Video

Tengo la lavadora con error F03 y E01 pero se quedó la puerta trabada y con ropa adentro, alguien que me diga como la destrabar para sacar la ropa por favor, gracias

I have the same error and clean everything and still not working, and i noticed out the drain pump no power. Please help!

Not the best video definitely should have removed the the front boot spring super easy to reinstall

I take the back off and it's way easier. Set a little Tupperware under the drain plug and reach in and turn it out. Clean it, reinstall plug and put the back panel in place, 5 minutes total.

Excellent coaching!

Take off the little sticker by the lid hole

It’s helped so much

Good video length and instructions on how to respond to negative Google reviews. Two actions are to either respond honestly to the comments or to report to Google. Thanks for this tip!

Thanks all I needed to know 😊

Is that tyson

great video, and I'll definitely check out google speed check. Thanks!

Who is the engineer IDIOT that designed this machine!!!!!!!!!!!!!!

Have questions about mobile responsive design or conversion optimization? Let's talk! 👆

Thank you got mine going. Repairman said new pump and filter assembly 500. I said how much for your time

If you have any questions, leave them here and we'll get to them ASAP. Thanks! PROGRESS EVERY DAY!

That did not look like a mask to me it looks like some sort of a rubber😂😂😂😂😂😂😂😂😂😂😂😂

These are hands down the worst washer and dryer combo 🤦🏻

PROTIP!!! The fastest way to get access to the filter is through the bottom panel, 4 screws. Quick version: pull away from wall, tilt back, remove bottom panel, remove & clear filter. Keep small bucket handy underneath as youll be draining a fair amount of water. Detailed: Pull the washer about 1.5-2 feet from the wall, use the door and front facing top edge of the washer to tip it back against the wall. It should rest on its own at about 45 degrees and if it doesn't just pull it away from the wall a bit more. Remove the 4ish screws. Unless you like cleaning alot of water up, have a short bucket or large bowl handy because this error always pops up with it full. Place your container under the filter and loosen it, opening or closing as needed to drain. Once no more liquids come out, pull the filter out, clean as needed, and screw it back in. It is a firm stop and you can't strip the threads. Optional: with the filter out, carefully tip the washer back towards you to continue further draining. The machines are finnicky, you may need this, you may not. Also optional: reinstall the bottom panel. Tip it down, push it back, plug it in. Should be problem free, quite a bit faster. Nothing against the video creator, I'm just lazy and need to do this easily twice a month.

fixed!! TY!

great video and see my comment below on post @zapzilla4135 1 year ago (edited)

So that’s where my socks go…

God bless you.. Thanks so much!!!!

Whirlpool is so dumb for not making that accessible through the front like other brands. Mine is on the side also no access.

I'm sure s service bulletin was sent out on this..... NOT!

Have comments or need help with images on your website? Leave a comment and we'll help.

If you have a shop vacuum, you can pull off the drain hose from the back of the washer and suck out the water by sticking the shop vac hose on the drain connection of the washer. You could leave the drain hose on and suck it out through the drain hose instead, I suppose. It saved a big mess on the floor. I have a similar model, but the drain filter opening is sideways in the middle of the washer. So, it's easier for me to take the back off to access the drain filter.

Thanks so much I have the same machine and the filter was full of 10yrs of dog hair! Works great now and no codes 👍

Thank you!

cleaning that use to work for me, however its clean and still has issues.

Just repaired mine using your instructions. Was about to pay 2K for a new set and the thought of buying NEW but lesser quality machines (they just don't make em like they used to) was making me nauseous. Took a little elbow grease but I got the job done and saved a ton of money. Thanks for sharing how to do this!

yet more damage caused by Covid lockdowns, it never ends

Such a lifesaver! The different names of the items on mailchimp vs godaddy was so confusing. Thank you!

Michelle read for my mother. It was beautiful and helped my mother many months later as circumstances played out. Her energy is incredible.

Great Video thanks - What software are you using to do this tutorial?

My only problem is the dryer is stacked on top! Looks like I can't buy you a refreshment!😂

Have you ever had an issue with the unit not starting a cycle ? The machine will turn on but when i press start to begin a cycle it just beeps. The door is fully shut

I have another hosting service. When I tried it than GoDaddy said we can not shows DNS because you have another name server. How I can do it?

Thanks for posting this! My Maytag front loading washer (~2016) door was locked due to the same error (F9 E1), and your washer was similar enough to mine that I was able to get to and clean out my front-bottom filter, too. Mine does not have the bottom storage cabinet though, so I let the water escape from the filter housing and through holes in the washer base - and go into my floor drain. Without that, I'd probably have found a helper, some cinder blocks and a bucket to put underneath. I used a T20 torx bit, 1/4" and 5/16" drivers, drill and extension bit, and my headlamp. Works great now - I can get a few more years out of it.

Thank you so much!

Thank you so much for this, very informative instruction

Super helpful, thanks!

If you have any questions, leave them below 👇 and we'll do our best to help.

Thank you so much! I’m a single mom and after watching your video, I was able to fix the washer! You saved me a service call charge! You’re awesome!!!

Thank you for making this video. I have a little different washer wfw97hedu and my filter was actually in the middle of the unit. After finding this I figured out I could take off the back panel of about (11) 1/4" screws and 4 white plastic pieces that hold the panel more secure and could access the filter very easily. Found 3 kids socks in filter and so far so good on it working now. Thanks again

We are two 62 year-old women with chronic health problems… bad knees, bad back, thyroid cancer, etc. Your video was wonderful!!! We were able to fix the problem. PS What do we do with the four extra screws? Just kidding ha ha ha.

You da man! Plenty of videos out there but yours shows a fix with that filter in the front. I didnt need to remove that top front panel like you did. I simply had 3 screws in that bottom piece at the bottom of the panel. My filter was full of coins and nails. Thanks!

I’ve read that Orbi are sensitive to power fluctuations and short glitches. Buying a cheap UPS to plug your modem, Orbi and switch may help a lot.

So I was getting the error and followed your instructions and the filter was very clogged I cleaned it out and put all the screws back in and I went to run a cycle to check it now it locks the door and starts to Make a short buzz sound over n over it doesn’t spin or sense and pauses on its own but doesn’t unlock the door I found another video to take the top back off same way u did and pull a little circle to unlock the door but it’s doing the same buzzing thing I need help

I did this and still dont want to drain my washer so i assume it could be drain pump??? also have 2 more codes with it F6 E1 and F5 E1 what you think about it???

It's called a coin trap. Not a filter.