop-frame?variant=40240553558150
@ScottTomlinson thank u and thanks for your time I'm gonna put up a video on my page if u were curious when the time comes 🫡 thanks again
Hey @ScottTomlinson, I built this drone spec for spec, and love the way it flies with these motors but just ditched analog and went DJIO3, do you have a frame that you would recommend?
@PhilipSully I've got a 5 inch version with O3 as my next video. Might be of some interest 🤙won't be far off
@@ScottTomlinson and that's why we subscribe and follow, thank you sir, I'll be waiting!
Wall slap in Vol.6? :} solid run mate
Iloke it
That's a sick run.
Yes, would have to be the closest thing to flying like superman as you could get
What machine are you using to cut the graphite?
It's a custom CNC router I made. There's some details about it in my proximity drone actually.
I would love to have this frame how do you go about to getting it cut out of carbon fiber? I dnt see any measurements, or can you just make it whatever you want. Def interested want this frame if possible, thank you for sharing
Hey mate, the design files (DXF) are linked in the description. You just need to send them (along with the notes) to any business that does CNC milling/router. Places like CNC Madness or HobbyCarbon etc. Depends where you are located.
@ScottTomlinson thank you I appreciate that and thanks for sharing the files as well, very generous!
@ScottTomlinson so just another dumb newbie question all the measurements and everything I need to get these peices cut out are in the description files( dxf)?
@@burdfamfpv The DXF files retain all the correct measurements and profiles yes, exactly as they are and true to size. In the folder, each part has an image file (.jpg) with some notes attached. They need to be read by the machinist as they dictate the minor details like pocket depth and where the press nuts fit etc. Reach out if you need anything else.
It’s strange that you named it after a New Zealand desert.
I see what you did there! For real though, half Pavo and I love cake. Makes sense haha.
@@ScottTomlinson yeah, it does! It’s a great name.
Love this idea man
Damn this looks awesome! How much?
Files are downloadable man. Too many projects on the go to offer kits haha
@@ScottTomlinson let me know if wanna get rid of your prototypes 😅
Another banger design mate.
Cheers brother!
Still keen to see this.
love it. Are the CAD Files anyway to download. Looks far too awesome to not try out myself :D
Yeah in the description mate. Link to the files are there.
Many thx for inspiration Scott! I made my own version with commercially available frame czcams.com/video/6N-sGpOTO8A/video.html and I really like it. Now I can carry only two small drones and easily swap O3 unit on the field if needed. Now I can finally learn how to fly. Btw so far it holds well even with my poor free style attempts.
How to make a black dope like that, sir? Are you using sticker ?
That's just matt black spray paint my dude.
@@ScottTomlinson Thank you ,sir
very nice! can you shared the file?
Thanks mate. Link to the DXF files and notes are in the description.
@@ScottTomlinsonthanks mate! 😁
Great one
Amazing masterpiece 🤩 can cineape 25 be mutated with this Frame, and can this Frame o3 use walksnail Avatar hd pro?
It has different mounting for the O3
Wow I really thought this was a bigger channel. You deserve more subs!
Thanks mate
Wow!! love your idea man!! keep that coming!! good luck!!
The next fpv inovation is here "hot swap vtx". honestly this is the best idea. If bnf brands like flight or Geprc start using it, there could be an option to buy the drone with the "hot swap system". I think for this to really be used main stream it would have to be quick and easy, just sliding it onto rails that would be on the drone, and for the connector it could just be plugged in.
Great video, nice flying, awesome product. What type of CNC bit do you use to cut the Carbon fiber plates with?
Just diamond cut carbide burr end mills. Same as what's used for PCB milling etc.
@@ScottTomlinson Great, thank you. I have a bunch of different bits, was hoping not having to get some special carbon cutting bits :)
I love it!
Maaaan, I frickin love this concept! I'd like to build one too!
Amazing idea!
he-he, nice
Great job! Both for the O3 housing and for filming the whole process.
Can you share other details for this drone . I like it build similar this one😊
This was just a concept.
Bro I'm sold where I can get one. I loved the boomerang arms It reminds me of newbeedrone vivid and the antenna placement is the key. Make a TPU file for a self-powed buzzer
Thanks mate. Files are in the description.
how can the kangaroo not run
He's well trained haha
T_T can't like this video twice
Wow what a cool design and idea nice work !
This is so cool Scotty
Thanks man! Appreciate the comment.
Keep up thd good work...dr quads tried something like this but never got it quite worked out...cam you sell the soecs so i can get one cut?
DXF files are in the description mate. Just make sure you read the notes with it.
This you can call an innovative in FPV likely from the last 5 years , i like the way and the new concept ❤
Like the frame need the files👌👌✌
I thought this was a collab with Dr Quads.
I do all my own stunts
@@ScottTomlinsonI can tell
牛逼牛逼
Thanks
I haven’t gone digital yet, still rocking my HDO2’s. This concept might bring digital into my price range. Good one, mate. You are most definitely doing God’s work for us here.
and now where do we order? very nice work and intelligent design
It's open source. Files are in the description. Easier to get it cut locally to where you are.
That is such a good idea. I have been toying with the idea of putting an 03 air unit in a tpu mount but all the tpu mounts add a lot of weight. It would be on on my 7 inch quad and my 3 inch cinequad but a bit much for my old beta85x. However this idea is absolutely perfect. I think I will design a tpu mount to mount the shell to, to adipate it to suit my other drone. Awesome video 🔥🔥👌👌
👍👍👍
thats a awsome drone if there would be like a kit to buy i probably would buy it. its awsome to swap out the o3 unit so easy i really like that.
Please make concept upgrade for dji avata like this project
🔥🔥🔥 I need that too
Beautiful drone mate, i would love to be able to build a custom one day, and i know on what channel to look out for tips 😉
Love doin lines at the carpark... wait
Haha funny seeing this vid pop back up. Thanks for checking it out man.