Video

You are right. Luckily I still had the text. Done. Thanks

As I remember, if you click on me at bottom right you come to "advanced" that is where you go to adjust level. Here is something about "enhanced processing" that needs to be clicked. Otherwise the sub light files are not saved. Then they are seen when the cable is connected to computer. I have another CZcams about Seestar. Have a look under "youtube irandar"

Want to give you a better answer. See this czcams.com/video/sUWox0UVy7s/video.html At time 2.20 is the Seestar window you need about saving files.

Details please.

@@irandar The entire Milky Way is over processed and oversaturated. I wouldn’t even recognise it as the Milky Way if there wasn’t stars in the photo and, even then, it’s difficult. The contrast is over the top too and, overall, it just looks like a smudge of colour as if a painter has knocked over a couple of tins of red and green paint.

Very funny. Do you know how to turn it off? Is the app useful to you? Regards

Some good ideas here. Turn the music off if it bothers. Are you trying to learn about Affinity Photo for astrophotography?

​@@irandar Just adding a few more comments to your Astro group request Irving.

@@PaulM_aka_4c21 Hi Paul. Glad for any input. If you have time and interest maybe you could help me with the proposed FB group. Calling it Affinity for Astro?? Enjoyed your Kos film. The anchor winch scene is great and of course the water.

@@irandarBest to put all the search keywords so in my opinion, “Affinity Photo Astrophotography”would more likely be found. Yes glad to help set it up.

@@PaulM_aka_4c21 Thanks, I think I want to put some more tutorial stuff on here and see if it finds followers.

Glad you enjoyed it. You can see quite a few more such tutorials on my Irandar Channel.

I think those holders shown will work ok. Remember you are lining up the iphone camera view to where the scope is pointing. If you try it I would be glad to know of your experience. Free no on app store.

Astrophotography: Getting Focus with a Camera on a Celestron StarSense Explorer DX 130 czcams.com/video/b8T8vljMz_s/video.html

Maybe not sure. Let you know in 8h

Greetings, It's still there. Gotta spell it carefully. Also the simpler one called PushToCam is not bad and does not require lining up the phone camera. And the middle one FinderCam. See this deepskycolor.blogspot.com/ for details on all. Would be glad to know your experiences. Thanks and regards

PlateSolveCam is there but not the other two.

What would you suggest?

How is this?

​@@irandar the starsense alternative

I guess you can use any files. But everybody makes and stacks raw files because they have the most information. Files that are available for practicing are usually FITS files. These are already corrected for the telescopes and sensors used, so no dark, white and bias files. Have fun

Glad you like it Terry

Of course with Affinity Photo you can convert to black and white with an adjustment layer.

Thanks for your comment. I am a beginner but making videos helps me learn and helps other beginners. I was wondering why zooming does not always show much of the object. Such as Andromeda M31, the shape is hardly seen. Of course one can go to the Wikipedia link. I want to do a video on FOV software. I saw that Stellarium also has an FOV telescope feature. I am also interested in the planetarium feature too. Lots to do with this hobby. Regards, Irving

The plans called for an arm but in this reduced 80 percent I thought the drum would be better. Also I bought a cheaper radio and server which did not give enough travel.

Also I had a cheaper radio and servo which did not have enough travel

Have you tried it yet?

The dimensions for Emma's keel are 15cm at top, 10.8cm upper forward edge, then angled to bottom, 54 cm trailing edge straight down to bottom, bottom is 6.4cm. Top and bottom are at right angles to trailing edge. Forward edge is right angles to top. but 10.8cm down is angled off to the bottom. There are holes at top for pins and holes near bottom for the lead. Hope it is clear.

There is enough sail control with lines to both sails (jib and main) using only one servo. The second servo is for the rudder. Your English is fine.

Oh wanted to say that the jib did not respond well because the line was too stiff.

Have a look at this video czcams.com/video/601iP7YPyQA/video.html and you can see how one servo controls two sheets for two sails. I have to finish my 80% Irene with a few hours for rigging and have just ordered plans for Annie and Regards

irandar ok I just wanted to ask because when I sail sometimes I have the jib out and the main in for turning if the wind direction changes from left to right or right to left

No rope would not work, unless you had two people holding it tight on both sides. As the mast is raised (or lowered) the slider, which attaches the boards to the mast moves down (or up). In this way, the mast cannot move to port or starboard. The boards could be very light weight, or even bamboo poles could be used. There is very little force on them. The only force is on the line and forestay running from the bow to the top of the mast. Be very careful to belay this. It is best to have two persons, one belaying the forestay line and one catching the mast as it comes down. Good luck and be careful.

@@irandar thanks much. i see your point now

I used rope with my mast raising & lowering. It must be tied on each side, in line with the mast. I leave just a little slack, so if it's not perfectly in line it won't be put on a bind as it's raised or lowered. I use a come-a-long to raise it, but a winch would be a little easier. I used to use an electric winch with another boat I had, which raised it very quickly.

Thanks for the complements. Are you building an RC sailboat? I have almost finished building Irene at an 80% scale, which gives 50% displacement, about the same size as Emma. I watched now some of your favorite videos. I have a few videos with real sailing and boating on the Irandar channel. Best regards.

Fuck you dude... This is a free service, the creator gets to pick whatever music they like. On the subject of what people come here for, I didn't come here for your bitching over a video the creator clearly went to a lot of effort to produce...for free. Get a fucking life, and while you're at it, know that Clarence White played the guitar better than anything you're likely to do in your life.

The man ain't got no culture!

I do not know of any websites for free plans. In fact, I am going to suggest that they raise the price for the plans. It is too cheap compared to all the other costs. Are you building something? Regards,

Ya can't please em all. Just turn off the sound.