- 422
- 5 547 510
Ingersoll Cutting Tools
Registrace 2. 02. 2009
GoldTwist Small Diameter Demo - 4140 Alloy Steel
Product information:
www.ingersoll-imc.com/product-lines/gold-twist
www.ingersoll-imc.com/product-lines/gold-twist
zhlédnutí: 387
Video
GoldFlex Wide Demo Incl. 3 Different Profile Cuts
zhlédnutí 1,1KPřed měsícem
Product information: www.ingersoll-imc.com/product-lines/gold-flex
HiPosWinV - (5) Demos - 6061 Aluminum & 15-5 Stainless
zhlédnutí 600Před 2 měsíci
Product information: www.ingersoll-imc.com/product-lines/hi-pos-win-v
MultiLTurn Demo - 4140 Steel
zhlédnutí 686Před 2 měsíci
Product information: www.ingersoll-imc.com/product-lines/multi-l-turn
GoldTwin Modular Demo - 4140 Steel
zhlédnutí 1,1KPřed 2 měsíci
Product information: www.ingersoll-imc.com/product-lines/gold-twin-mod
WinIGroove Internal Grooving Demo
zhlédnutí 386Před 3 měsíci
Product information: www.ingersoll-imc.com/product-lines/win-i-groove
SpadeTwist LPC Self-Centering Tip - AISI A48 45B GG30 and 4140 Steel
zhlédnutí 378Před 3 měsíci
Product information: www.ingersoll-imc.com/product-lines/spade-twist
TModular and TAbsorber Demo
zhlédnutí 2KPřed 4 měsíci
Product information: www.ingersoll-imc.com/product-lines/t-modular www.ingersoll-imc.com/product-lines/sfeedup-t-absorber
DiFeedWinV Demo - P20 Steel (40CrMnMoS8-6)
zhlédnutí 1KPřed 4 měsíci
Product information: www.ingersoll-imc.com/product-lines/di-feed-win-v
2024 MaxSFeed Expansion 5 & 8 mm Inserts Demo - 4140 Steel
zhlédnutí 1,3KPřed 4 měsíci
Product information: www.ingersoll-imc.com/product-lines/max-sfeed
GoldSFeed 6mm Demo - 4140 Steel
zhlédnutí 1,1KPřed 5 měsíci
Product information: www.ingersoll-imc.com/product-lines/gold-sfeed
WinSFeed SolidDrill3 Demo - 4140 Alloy Steel
zhlédnutí 428Před 5 měsíci
Product information: www.ingersoll-imc.com/product-lines/solid-drill-3
WinSFeed QwikReamS Demo - Cast Iron AISI A48-45B GG30
zhlédnutí 526Před 5 měsíci
Product information: www.ingersoll-imc.com/product-lines/qwik-ream-s
SFeedUP FaceFlex 2mm Expansion
zhlédnutí 404Před 5 měsíci
Product information: www.ingersoll-imc.com/product-lines/face-flex
WinSFeed TClamp TDXC Demo - 1045 Steel HRc 20
zhlédnutí 1,1KPřed 6 měsíci
Product information: www.ingersoll-imc.com/product-lines/t-clamp-tdxc
WinSFeed DiPosQuadF 45° & 20° Lead Demos - Ductile Iron (80-55-06)
zhlédnutí 546Před 6 měsíci
WinSFeed DiPosQuadF 45° & 20° Lead Demos - Ductile Iron (80-55-06)
Repost - SFeedUP Expansion - TwistSFeed Demo - 4140 Steel
zhlédnutí 3,3KPřed 6 měsíci
Repost - SFeedUP Expansion - TwistSFeed Demo - 4140 Steel
WinSFeed - DiPosQuad10 Demo - Ductile Iron (80-55-06)
zhlédnutí 876Před 7 měsíci
WinSFeed - DiPosQuad10 Demo - Ductile Iron (80-55-06)
WinSFeed TClamp VT Demo - 1045 Carbon Steel
zhlédnutí 1,2KPřed 7 měsíci
WinSFeed TClamp VT Demo - 1045 Carbon Steel
WinSFeed WinCut Demo - 1045 Carbon Steel HRc 23
zhlédnutí 724Před 9 měsíci
WinSFeed WinCut Demo - 1045 Carbon Steel HRc 23
NuMax ILock Demo - SFeedUP Expansion - 4140 Steel
zhlédnutí 2,5KPřed 10 měsíci
NuMax ILock Demo - SFeedUP Expansion - 4140 Steel
Ingersoll WinSFeed Event 18&19Oct2023
zhlédnutí 834Před 10 měsíci
Ingersoll WinSFeed Event 18&19Oct2023
WinSFeed WinTurn Demo - 45% Carbon Steel
zhlédnutí 2,3KPřed 10 měsíci
WinSFeed WinTurn Demo - 45% Carbon Steel
WinSFeed WinTurn Demo - .45% Carbon Steel
zhlédnutí 49KPřed rokem
WinSFeed WinTurn Demo - .45% Carbon Steel
HiPosProB - Fast, Pristine Finishing from Barrel-Style Inserts
zhlédnutí 1,4KPřed rokem
HiPosProB - Fast, Pristine Finishing from Barrel-Style Inserts
Chip Surfer: Accuracy with True Simultaneous Fit
zhlédnutí 1,6KPřed rokem
Chip Surfer: Accuracy with True Simultaneous Fit
Chip Surfer Solid ER Shank, Coolant Exit Style 4
zhlédnutí 1,2KPřed 2 lety
Chip Surfer Solid ER Shank, Coolant Exit Style 4
interesting concept , ive seen single flat cutters similar use for wood , but never for metal with a rotational cut face , be great for a cnc lathe application multi head spindle change out ,take the guess work out of small production work ,are cutters customize for specific task application
Hello! Do you make drilling tools for wind turbine blades?
To complicated.
It that your expert opinion about an advanced tool from a multi-billion dollar world-wide company?
@@JorgTheElder 40 years. What is your answer to a shitty expensive tool?
Doesn't seem very complicated to me.
@@TNH91 Well, try to replace the inserts after a few hours of work. And pay for it. :)
@@atvheads As opposed to paying for someone to sharpen a fully carbide drill at that size? The cost of easily replaceable carbide inserts is almost negligible compared to the time cost of having to change a full drill and getting it sharpened. Not to mention how the cost of a fully carbide drill of that size would cost a lot too. Now, if you live somewhere where the labour costs aren't that high then spending more time on it instead of paying more for the tool may make more sense.
i searched my username and this is the first thing that popped up
Damn, what machine are you using, RPM, depth of cut, feed rate and tool + insert are you using ?
Quoi ? Aux States on emploi pas le système métrique ? Ah oui . J’oubliais. Vous ne l’avez pas inventé.
The sound of high feed turns me off. I have to wonder if there's a difference in spindle longevity
It will last longer. With feed milling all the cutting forces go directly upward into the spindle which is a GOOD thing, unlike traditional side cutting/milling which puts a lot of radial force on the spindle (not good). Feed milling also gives EXTREMELY predictable and reliable tool life with very high metal removal rates.
@@CNCMatrixcompared to the very smooth cutting from more traditional side-loaded tooling, high feed shakes and vibrates machines significantly. The impulse from this is the root of my concern. Chatter can kill a spindle. What many high feed tools exhibit seems to be low frequency, high amplitude chatter. I haven't seen independent studies done.
I really wish the camera was on the part and not the cutter. It makes me motion sick watching these, despite how cool they are.
I am really confused by our comment, it looks like the video is shot with cameras setup outside of the machine and focused in on the tool body. the machine is a vertical milling center where the table moves in the X and Y axis and the Z axis (spindle) moves up and down, the spindle does not move in the X or Y
Ваш рекламный тахометр похоже девочка-гуманитарий рисовала... Он же полностью наоборот нарисован!
I run the same machine 😊.
Mmm, kenne es als ,,Sintermetall", wird aus, sicher Geheimrezept, gebacken. Kommt an Härte 10 Diamant nah drann!! Kurt
How well does this work for EN 1.4436/ EN 1.430? We're looking for roughing inserts that can last longer 😅
Where to buy?
Ingersoll or Taegutec :)
What's the price of tool 20mm holder and Tips?
0.45 % carbon steel
+ @evgenarifov8846 That is correct. Thank you for your interest. -Ingersoll Cutting Tools
SWEET
Hell yeah would love to try one
Thank you for your comment and excitement regarding this new insert size! Please reach out to your local ICTC sales engineer or distributor, they would be happy to arrange a test for the CERASFEED.
Surely I'm not the only one unimpressed?
Drooling right now
You put a commercial on a 20 second video. Good way to lose tool sales.
+@trilliondollarman2514 Thank you for your comment. At Ingersoll Cutting Tools, we have never monetized our videos, because we wanted to allow users to watch them without ads. Unfortunately, in May of 2021, CZcams changed its terms of service, and now "CZcams has the right to monetize all content on the platform and ads may appear on videos from channels not in the CZcams Partner Program." We apologize on behalf of CZcams, and we hope that viewers will understand. -Ingersoll Cutting Tools
@@IngersollCuttingTool I didn't know that. Thanks for the reply. What a bunch of greedy crooks they are.
greetings . Can this cutter cut steel even only laterally?
+Lele Armi - The DiPosFeed line of high feed tools are capable of Z-level roughing, profiling, contouring, channeling, helical/corkscrew milling, ramping, and plunge milling. At the following link there is a brochure with detailed information, including operating guidelines in various steels and stainless steel, and there are also several videos showing the tools in action: www.ingersoll-imc.com/product-lines/sfeedup-dipos-feed For additional information, please call our Customer Support Team at 800-380-0852, or email technicalsupport@ingersoll-imc.com. Thank you for your interest. -Ingersoll Cutting Tools
So that is what the shim pin is for. They show one as a replacement for a lot of holders, but I had never used one. I really like the clamp system.
what speed and feed?
+Slovnoslon The specs are in the video description. Thanks for your interest. -Ingersoll Cutting Tools
работали такой фрезой от фирмы Искар. Не участвующие в работе кромки получают повреждения из за касания об деталь . Не достаточно хорошо просчитана геометрия пластин. Задняя нога опережает переднюю
+Vova Putin - This design is not the same as other tools in the industry. The insert seating area on the Ingersoll tools is larger to prevent deformation. For additional information, please call our Customer Support Team at 800-380-0852, or email technicalsupport@ingersoll-imc.com. Thank you for your interest. -Ingersoll Cutting Tools
Cool design, sounds horrible.
Curious what sounds horrible, I am new to this type of milling
To me that sounds like a face mill going through alloy steel. i don't see whats wrong with it
what is the tool edp number for this tool. i just quoted a job that will need this?
+leatherneck Precision Machine - Seat Track Cutters are form tools with different angles, radii and tolerances. Ingersoll quotes them based on the form provided by the end user. For additional information, please call our Customer Support Team at 800-380-0852, or email technicalsupport@ingersoll-imc.com. Thank you for your interest. -Ingersoll Cutting Tools
That extension does not look like 5.2455". Maybe you mean gage length?
+Kuei 12 The product manager for these end mills confirms that you are correct. It should be extension from gauge line, and the video description has been corrected. Thank you for the good catch and for keeping us honest. -Ingersoll Cutting Tools
Performance on Titanium?
+Kuei 12 On page 28 of the brochure at this link: ssl.ingersoll-imc.com/resources/pdf/new-343-1_gold-sfeed.pdf, there are recommended cutting parameters and insert grade recommendations for Titanium. For additonal information, please call our Customer Support Team at 800-380-0852, or email technicalsupport@ingersoll-imc.com. Thank you again for your interest. -Ingersoll Cutting Tools
@@IngersollCuttingTool Thanks again!
No info? It never happened.
+Kuei 12 Good idea. Specs have now been added. Thank you for your interest. -Ingersoll Cutting Tools
@@IngersollCuttingTool Thank you! Now, I am impressed.
Chips not good, not a clean cut.
I want to see the tool engage the workpiece.
No
Why so slow
Металл горит. Где СОЖ?
Fantastic video!!!
So rigid at the enter 😅
Seems like great tools if the company would actually return emails or phone calls for support...
+shawnhuk Hello and thanks for your interest. We apologize for any delay you have experienced in receiving support for an Ingersoll tool. We invite you to either email our technical support team at technicalsupport@ingersoll-imc.com, or for immediate help, call them at 800-380-0852, Monday through Friday, 8:00am to 5:00pm Central Time. If necessary, the tech support team will also be able to connect you to the national product manager for the MultiSurfer line. We look forward to hearing from you. -Ingersoll Cutting Tools
Ебать Там припуск))
Beautifull ✨
Fantastic ✨
Fantastic ✨
That’s a nice cut
Please advise your conditions, if we want to be your first agent in Vietnam market
What type of holder and type size are this
+Mangesh Borkar Thank you for your question. Please see our website: www.ingersoll-imc.com/product-family/516776. In the Product Bulletins tab there is a PDF file with information about the inserts and holder used in the video: ssl.ingersoll-imc.com/resources/pdf/NEW-141-1_T-Force-50mm.pdf. Feed and depth-of-cut recommendations are also in that document. -Ingersoll Cutting Tools
What is that step on the pocket floor?
+Kuei 12 Thanks for your question. The .03” step is deliberate. The program was written for a very shallow ramp along the outside wall. See this image: ssl.ingersoll-imc.com/resources/images/multisurfer-shallow-ramp-and-step-1000w.jpg -Ingersoll Cutting Tools
You guys might get more views if you had enough sense to put your company name in the title.
6s and 9s baby!
good
GOOD
GOOD