- 242
- 2 362 370
Jeff Fassbinder
Registrace 7. 06. 2010
F-106 Maiden Flight by Jeff Fassbinder
Here is a scratch build of a F-106 Delta Dart. It was based on D. Savage 70mm design, enlarged and modification to formers was required. In addition, some extensions and forms were added to contour the shape of the fuselage. Ducting was created of fiberglass construction requiring the need for a plug. The model is built up of balsa and ply construction, and then fiberglass was used to cover the model. All paints are model master, and most glue used was ZAP adhesives. For the flight I used a Castle Creations 100HV with bec, the fan is a JetFan 80mm, and the motor is a Steve Neu 1500 series motor, Futaba was used for guidance. Flight control consists of elevons, steering, throttle, and retracts. I may cut in a rudder for more control on landing ops. Just in case your wondering the size of this airplane is 63" Fuselage, and the wing is 37.5"
zhlédnutí: 146
Video
BVM Maverick 120mm Tam E Max Castle Creations
zhlédnutí 372Před rokem
BVM Maverick setup on 12s with a Tam E Max Fan. This is a modified Dynamax fan system with a carbon shroud and an aluminum center body for motor cooling. The motor is a Steve Nue 1900 series motor for pulling the uplines. Castle Creation speed controller for power and consistency. This flight shows just some of the flight performance capable of this airframe and power system.
Skyray Scratch Build By Jeff Fassbinder
zhlédnutí 202Před rokem
Well, I've been Scratch building this model with plans as I'm not an aircraft designer. It's been a few years well maybe more than a few years as I've been working on this model on and off between other projects. I've had to learn to cut foam cores for my wing, make ducting and canopy hatch plug and fabrication. As well as cut all parts by hand after drawing them off of plans by Eugene Martin. ...
F 22 Composite Designed By George Miller
zhlédnutí 575Před rokem
This is a YF22 designed by George Miller. It was originally designed to use a byron fan system, and I opted for something a little more modern so the JetFan 120 was installed. Power is from 12s 6400 battery with Castle Creations 160 HV controller. This combo has been bullet proof for years. For flight control Futaba 18SZ. This is a few clips of take-off, a fly-by, and the landing. Got to thank ...
F4D Skyray Balsa and Composite Build
zhlédnutí 74Před rokem
This is a short clip of taxi testing my complete Skyray. Built from plan, all hand cut, created custom plug for ducting and made a form for the Canopy. Power system is Castle Creations 160 HV, with Futaba radio gear. Batteries are 12s 6400 to power the Dynamax 127mm fan with big screamer motor 650kv.
Leap 3D
zhlédnutí 256Před 6 lety
Leap a quad developed for the 3D pilot. This video taken at AMA field in Muncie, IN.
Cougar EDF 120mm Skymaster
zhlédnutí 1,6KPřed 6 lety
Skymaster EDF Cougar Bob using a TamJet 120 fan unit on 12s. The batteries used are Thunder Power 7700, with Spektrum Radio gear. Also using Robart Electric Retracts with a airbrakes. Bob had me do the install on this one and it come out great. Using only body flaps on this run, but has the ability to use flaperons.
MIG 15 Maiden Flight EDF
zhlédnutí 860Před 8 lety
Camera Man JT Fassbinder Futaba 14 SG Dual R7008SB Receivers Castle Creation Phoenix Edge HV160 Dynamax 127mm Big Screamer Gold 6600 MAH 12s CG is on the D-Tube Exhaust is at 98mm
Helicopter Flight 2
zhlédnutí 1KPřed 8 lety
Helicopter having fun rc flight #2 Pilot: the Gambler having fun!
Trex 700 DFC in Las Vegas
zhlédnutí 1,2KPřed 8 lety
Captured by a Drone in 4K out in Las Vegas. Pilot: is the Gambler!
Avalon Bay by Jeff Fassbinder
zhlédnutí 514Před 9 lety
Here is a flight over the Avalon Bay. I'm using the Typhoon 4K. Just went for a quick flight. Just open the box and fly! No need for any adjustment to gimbal or flight controls. Safe, Easy, and Fun! All music rights belong to: Artist: Adele Album: 21 Released: 2011
Viper Jet EDF with CC160 Dynamax Fan
zhlédnutí 1,4KPřed 9 lety
Here is a Viper jet from Cermark/TamJet. This is a older model but flies really well. Using a Dynamax fan system on 12s for power. I'm use Castle Creations 160HV Edge controller, and Futaba 14 MZ for guidance. Video was shot at the PVMAC club in Chino. The runway is nice and wide as you'll see when I land. Well good luck we have the extra room! Thanks for watching, Jeff Fassbinder
Burt Rutan Ares model flown and built by Scott
zhlédnutí 2,7KPřed 9 lety
Burt Rutan Ares model flown and built by Scott
Yuneec Typhoon Q500 First Flight by Jeff Fassbinder
zhlédnutí 808Před 9 lety
Yuneec Typhoon Q500 First Flight by Jeff Fassbinder
Assurance RC with Align M480L GH-G3 Gimbal & GH4 HD 720p
zhlédnutí 1,4KPřed 9 lety
Assurance RC with Align M480L GH-G3 Gimbal & GH4 HD 720p
Align M690L Multicopter Second Flight with PID adjustments to Tilt and Roll
zhlédnutí 1,7KPřed 9 lety
Align M690L Multicopter Second Flight with PID adjustments to Tilt and Roll
Messerschmitt ME 163 Komet electrified
zhlédnutí 912Před 9 lety
Messerschmitt ME 163 Komet electrified
Align Trex 550L Electronics Installation
zhlédnutí 36KPřed 9 lety
Align Trex 550L Electronics Installation
trimakasih tutorial ini sangat membantu saya
i know this is an older system and i just want to point out, the setup process is a bit ridiculous! why did they design the mrs system the way they did? could this not have been designed easier for the user, for instance removing the rudder and suppling power via rudder port, then put bind plug into throttle to bind! why not have a bind port and save pulling other servos out? this is the bug barer with this hobby! its as if they make things as complicated as possible!!
The battery cage on this heli is rubbish. Should be a wire like all other helicopters.
I mean can this heli bind to the dx6i transmitter
Hi can this heli bind to the dx6s transmitter
Hi I am trying to use a panasonic g2 with this and wonder if you can help with setting up the camera itself to work with this gimbal/osd align monitor. Regards michael
You said in one of your videos.. "reach out if you have any questions" ...yeah right...i messaged u several times on fbook messenger and u fuckn ignored me ..prick
This is awesome!! Such great memories, thanks for everything mr Fassbinder, you were an amazing team manager!!!
This video was a very helpful. Thanks.
Thes pilots are so very talented but it does just look a mess....
Congratz to JR....amazing skill....👍🙏🙏🙏👍
Hi Jeff.. I know that this video is from a long time ago.. but I am now trying to use my trex 150DFC with my futaba 16SZ. I have managed to bind it, but the pitch curves and throttle curves of the 14sg and 16 sz are different (0,25, 50, 75, 100 vs -100,-50, 0,+50, + 100).. can you pls let me know the values of Pitch and Throttle curves for 16SZ? Help from anyone else is also appreciated..
He's now the fastest drone pilot in the world right now. "Props" to MCK.
Is there any Gyro system built in receiver!
Love my 450l 6s with microbeast
Great flight.but nothing beats his 4th juli flight with his Logo 600..talk about control and precise flying, it’s out of this world 👌🏻🤘🏻😍 I still think his best flying was done on the Logo 600
Really cool seeing MCKs roots!
HI can you bind the align 3gx with a dx9 the same way, because i have installeds the AR7200 as well.. should i remove it and bind straight to the Align 3gx..( mine is silver and black one not the mrs
Next time you make video. Use a monitor. Most of it is out of sight,. You probably forgot to adjust the camera, still in close up.
Thanks for all your videos. For your wealth of knowledge. You are very informative and extremely helpful
Couldn't even see the model flying!? You have great eyes!
At one point you say, press the button on the gyro then power it up and then a little later you say power it up then press the button, which one is it? Or maybe I misunderstood and you didn't say any of that.
Has there ever been testing on 8s and 10s lipo runs?
This doesn’t work at all , tried about 20 times now and I’m giving up , going to buy a AR7200BX these always set up first time , a far superior gyro
just wanted to say THANK YOU for this detailed vid- i bought a 'new' 500L dominator and when i took the rotor head out and saw it was pre-assembled i thought the guy had done work on it already. breathing a sigh of relief now thanks to your vid :)
Worst filming job I’ve ever seen
You must be new to CZcams
@@laizalott I actually just had the 10th anniversary of my CZcams channel back on April 30. I have 164 videos and over a quarter million views.
8 years later, are you still flying this bird?
good video however every build i see they make one mistake the main shaft supports should be tightened last with the shaft in This assures alignment between bearings
Jeff I have the 300x when i spool up my tail wont hold is it a Gain issue more gain or less?? Thanks
I have a align trex 250 and when I plug the binder on aileron, or elevator, or pitch they all give me 3 blinks... I can't get the one blink for the 250.... can you please help
To confirm, can you use the values in the T6 manual with flybarless and be good to go?
I have the same transmitter with the 3gx on a 450 but it won't light up but will if I hook a receiver to it. Is it necessary to have a rece6to do that because in your video I didn't see where you used a receiver?
these things just look dangerous.
And go collect stamps then
"he" is surprisingly a good pilot.
Wow. That model plane is awesome! Yet, it looks so exotic, that its shape might have came from World War 2.
Do you happen to have an updated version for the 150GRS? Thanks
Idk if anyone can answer this. But can this heli be upgraded with the 150x grs system. Direct plug and fly ?
I have the align three GRS and I'm trained to bind to a spectrum DX6E I got it to bind once and then never again. Is there a customer support number that I can call?
Do i have to bind like this every time I want to fly ?
great flying, being able to hear the heli really makes this video shine.
Funciona neste Radio Spektrum Dxe 6ch 2.4ghz Dsmx Dsm2 para o T Rex 150
Nice jet! Really irritating two-stroke engine noise in the background. I know timing is everything and it’s too bad you were not able to get that guy to park his plane on the ramp for five minutes so you could have a better video with sound of your aircraft.
Is this the Tucson Radio Control Club Field?
Hi, I've got a 150 DFC buyed this last week, and I broke the tail, but the pins are not removing from the conector. What I'm doing wrong? is impossible to take it out!
Jaume Singla Valls You’re not doing anything wrong. I’ve changed a few of these and only managed to push ONE pin out of 12 out. You can buy new plugs from eBay and other hobby stores. The best way is to just unsolder the connection replace the motor and solder the connection back on.
@@heeder777 Thanks, Is what I did, also I bought new plugs, and this ones, they dismount and mount really easy.
Is the receiver of this aircraft 150 MRS or GRS? My arm was so great that I was moved.
veryy amazing== thankyou
Why did you talk like a robot for f sakes
Great video, very well explained. Thanks very much Jeff! 🚁👍
Thanks for such good video! But I have a question! : Can I use same settings for T-Rex 700N (gas version)/ Or what pitches I should set up for it? Thank you! :)
Do you have to leave the dsmx satellite in the helicopter permanently after binding or can you unplug it and take it out?