31
1 212 092

11:00

Building a Round Kitchen Table with Sculpted Legs

12:38

Baluster Trestle Table

14:50

Refinishing Furniture with Custom Stain Color

4:21

A Matching Dining Table

14:58

Building a Set of Dining Chairs

20:45

Building a Walnut Sideboard

This video is #sponsored by @minwaxusa.
In this video, I go through the build process of a Walnut Mid-Century Modern Sideboard for my wife. The sideboard features three long soft close drawers, flanked by doors on either side. The doors and drawer fronts are veneered and book matched, with decorative beading surrounding the face of the doors and drawers. The interior dividers are constructed using a web frame, and the cabinet back is constructed using floating panels with tongue and groove joinery. Finally, the case sits on top of a set of turned legs that are mortised into a support block. I applied a hand rubbed finish using Minwax Oil Based Polyurethane, and then polished and buffed with Minwax Furniture Paste Wax.
www.minwax.com/en
#minwaxpartner #minwax #furnituremaker #woodworking #woodworker #sideboard #mcmfurniture #midcenturymodern #furnituredesign #furnituredesigner

zhlédnutí: 4 519

Video

11:00

Modern Tall Entryway Table

zhlédnutí 3KPřed 11 měsíci

I was able to build a modern tall entryway table for my wife and posted a CZcams video #sponsored by @minwaxusa. I started with a set of templates that I drafted in 3-D space and cut out using my CNC. I then cut the legs and aprons on the table saw using the templates and an L-fence. The entire piece was joined using Domino slip tenons since this piece did not require any decorative exposed joi...

Building a Round Kitchen Table with Sculpted Legs

12:38

Building a Round Kitchen Table with Sculpted Legs

zhlédnutí 3,3KPřed rokem

This video is sponsored by Minwax - makes and keeps wood beautiful. www.minwax.com/? I was commissioned by a local client to build a 50" round kitchen table with a 4-legged sculpted base assembly and posted a CZcams video sponsored by Minwax. I started with a set of templates that I drafted in 3-D space and cut out using my CNC. I then template routed the table parts and joined the parts using ...

14:50

Baluster Trestle Table

zhlédnutí 4,2KPřed rokem

This video is sponsored by Minwax - makes and keeps wood beautiful. www.minwax.com/? Occasionally, potential clients will ask me to build a furniture piece with turned legs. I usually turn down these types of commissions, because I’m not a very good wood turner, especially when it comes to making copies. In this instance, I gave the option to build a trestle dining table with baluster legs so l...

Refinishing Furniture with Custom Stain Color

4:21

Refinishing Furniture with Custom Stain Color

zhlédnutí 2,3KPřed 2 lety

In the spirit of Woodworking Month, the kind folks at Minwax reached out to me to produce a video on custom color matching using their Performance Series Tintable Stain, available exclusively at Sherwin-Williams. I was fortunate enough to have a client that requested I remove the damaged polyurethane, apply a stain that matched a set of dining chairs, and apply an oil based polyurethane. www.mi...

14:58

A Matching Dining Table

zhlédnutí 21KPřed 4 lety

After building the set of dining chairs, I needed to build a matching trestle table for my client. I knew I wanted to incorporate accent details such as Walnut plugs and pillowed wedged mortise and tenons. I also wanted to incorporate some gentle curves to the dining table that are seen throughout the dining chairs. While I did not incorporate aspects of cloud lifts in the table design, I wante...

20:45

Building a Set of Dining Chairs

zhlédnutí 92KPřed 4 lety

In early 2019, I started building a set of Arts & Crafts style dining chairs. The process was an exercise in maximizing efficiency and developing methods of repeatable production in a small shop setting. The set consisted of two arm chairs and four side chairs and made from premium Pennsylvania Cherry. All of the mortise and tenon joinery was done using the PantoRouter. The exposed through mort...

14:05

Drop Leaf Side Table

zhlédnutí 24KPřed 4 lety

In this video I build a drop leaf side table out of quartersawn Sapele. The table features four-sided taper legs, brass tapered cup casters, rule joints for the drop leaves with concealed hinges, and a telescoping support arm with brass insert knobs/pulls. Thanks for watching and for following along Instagram: @alabamawoodworker

Milling Rough Lumber: Surface 4 Sides S4S

9:25

Milling Rough Lumber: Surface 4 Sides S4S

zhlédnutí 180KPřed 5 lety

I'm back! I took a 9-month break from making videos to prepare for the arrival of our new-born, Eleanor Claire Huynh. To get back into the swing of things I wanted to share a more comprehensive video on how I mill rough lumber to surfaced 4-sides (S4S) in preparation for use in a project.

16:17

Sit-Stand Desktop Build Part 1

zhlédnutí 28KPřed 6 lety

In this video I start a new build series where I construct a Greene and Greene inspired sit-stand desk using a commercially available electric adjustable desk frame by Flexispot. Disclaimer: Flexispot provided me with their three-stage electric adjustable standing desk frame and in return they asked me to design a high-end desktop and document the build. Product link and Amazon link are below. ...

Sewing Table and Stool Part 4: Seat Cushion, Glue-Up, Finish, and Hardware

9:30

Sewing Table and Stool Part 4: Seat Cushion, Glue-Up, Finish, and Hardware

zhlédnutí 4,8KPřed 6 lety

In this video I complete the sewing table and stool by applying a seat cushion, pre-finishing with shellac, gluing up the table and stool, applying a top coat, and installing the table top and seat cushion fasteners. In part 1 of this series (czcams.com/video/mBk2WzvYhC8/video.html) I milled and machined the joinery for the bases to the sewing table and stool. In part 2 of this series (czcams.c...

Sewing Table and Stool Part 3: Adding Shape to the Tenons, Legs, and Rails

6:25

Sewing Table and Stool Part 3: Adding Shape to the Tenons, Legs, and Rails

zhlédnutí 3,8KPřed 6 lety

In this video I pillow the through tenons, raise the apron rails, and taper the legs to the sewing table and stool. These details are small additions but make the piece more elegant. In part 1 of this series (czcams.com/video/mBk2WzvYhC8/video.html) I milled and machined the joinery for the bases to the sewing table and stool. In part 2 of this series (czcams.com/video/D-T2MUP-O5Y/video.html) I...

Sewing Table and Stool Part 2: Curly Cherry Veneer Table Top

12:38

Sewing Table and Stool Part 2: Curly Cherry Veneer Table Top

zhlédnutí 7KPřed 6 lety

In this video I construct the curly cherry veneered table top, which features a solid cherry border joined with bridle joints, 1/8” holly stringing inlay, and an under bevel as an edge treatment. This part of the build involved many intricate steps but with patience I was able to properly execute each step. In part 1 of this series (czcams.com/video/mBk2WzvYhC8/video.html) I milled and machined...

Sewing Table and Stool Part 1: Through Mortise and Tenons

7:05

Sewing Table and Stool Part 1: Through Mortise and Tenons

zhlédnutí 10KPřed 6 lety

This is the start of a new build series. A sewing table and stool for my mother. I gained inspiration for this build from Michael Pekovich’s floating top work table and although there are obvious difference between my design and Mr. Pekovich (notably my joinery methods) I asked for his permission to call this design my own. In my previous build series, I’ve shown sketch up drawings to explain m...