Video

I don't think I have one. Pcb preparations were taken from Trinket M0 site

@@MarcinKuna OK! Thanks! I have a friend who lives in the USA, MIA and he is coming to Brazil in August. I'll ask him to bring me some PCBs.

It's whole side is perforated, maybe you didn't leave enough clearance?

Not really, but my motherboard has a very crappy bios that doesn't control much of fan headers. Glad you liked the video

Nothing planned for now - don't have much time, and I'm occupied with family and other projects

It's 70 mm with only bottom fan, in dual fan mode it will be somewhere around 85 mm, which is too much

@@MarcinKuna two fans are better than what you have now anyway, so quad fan is an overshoot i think.

Quad fan? That's something I'd like to see 😁 and by 85 being too much I meant that it won't fit in case in dual fan mode

@@MarcinKuna this is a double width cooler. so you put two 92mm fans at the bottom, next to each other, inline. so if you put two more at the top you get quad.

I think we're talking about different CPU coolers, or NH L12S had an update. Can you provide link do picture with 2 92mm fans side by side?

Never tried that, but I think it would be a tight squeeze. But you can always go with external radiator

Good idea 👍

Updated description

@@MarcinKuna Thank you so much!

You sure you're not better buying auquaero quadro? 😁 are you from EU or US?

@@MarcinKuna I am in the US i just need a temp sensor for my custom loop i am making. Like you my mother board doesn't have the sensor pin out.

Added SKP file link to description

@@MarcinKuna Thank you so much!

I also used Arduino IDE. I remember that it had to be set up according to Trinket m0 tutorial - did you do that?

Thanks for the tip 😉 I'm actually not typing that much, but maybe some day I'll check that keyboard training.

Scythe Big Shuriken 3

But in the video it was noctua L9x65

The limitation is 245mm so it should be fine

than you dont have a good 60% keyboard

Not really, I don't have a very power hungry components, so I mostly tune my fans for peace and quiet

@@MarcinKuna ok. That makes sense. Will u consider adding 40mm noctua fans on top for ventilation? Or replacing the flex psu fan with a noctua fan?

Oj, mnie cięcie laserem panelu aluminiowego skosiło jak za zboże 😁 ale efekt był tego warty. A ZZAW B3 to świetna obudowa 👍

Thanks 👍 sure you can, just keep in mind that you need to install some feet on it to provide clearance

Racja 😉 choć przyznam szczerze, że ta gra zmęczyła mnie tak bardzo że nie myślałem nawet o multiku

Cieszę się że mogłem pomóc 😉

I don't think it will work. GPU and CPU cooler both sit right beside side panel and there is little room to put anything in case. Maybe externally might work, but that just goes against aesthetic 😁

@@MarcinKuna yeah I thought so too. Just a thought if those could fit internally, it could be cooled down more even when using it horizontally. Thanks a lot btw

Depends on backpack, but it's very compact. If a backpack can handle ps5, then k59 is no problem

A 25L backpack can handle this case.

my friend built this setup, he can fit a laptop and this case inside his backpack along with portable monitor 15.6 inch

@@TheWindows72306 you sure thats a backpack and not a suitcase bro? lol

​@@TheWindows72306yeah i hv anmite 15" and sold my k39 It's luggable but not sure bout this I do hv one 30L bagpack tho Might try this case once 4060 goes down to $199

W sumie, czemu nie? Co by Cię najbardziej interesowało?

@@MarcinKuna Głównie czy zauważyłeś jakieś zmiany w użytkowaniu, czy switche dobrze działają, czy RGB jest mocne, wszystkie klawisze się świecą i jak z aplikacją. Jak oceniasz pisanie na tej klawiaturze i ile czekałeś na klawiaturę?

I bought it from Taobao using cssbuy agent. I used this store: m.intl.taobao.com/detail/detail.html?spm=a230r.1.14.28.3d19f7fcLfc8GN&id=666395641207&ns=1&abbucket=17#detail

I used cssbuy, and shipping to Poland via China Post was about 50$

Yes, it has both metal and acrylic side panel - see my unboxing :-) But metal has very limited ventilation, so it would only be usable in APU build.

@@MarcinKuna aw that's unfortunate

Oczywiście 👍

Planujesz chłodzenie wodne, czy powietrzne?

@@MarcinKuna Powietrzne. SPC Ferra 5 dual fan

To niestety nie dam rady pomóc, ja mam pełne chłodzenie wodne

@@MarcinKuna Jak to się ma u Ciebie? Dokupowałeś jakieś wentylatory? Jak mają się temperetury u CIebie?

Tak, mam 4 wentylatory 120x25 od Arctic i 2 120x15 również od Arctic. Gdy są rozkręcone na 34% komp jest bezgłośny, a pod maksymalnym obciążeniem GPU ma 65 at, CPU 64, a chłodziwo 42.

Nope, stock switches and all. These keycaps have much better sound than stock keycaps, that's for sure

@@MarcinKuna thank you so much!

wow very impressive. also kudos for being a kaboom dev its hard these days with all those people marketing unity and stuff. im trying to get into game dev and considering getting this keeb along with other stuff for a productivity/programming setup

I'm leaning more towards Godot, but Kaboom.js is absolutely adorable :)

Dzięki 🙂 krew mnie zalewała jak słyszałem redditowych ekspertów marudzących, że sama im01 jest aż 2L większa od Nr200. A po wrzuceniu tego w SketchUp okazuje się że to prawie żadna różnica.

Hmm, nie znam się na AIO, ale radiatory przychodzą zazwyczaj ze śrubami 30mm do montażu 25mm wentylatorów. Jest to wystarczająca długość żeby mieć mocowanie ramka->wentylator->radiator. Tylko pozostaje zawsze kwestia ułożenia rurek które w AIO są na stałe. Alphacool np pisze o tym w instrukcji do radiatorów: www.angela.pl/galerie/a/alphacool-nexxxos-monsta_44654.jpg (30 mm screews to use with fan AND GRILL)

Hej dzięki za komentarz :-) tacka na płytę główną jest nieruchoma, ale można odwrócić całą "ramę" obudowy - wtedy zasilacz jest na dole, a GPU u góry

Special for you 😉 czcams.com/video/-G0cARYHEj4/video.html