Video

@@shildapressley6362 no I haven't used epoxy. Might not be a bad idea for the half pearls since the coating could peel over time but I've never tried it before.

You're welcome!! Thanks for watching! 🥰

Unfortunately, hot glue wouldn't stick long term, it's kind of bulky and it dries way too quickly.

FR😂

What type of pen would you like to bedazzle? I would like to look into that particular one as well. Please let me know, thanks.

@user-wg6jc6bs1u What type of pen would you like to bedazzle? I would like to look into that particular one as well. Please let me know, thanks.

@@jeweledbyjazdiythey’re talking about a pen battery for vaping weed

@michaelyegorov226 ohhhh I've done that too!! I should Upload it!! Lol

Hello! In this video I used e6000. I use e6000 only when I don't feel like sanding my cups. If I sand them then I use liquid fusion because it has a much less toxic smell but adheres at its best only when the cups have been sanded. 🥰

Thank you! No, the paint doesn't come off. It gets sealed by the glue that's used while blinging the cup.

About 3000 to 5000. Majority are 5mm and I use some 3mm when needed for small spaces, gaps or if I'm blinging a name.

Hello! Thanks so much for watching! 🥰 All materials used are linked in the description and for the decor pieces (like the chanel pieces), I got them from a website called: jeniscabsanddiysupplies.com but I will link that as well. Thanks again for watching!! ❤

Hi!! I'm so sorry for the late response!! I took a hiatus to work on my health! So sorry!! Yes you can but you will have to sand it with Sandpaper first to help the stones adhere because on smooth surfaces the stones could peel off. E600 could help them stick on smooth surfaces but for longer lasting results, it's best to sand the surface. Hope this helps! 🥰❤

Hi Lyndsay! So I have done them both ways but if I was ever in a rush I just cleaned the lid and used e6000. For the times that I used liquid fusion on the lid I have always used a rotary tool to sand with because of how smooth the lid is and those textured edges on the lid. Then I cleaned & dried and the liquid fusion was perfect! If you don't sand the lid and use liquid fusion it will definitely stick, but not for long. The whole thing will just peel off.

@@jeweledbyjazdiy Thank you!! So I’d sand and clean if using liquid fusion. I’d just need to clean & dry if I was using E600. The LF I’m guessing needs some texture to adhere to

@@lucalalee yes exactly!! You explained it so much better!! Sorry for the long explanation 😅 😬

@@jeweledbyjazdiy Don’t worry about it 😊 thank you for the help

Hi Jazmin! The resin rhinestones are really good but I also love the glass rhinestones! I used my own rhinestones back when I used to sell them but if I ever ran out I bought from Amazon. I will leave a link for some of the best quality resin rhinestones and glass rhinestones in the description!!

@@jeweledbyjazdiy thank you so much! ❤️

Hello!! My apologies for the late response. The tool is a rhinestone wax pick up tool. I just listed a link in the description of this video and it will take you right to the tool. I also listed the link below but wasn't sure if it would take you there. Hope this helps! 🥰 amzn.to/42sBQBS

Heyyyy!! Sorry I'm late 😔 but for long lasting results, I recommend e6000 but make sure you're in a well ventilated space and use a face mask. The fumes can be a bit much. Also, make sure you sand your cup with sand paper first and then wash and dry it. (With stainless steel surfaces you don't always have to sand, especially when using e6000 but always make sure to either wash and dry first or rub it down with rubbing alcohol & let dry before blinging.) For the rhinestones, I like both however the glass rhinestones sparkle a lot more than the resin but they are also more fragile since it's glass. If you drop a cup made with resin rhinestones it's less likely to have breaks or cracks but if you accidentally drop the glass stones they could crack and break. Resin is beautiful but the sparkle of the glass is on another level! 💎💎💎 Hope this helps 🥰❤

Hi Ellie! That's awesome!! Yes, you can go line by line from top down and start a circle the closer you get to the logo or you can start with the logo and bling about 3 or 4 circular rows and then go to the top and start blinging line by line from top to bottom. Happy Blinging 💎🥰

What do you think would be easier for first timer? Completely going around the cup In Rows or starting with the circle and going up a few rows then starting for the stop? It’s going around the circle and then starting from the top that scares me just incase it doesn’t the rhinestones don’t match up x

@@elliegray1849 When I first started blinging I tried it by doing one circle and then going to the top and working my way down and then I tried just going from the top and just get to the circle when I get there. Doing a few rows of circles and then going to the top was the easiest for me. I know the circle can be a bit intimidating but just take your time when connecting the straight lines to the circles and don't be afraid to use those smaller 3mm sizes. The 3mm rhinestones are what help to make the connection between the lines around the logo and the straight lines look clean and uniformed with minimal gaps.

This is the 24oz Plastic Reusable Starbucks Cup with Lid from Starbucks but you can use any plastic cup also.

Hey!! You're welcome!! Thanks so much for watching!! As far as sanding goes, there could be a chance that the rhinestones will eventually peel off if the case isn't sanded first especially if it's that smooth shiny coated flexible case. If you use e6000 glue, you will get a pretty good hold but still run the risk of it peeling off. If you use glues like liquid fusion and fusion tack there's a huge chance it will come off without sanding. Hope this helps!! Thanks again for watching!! 🥰

@@jeweledbyjazdiy it helps a lot. Thank you for such a thorough response. I guess I need to grab some sandpaper for these projects. I use mainly E6000 but go through it quickly. I also use krysyal glaze glue

@@MommySlays great!! You're welcome 🥰 I have to try the Krystal glaze, someone else mentioned this as well!

That's so exciting!! I remember blinging my first starbucks cup!! I still have it! It's all about how you prep the cup. If you use an adhesive like liquid fusion or fusion tack without properly sanding and cleaning your cup first then yes, it can crack and the stones will fall off. However if you don't want to sand the cup, you can use e6000 glue for a firmer hold (toxic smell though) but if you sand the cup and use e6000 it will last you some years!! (Sorry for such a long answer) lol

@@jeweledbyjazdiy I sanded the cup, cleaned with alcohol and spray painted it- now waiting on some other stones to arrive. My daughter has changed her mind like 20x already. 🤦‍♀️ Thank you for your reply, I appreciate it! Be blessed!

@@isamaralonso-ruiz3004 thanks you too!!!🥰 Did you get to start your cup? I'd love to hear how it's going!! 😌

Thanks! I have them available in my shop, working on restocking everything soon!! I will post a short of the new and updated items once I have restocked them all. Thanks for watching!! 🥰🥰🥰

After sanding, no not at all. However, if you don't sand the top silicone layer off then yes, they will fall off.

After gluing the rhinestones you should allow the cup to cure for at least 48 hours. After that, yes, you can hand wash with soap, water and a sponge. Dry immediately after washing.

I do recommend sanding for those as well. However if you use e6000 glue or epoxy to adhere the stones then you won't need to sand. If using any other glues, I do recommend sanding.

Thanks so much for watching!!

You're welcome!! Thanks so much for watching! 🥰

Thanks so much! No I don't mind you asking! They are 5mm resin rhinestones. I have them available in my Etsy Shop. The link is in the description if you are interested in giving them a try. 🥰

Hey Jazzy!! I'm so sorry for the late reply! The 2nd link is the one that works. My apologies! I meant to remove the 1st link. I will do that now!!

Thank you for watching!! 🥰💖💜

It really is a fun project! I am still working on making kits for these and plan on having them posted on my site no later than this weekend if you're interested!

Oh wow.. sorry about that. 😳 It was my first video with music and I didn't know to turn the sound down more. I'm so sorry. 😔

Hey Angela! Nope! You can do this on any case! Hard or soft. Silicone is the only type of material I have issues with. It would require a different kind of glue but I haven't experimented with it just yet.

@@jeweledbyjazdiy gotcha! Thank you so much!

@@angelatillman you're welcome! 🥰

Thank you so so much for watching!! I truly appreciate your support!! And Yesss!! Protecting yourself at all times is so important!! I would hate for someone to get harmed when it could have been prevented. As for the e6000, I get these from Walmart! They have the best price for them and it comes with everything you need. The tips and a cap to close the glue when you're finished using it. They are in the crafting section and the beads sections of walmart. 😉

I just got some at walmart

@@representing50plus awesome!! They have the best prices for it!!

Awesome have fun and let me know if you have any questions!! I have these kits available on my website if you're interested.. the link is in my description. Happy blinging!! 💎🥰❤

Hi Summer, I use both! This one was plastic.

Oh ok!! You did a good job 👏🏾 you

@@summernance2198 Thank you so much!!!! 🥰🥰🥰

Hi Grayson. The scatter pattern uses various different sizes (usually 2mm up to sometimes 10mm) and are picked at random. I'm not sure if you notice, but the majority of this pen was done in 5mm with the honeycomb method, and I used 3mm rhinestones as fillers since sometimes the 5mm rhinestones do not fit evenly around the pen so fillers are needed. Maybe if I had worked going around the pen to reflect that, instead of working going downward then around, it would have represented this better.

It allows the glue to adhere better to the case. The phone cases have a very smooth texture and when using liquid fusion or fusion tack on this texture, it could end up peeling off. E6000 would work just fine without sanding but sanding is the safest. Using a piece of sand paper also works very well.

You're welcome!! Thanks so much for watching! 🥰❤

Hi Penny! I don't usually seal the paint afterwards. The glue I use seals the paint underneath the rhinestones but any extra paint that is left behind does get washed off.

Hi Angela!! Thanks so much for watching!! I am actually creating kits for these decorations. I will have them available by the end of this week if you are interested.

@@jeweledbyjazdiy Thank you! Btw, I placed some orders with you from your website :) I'm soo excited to try this work

@@angelatillman oh yeah!! I remember your name and your order!! Thank you so much!! I truly appreciate your support!! 🥰🥰

@@jeweledbyjazdiy you're so welcome!!

They come with the glue.. it is the e6000 with precision tips. I usually get mine from Walmart in the crafting section. Sometimes they are next to the beads and sometimes next to the wall mounting putty.

@@jeweledbyjazdiy Thank you so much

@@jasmainh6704 you're welcome 🥰

Thank you so much!! 💓

Sure! Materials used: Stainless steel cup Paint (optional) Paint brush Wax tool Rhinestone trays Rhinestones Sand paper E6000 glue, liquid fusion glue, fusion tack glue Precision tip bottle Glasses & mask (optional) I also sell these kits on my website which includes everything needed for this. The link is in the description. I hope this helps. Thanks for watching!

No you don't have to. Especially if your cup already has a colored background.

You're welcome! Thanks so much for watching!! 🥰❤

Hi Aaroni! It comes with the glue when you buy it.

@@jeweledbyjazdiy I have never seen one for mines 😭 I was going to ask that same thing because i usually have to buy Syringe tubes & tips

Hi Septina!! I love your name it's beautiful!! 💖 Thank you so much for watching my video and for subscribing!! I'm so happy that you like it 🥰🥰😄❤

I squeeze the glue into these bottles they are precision tip bottles.

Hi Sarah! They take me about 2 to 3 hours. On a good day close to 2 hours. The method where I apply a large square of liquid fusion takes the least amount of time.

Hi Loreena! I'm sorry, what number are you asking about so that I can clarify 😊

@@jeweledbyjazdiy what size ss20 What mm

@@loreenalabad300 I use 5mm (ss20) and 3mm (ss12) to fill in the small spaces.

You're welcome!! 🥰❤