- 158
- 3 972 707
Kelley's Garage
United States
Registrace 14. 01. 2015
Welcome to Kelley's Garage!
We're here to provide a source for car enthusiasts to gain the confidence to modify their own cars at home. Showing the good, bad and ugly sides of doing all the upgrades on my 2019 Dodge Challenger Hellcat Redeye so that you, too, can have a 8 second street car!
We're here to provide a source for car enthusiasts to gain the confidence to modify their own cars at home. Showing the good, bad and ugly sides of doing all the upgrades on my 2019 Dodge Challenger Hellcat Redeye so that you, too, can have a 8 second street car!
TBM brakes and Redeye weight savings
Unboxing my TBM brake kit for my 2019 Redeye. We will lose about 66 lbs total in the front.
MERCH: www.kelleysgarage.com/shop
INSTAGRAM: @kelleysgarage
FACEBOOK: kelleysgarageofficial
#dragrace #racing #redeye #orlandospeedworld #tbm #hellcat #kelleysgarage
MERCH: www.kelleysgarage.com/shop
INSTAGRAM: @kelleysgarage
FACEBOOK: kelleysgarageofficial
#dragrace #racing #redeye #orlandospeedworld #tbm #hellcat #kelleysgarage
zhlédnutí: 332
Video
Private rental testing the Whipple 3.0 & Pure Stage 2 Transmission
zhlédnutí 844Před 6 měsíci
Private rental testing the Whipple 3.0 & Pure Stage 2 Transmission
I gave him the jump and then chased him down!!!
zhlédnutí 2,3KPřed 7 měsíci
Roll Race with Chris Mimikos @ThatRacingChannel Night Meet - @OrlandoSpeedWorld #thatracingchannel #kelleysgarage #srt4 #rollrace #orlandospeedworld
That Racing Channel Night Meet at OSW - Finally pulled the chute!!!
zhlédnutí 166Před 7 měsíci
@ThatRacingChannel Night Meet at @OrlandoSpeedWorld on Februrary 3, 2024 First track event since getting the car back! We left the Nitrous bottles at home. First time down the track was a roll race with Chris Mimikos in his SRT4. The two final runs were an attempt at launching, but the car died on me both times. The car wasn't liking the wheel spin, but hooked up hard on the second pass. It w...
Sick Week! Final day at Orlando Speed World 2024
zhlédnutí 165Před 7 měsíci
Sick Week! Final day at Orlando Speed World 2024
Kelley's Garage Cage Update by Redeye Racecars - Part 5
zhlédnutí 305Před rokem
Kelley's Garage Cage Update by Redeye Racecars - Part 5
Kelley's Garage Cage Build by Redeye Racecars - Part 4
zhlédnutí 239Před rokem
Kelley's Garage Cage Build by Redeye Racecars - Part 4
Kelley's Garage Cage Build by Redeye Racecars - Part 3
zhlédnutí 389Před rokem
Kelley's Garage Cage Build by Redeye Racecars - Part 3
Kelley's Garage Cage Build by Redeye Racecars - Part 2
zhlédnutí 483Před rokem
Kelley's Garage Cage Build by Redeye Racecars - Part 2
Kelley's Garage Cage Build by Redeye Racecars
zhlédnutí 522Před rokem
Kelley's Garage Cage Build by Redeye Racecars
Overkill Performance Expansion Tank - Unboxing
zhlédnutí 422Před rokem
Overkill Performance Expansion Tank - Unboxing
Brand new Whipple 3.0 runs 8 second pass!!!
zhlédnutí 4,5KPřed rokem
Brand new Whipple 3.0 runs 8 second pass!!!
Adjustable Anti-Slip Idler Pulley Installation
zhlédnutí 1,1KPřed rokem
Adjustable Anti-Slip Idler Pulley Installation
Forced Induction Interchillers - Thermal Blanket
zhlédnutí 375Před rokem
Forced Induction Interchillers - Thermal Blanket
Whipple 3.0 Installation & Start Up on Hellcat Redeye
zhlédnutí 13KPřed rokem
Whipple 3.0 Installation & Start Up on Hellcat Redeye
Installing Redhorse Fittings and AN Lines
zhlédnutí 941Před rokem
Installing Redhorse Fittings and AN Lines
Whipple 3.0 MAP Sensor Bolt Relocation - Fitment Issues
zhlédnutí 710Před rokem
Whipple 3.0 MAP Sensor Bolt Relocation - Fitment Issues
BMW 535i Comfort Access Door Handle Replacement
zhlédnutí 6KPřed rokem
BMW 535i Comfort Access Door Handle Replacement
Whipple 3.0 - TPS Motorsports - Part 2
zhlédnutí 635Před 2 lety
Whipple 3.0 - TPS Motorsports - Part 2
Gearhead Anchor Kit + RJS Parachute Installation
zhlédnutí 2,1KPřed 2 lety
Gearhead Anchor Kit RJS Parachute Installation
Unboxing my Gearhead Anchor Kit + RJS Parachute!!
zhlédnutí 601Před 2 lety
Unboxing my Gearhead Anchor Kit RJS Parachute!!
Windshield Washer Fluid Reservoir Removal on a Challenger
zhlédnutí 7KPřed 2 lety
Windshield Washer Fluid Reservoir Removal on a Challenger
Orlando Speed World - Whoop Azz Wednesday March 2, 2022
zhlédnutí 1KPřed 2 lety
Orlando Speed World - Whoop Azz Wednesday March 2, 2022
The best way is to field strip it and install it on the top of the slide while on a flat even surface
Plaid was sleeping on the start.
I know its been a couple of years but do you happen to remember how much refrigerant you put in? 3 cans?? I just put an IC Chiller on buddy's car but can not seem to get it super cold.
The FI interchiller requires 4 cans. I'm not sure what the IC system takes.
@@KelleysGarageOfficial they said 28oz but it stopped taking it in after about 24. I think I’m going to redo it and keep it on max ac so the fan stays on. I always thought the recirc button was max until just few days ago lol
Yeah, I would follow their recommendation. Those guys know what they're talking about.
How did you find out that was the issue ? So I can try to figure out if that’s the same issue with me because I’m having a rattle whenever I cold start and whenever I step on it too you can hear a leak
Are you still running the American racing headers and if so how are they
Yes they're still on the car. One of the best sound pitch when it comes to headers imo
Does the stock redeye intake hose fit the 108mm throttle body?
It's a bit tricky but you can make it work. I ran the stock intake tube for years until I got the Whipple.
It's all about timing and shifting You can not win a race with automatic transmission.
What's the stuff on the Q-tip you're putting in the connectors?
PAG oil
RIP Patrice, funniest philosopher ever
Don't even understand why these bozos come to the strip. We get it, you bought a super quick golf cart. You've done nothing to it ta make it YOUR car. In fact, they can completely disable "your" car with the push of a button. Nobody is impressed, people would rather watch two 19 second shitboxes that someone BUILT putter down the track than watch a Tesla. Drag racing is about who BUILT the faster ride. That, along with the driver's reaction time/skill are what make drag racing so fucking cool.
What cold air intake system are you running for the Whipple?
The one that comes with the stage 2 Whipple kit
A TRUE MECHANICAL GUYS USES JACK STANDS
Hahaha, I love it when someone in a modified car with a huge power adder "nitrous" races a completely stock car driven by an idiot who is absolutely asleep on the tree, then when they win they claim the other car is slow. No stupid, the other driver is slow. The plaid consistently runs in the 9.2's with a good driver. Some "modified" plaid's with only weight reduction run in the 8.9's. I will admit that your heavily modified Redeye runs a respectable number but you shouldn't be disingenuous and claim the Plaid is slower, granted the Plaid driver is definitely slower.
Definitely loosen the top *before* you drain the fluid in case your top plug sticks/breaks and you can't refill the unit. That or, the Royal Purple is great, too. Their MAX ATF is the best thing for your transmission (auto & manual) that you can add. Really smooths out the "notchies." I'd put some *orange* thread locker (much stronger than blue but easy to break loose) on the drain plugs and let them sit while the fluid is draining, just to help against vibrating loose (that's what the factory does). And it's *2.3 pints* or right about *37ozs* or 1 quart plus 5ozs (technically 4.8) of fluid capacity for a dry fill. If the vehicle is level and the fluid is just dribbling out, that's full. Don't try and put too much in or you can damage seals, especially in the transmission which is filled the same way.
So i have speakers where the rear window is. The kit would block them wouldnt it?
There's already a panel that sits over them. This kit just exchanges the existing panel.
@@KelleysGarageOfficial yes but the panel that i have factory has the slits in it. Does the kit have them?
I'm not sure. It's been a few years since installing the delete kit.
@@KelleysGarageOfficial sound change any?
@thekingsmen4631 my car doesn't have speakers anymore lol
Them revs sound like me after taco bell
Will this help with one piece driveshaft vibrations
Do you think this will be able to keep up with 20-30 minute circuit racing sessions
No idea. It will help the system recover faster. Not sure how it will do under extended circumstances.
You need to put stock on that too.
Yeah that pro-tree is really confusing green=go. Let me study up on that and see if I can figure it out.
Ok, sooooo a supercharged, nitrous-based Red Eye, given a massive head start, is what it takes to beat a Tesla? This is drag racing??😂 This is so laughable. It’s like you know you’ll never beat a Tesla in a stock race evened up. So you slap on extra power and let it start first off the line. And if it wins, everyone thinks that the Red Eye is a faster car! Drag racing is becoming sissified!
i have so many questions im doing an install on mine now and your videos have helped me in so many ways
Thank you for watching! I'm glad the video has helped you. I'm here if you have any questions.
Tesla fans : YARGHHH AGHRRR😡😡😡😡😡
Anything fail yet?
Negative
Has anyone experienced this problem with an aftermarket exhaust system or does this only occur with the stock exhaust system?
Only the stock exhaust from my experience
The sound you can never replace
That was an ill-timed launch. Real judges would throw it out
Wow ignorance is bliss, clearly a race prepped car on Nitrous running against a bone stock 4 door sedan. And the ONLy reason it won was because the Tesla driver clearly did not know how to start.
The plot twist here: you cant mod a tesla, you can only rice it and give a new computer, otherwise, it would need new engines/batteries.
@@f-15TheFkingEagle lol, its a cheesey little family sedan that will blow away every supercar out there.............lolol what do you need to mod????? And BTW guys are making them lighter by taking out the seats, spare, etc they are running 8s with a family sedan. Look I was a HUGE skeptic until I took 6 full tilt 1/4 mile passes in my freinds new plaid.......holy smoke 9,6s at over 150 MPH.......the freatking car will pull 1.2 Gs off the line............it is amazing.
@@davidthayer6969 "will blow away every super car there" "why you need to mod?" Simple, because there is always something faster and that getting *your* hands dirty to make *your* car faster is always fun. Btw i dont find electric cars boring, i just found all of that '0-60' a little messy, bcs ICE still better on that, and a model s plaid still turning like a freaking boat, no shit why it got a slower time than another family sedan (JAGUAR XE SV PROJECT 8) EVEN WITH THAT AMOUNT OF POWER.
@@davidthayer6969 want to talk about crazy shit electric cars and not boats? Talk about ford supervan or speirling fan car
Thanks Chris, bmr cradle lockouts installed. Would like to say I had a great time, but it was only fun. Getting the cradle to line up again took the great time out of its now waiting on the 4" aluminum drive line from dss. July 5 th hopefully this is the last drive line.
Thank you for watching! Don't forget to get an alignment. Glad the video helped you. Good luck with your build🤘
The cradle bolt are torked to 120 pounds is that it ? What's the 160
@@allent208-kf4hv move up in 10ft-lb increments in rotation up to 160 ft-lbs. That will ensure the cradle won't come loose and allows for proper thread stretch on the cradle bolts.
Isn't the alignment shop just gonna in do them? To align the cradle on a wheel alignment
@allent208-kf4hv the alignment shop shouldn't touch the cradle bolts if that's what you're asking.
I see the Redeye made the pass in just over 9 seconds. I own a Redeye and it is about a 10.5 second car consistently. Even my car would have beaten that plaid. The excuse that it was 46% charged??? If you want to race you better be ready to run PERIOD. First rule of racing, be ready to RUN.
Is this better than the stock
Yes
Only mod was whipple?? Who tuned it and what whp?
Not sure hp as the car hasn't been on a dyno. Whipple only this pass
Tesla driver lagged , there is no way a hellcat would beat a plaid no matter how much modified . Gas is slow as fukkk
I'm going to do mine this Thursday because I'm putting in a aluminum after market drive shaft and they require a cradle lock out for warranty. I habe a dumb question! Is the jack supporting the rear differential to lower the cradle!
Correct. You don't want to completely drop the cradle. That way you don't have to remove the driveshaft and exhaust. Unless your plan is to do it all at once.
I had to get the drive line out and back to autozone. Never getting a Dorman again 60 miles
No replacement for displacement.
Best hellcat launch ever.
I’ve seen hundreds of Tesla blade launches and that was not a plaid. Also, if you watch the cat, it doesn’t lift the tires and it doesn’t have wheelie bars. So I’m pretty sure that was a bogus race.
Nice challenger… it’s got a lot of help… sticky track, sticky tires, nox… it’s definitely fast. But over 90% of drag racing happens on the street… a Tesla plaid will stomp that cat in the street. The cat needs all those assistive devices just to beat a stock Tesla… and the Tesla is a daily driver…
Lol ultra modded nitrous powered monster vs stock Plaid. Ok you win but what if you modded the Tesla?
Explain to me how you can mod a Tesla haha Still wouldn't belong on a drag strip🤷
Chris, did you replace the hard line that ran under the heat exchanger for a larger diameter hose? Thx
All of the lines are -12AN
So is it a Redeye or Demon make up your mind mate 😂
So is it a Redeye or Demon make up your mind 😂
i have a white redeye wb and you're making it hard to leave it as it sits currently lol
Doooo it!
Lol, dude needs drag radials, nitrous, and bolt ons to even compete with a stock car
Never saw him never knew he was there
Installed mine today with no issues. Really opened up my exhaust. Sounds awesome. Thanks for the video.
Awesome! Glad the video was helpful🤙
Watched this after wondering why it took an hour for my complimentary oil change, now i see why
That ain’t a redeye or demon that’s the devil 😈
😈😈
NEWBIE on the HELLCAT stuff,,So what advantages does this do for us !!??
It keeps the exhaust valves open.
Tesla sucks
no they dont