Video

No they do not. Some you are able to program yourself and others you have to have a professional do it. You can look up your car here and it will tell you if you can do it yourself or if you need to take it in. www.keylessentryremotefob.com/programming-instructions/

Happy we could help! Like and subscribe for more helpful videos.

Happy we could help! Like and subscribe for more helpful videos.

Thanks for sharing!

Happy we could help! Like and subscribe for more great videos.

Happy we could help! Like and subscribe for more helpful videos.

Thanks for sharing that tip.

Thanks for sharing that tip.

Yes, it should stay programmed.

The 2006 Ion has to be programmed by a professional. We recommend taking it to a automotive locksmith.

The 2003 Ion has to be programmed by a professional. We recommend taking it to a automotive locksmith.

Happy we could help! Like and subscribe for more helpful videos.

Most cars have several different key fob types for each year, it sounds like you have one of the other types of key fobs.

Yes, changing the battery is the same.

Happy we could help! Like and subscribe for more great videos.

Happy we could help!

The 2015 has three different key types, unfortunately it does not look like we have videos for the other key types.

Happy we could help! Like and subscribe for more helpful videos.

Happy we could help! Like and subscribe for more helpful videos.

@@KeyFobsPlus Most definitely, will do 🙏🏿

@@KeyFobsPlus just subscribed 🙏🏿

Make sure that you have the battery going the correct way. If that doesn't work try disconnecting the car battery for a few minutes and reconnecting, that has worked for others in the past. If that still doesn't work, you might need to replace it.

O no! Hope you are ok and were able to get the battery out.

If the key was programmed to the car, you do not need to reprogram it if you change the battery. If its still not working the key might be dead or it wasn't actually programmed.

Hello, the directions below should work for this remote. Obtain all remote transmitters for this vehicle. This procedure will erase all previously programmed remotes. You must program all existing and new remotes that you wish to use on the vehicle at this time. 1. Close all doors, insert key into ignition - do not turn it. 2. Hold the UNLOCK button on the diver's side door - DO NOT RELEASE until instructed to do so in step 4. 3. Quickly turn ignition ON, OFF, ON, OFF. (Do not start the car, ON is the position just before starting and OFF is where you can remove the key) 4. RELEASE the UNLOCK button. The locks will now cycle from lock to unlock signaling the vehicle has entered programming mode. ***If the locks cycle before you release the unlock button, the programming will not work and your vehicle is not in programming mode - Repeat from step 1. If the locks continue to cycle before releasing, the procedure is not being followed correctly or something is malfunctioning with the vehicle's keyless entry system. 5. Push and hold the LOCK and UNLOCK buttons at the same time on the first remote you wish to program. Hold the buttons down together until the vehicle responds by cycling the door locks (you may have to hold the buttons down for up to 5 minutes when programming a new remote - previously paired remotes will pair more quickly). Repeat step 5 for any additional or existing remotes that you wish to program and use on the vehicle at this time. 6. Turn the key to the ON position, which exits programming mode. Programming is now complete. Test all remotes.

No, you should not have to reprogram it.

🤣🤣

Happy we could help! Like and subscribe for more helpful videos.

If your key looks the same then you should be good to go.

Happy we could help! Like and subscribe for more helpful videos.