Video

@@JamesErrLJones i used a dab of glue

@@RCManiacs Thanks so much!!

Just watched and subbed, really nice bro 👍🏼

@@RCManiacs these little guys rock!

Man that sucks! Maybe go with s 370?

I do recall reading some stuff about this problem in the official facebook group. Cant remember the cause or the solution though, If you are on facebook you might find the answer in that group :) I hope you find a fix 👍🏼

I found this in an old post in that group, might help a little: ”Tonight I finally had some time to tinker with the C74! So, many of you know that WPL RC has released the gorgeous Bay Blue C74 for sale on the store and it has lots of great updates that the community has helped address no doubt. Those of you that have a release day C74 like me that may need a little bit of TLC I have another mod that I’ve done that is totally free. Just requires a bit of time and patience and in my particular case- a soldering iron (but you shouldn’t need that!) So first thing I did previously was install the aluminum knuckles onto the front plastic axle. It definitely improved smoothness in that whole area and in my case helped the axle binding I had too. Tonight, I worked on the driveshaft issues that WPL has addressed with the new blue version. All you need to do is remove the axles from the rear and front of the vehicle and flip them around. The angle of the driveshafts will basically be reduced from the transfer case. This results in less binding, and smoother power delivery. The only thing you will need to do- (do this at your own risk, but if you know anything about polarity you’ll be fine) is swap the positive and negative pins on the motor tab that goes into the receiver. The motor output has no particular polarity so you will not fry your board- again do this at your own risk, but mine was perfectly fine and I’m willing to bet this is what WPL did as well on their updated C74. The reason for this is by flipping the axles you’re also changing the direction of each of the driveshafts. You’ll still have full power forward and reduced power reverse on your reciever board so not to worry, it all works as it should.”

@@RCManiacs thank you so much for finding this and responding, I really appreciate it. I had to flip the rear axle when I installed them based on the position the stock axles were in, but the front wheels went forward and the rear wheels went in reverse. So I flipped the rear axle to get them moving in the same direction. I'm gonna take a look at the front axle and see about flipping it, and maybe the rear back to the way it was. In any event,thank you very much again.

@@mattp_505 sure is! I am keeping mine stock :)

@@MCsCreations Thank you and Thanks for your support 🙏🏻

@@RCTeamAustria 🤙🏻

Thanks man 🤙🏻

Thank you!

Have a look here: www.wpl-rc.com/collections/metal-upgrade?ref=rcmaniacs I would start with metal drive shafts, then gearbox/ electronics and lastly axles

@@manubahiacadiz I’ve seen some people try it but i dont think its recommended

@@RCManiacs Would it burn ?

It might, i dont know since I havent tried

🤙🏻

Yeah, they look great together! That would be awesome 🔥

Yeah, this is really cheap! Thanks for watching!

Yeah, that would be awesome!

Yes 🔥

The CXD cars are very affordable :) And drives great 👍🏼

WPL/CXD stuff is always cheap

WPL uses the same axle on all of their models except the D6x which comes with an open diff but the axle is still the same measurements

Its a beautiful driving model :) Looks great on my shelf. Thanks for your support 🙏🏻

Yes 👍🏼

I havent seen a SCX chassi irl tbh, So i cant answer that :)

Thank You 🙏🏻

I said that its perfect for kids or inexperienced drivers. Also said that you should look at something else if you are a more experienced driver. Another thing to consider is that this only cost 45-50 usd when I got it, completely different price point than the WLtoys.

Thanks!

Yeah, I want one. It looks pretty sweet

It is a lot of fun! Been driving it quite a lot actually. Fitted some rally tires on mine as well, super fun on some fine gravel

@@BenGodfrey-js4gg actually dont remember :)

I dont remember tbh

@@singhffgamer0001 No, its not recommended to do like I did in this video. But I wanted to test the limits and they still work fine but as I said. Its not recommended and do it at your own risk etc

I’ve never tried the MN82 or seen it IRL so I dont know tbh :)

Check the description 👍🏼

@@afrog2666 def one of the best WLtoys 👌🏻

Its just so weird and fun!

The C64 is a bit more capable because of its superior suspension flex and drag brake but the c24 is still a solid choice if you prefer that look

You are completely right my friend :) For me, this is not a car that is ment to be driven slowly in grass or climbing stuff so I’ve not experienced cogging in that way :) I will take your opinion in consideration and mention those downsides the next time I discuss brushless cars 👍🏼

Thanks! I am sure that you are going to like the E1! Great little RC!

That sucks :/ Did the motor burn out?

@@RCManiacs the gears kept on stripping, causing the moto to spin but the wheels did not. Didn't want to try fixing so I just ordered a new gearbox and motor.

Yeah, that would have sucked big time! This is def a shelf Queen that deserves to be used carefully, its just so beautiful to look at 😍

Thanks!

Nice

Exactly!

I am using the SkyRC GSM020 performance analyzer which connects to your phone via bluetooth 👍🏼

@@prince7p268 a lot of people talking about that, will be interesting to see what the community comes up with 👍🏼

Should bind fine directly out of the box?

@@Andrew_Red exactly, awesome release by WPL 👍🏼