![Millside](/img/default-banner.jpg)
- 20
- 57 295
Millside
South Africa
Registrace 18. 06. 2021
Duotight Bakk Lock Disconnect Spanner
The DuoTight Disconnect Spanner is a very handy tool which attaches quickly and effortlessly to the DuoTight Ball Lock Disconnect, making the process of stripping and cleaning the Ball Lock, simpler and hassle free.
In order to clean the DuoTight Ball Lock Disconnect the top segment of the unit needs to be twisted anti-clockwise to open and clean the inside portion. This can be difficult and often requires using a vice grip or water pump pliers which can damage the segment. The DuoTight Disconnect Spanner was developed specifically to solve this problem.
The DuoTight Ball Lock Disconnect Spanner has been manufactured from PLA plastic.
Additional Information:
Best of all the DuoTight Disconnect Spanner can be used to tighten the unit, once DuoTight Ball Lock Disconnect has been cleaned.
Polylactic Acid (PLA) is a thermoplastic monomer derived from organic sources such as corn starch or sugar cane and is known as the Environmentally Responsible Plastic.
Compatibility:
Suitable for use with both 8mm and 9.5mm DuoTight Ball Lock Disconnects.
DuoTight Ball Lock Disconnect is sold separately - used for graphic purposes only.
At Millside we are dedicated to bringing the age-old craft of distilling to your home or business.
Built by a passion for distilling, Millside was created to bring the best products and ingredients to your home or business distillery. For emerging and established alcoholics (alcohol enthusiasts) a like.
Making your own craft liquor can be daunting, Millside will make this process simple and easy. The right equipment for the job, coupled with some great recipes and tips will make the process a whole lot of fun.
Check out our online store at www.millside.co.za for all your craft distilling needs. We offer a wide range of products like, botanicals, maturation products, distilling equipment and much more.
Official Distributor of KegLand in South Africa
Website: www.millside.co.za/
Instagram: millside.distilling.supplies
Facebook: MillsideCraftDistilling
In order to clean the DuoTight Ball Lock Disconnect the top segment of the unit needs to be twisted anti-clockwise to open and clean the inside portion. This can be difficult and often requires using a vice grip or water pump pliers which can damage the segment. The DuoTight Disconnect Spanner was developed specifically to solve this problem.
The DuoTight Ball Lock Disconnect Spanner has been manufactured from PLA plastic.
Additional Information:
Best of all the DuoTight Disconnect Spanner can be used to tighten the unit, once DuoTight Ball Lock Disconnect has been cleaned.
Polylactic Acid (PLA) is a thermoplastic monomer derived from organic sources such as corn starch or sugar cane and is known as the Environmentally Responsible Plastic.
Compatibility:
Suitable for use with both 8mm and 9.5mm DuoTight Ball Lock Disconnects.
DuoTight Ball Lock Disconnect is sold separately - used for graphic purposes only.
At Millside we are dedicated to bringing the age-old craft of distilling to your home or business.
Built by a passion for distilling, Millside was created to bring the best products and ingredients to your home or business distillery. For emerging and established alcoholics (alcohol enthusiasts) a like.
Making your own craft liquor can be daunting, Millside will make this process simple and easy. The right equipment for the job, coupled with some great recipes and tips will make the process a whole lot of fun.
Check out our online store at www.millside.co.za for all your craft distilling needs. We offer a wide range of products like, botanicals, maturation products, distilling equipment and much more.
Official Distributor of KegLand in South Africa
Website: www.millside.co.za/
Instagram: millside.distilling.supplies
Facebook: MillsideCraftDistilling
zhlédnutí: 70
Video
Carbonating BEER | How to CARBONATE 18L of Ale in less than 5 Minutes
zhlédnutí 283Před rokem
We are thrilled to announce the much-anticipated Limited Release of the new and improved Carb X Pro System, is now available. After months of dedicated development, we have perfected this game-changing innovation that will revolutionize your drink experience. The Carb X Pro System goes beyond fast carbonation, offering a multitude of impressive functionalities. Not only does it efficiently carb...
SODA WATER MADE EASY | Using the Brand New CarbX Pro by Millside
zhlédnutí 155Před rokem
Introducing the BRAND NEW CarbX Pro from Millside, your ultimate solution for effortlessly creating soda water at home. In this exciting video tutorial, we will walk you through the simple steps of harnessing the power of the CarbX Pro to make refreshing, fizzy soda water with just a few easy steps. Say goodbye to store-bought sodas and hello to a healthier, customizable alternative right from ...
CarbX Pro - NEW Release COMING SOON
zhlédnutí 209Před rokem
COMING SOON... Attention beverage enthusiasts and aficionados! We have an announcement that will make your taste buds tingle with excitement! Introducing the highly anticipated Limited Release of the all-new and improved CarbX Pro System, proudly developed over an entire year of meticulous craftsmanship by Millside. Prepare to be blown away, as it not only boasts lightning-fast carbonation capa...
The Artemis In-Line Hop Infuser | add Hops at any point in your brew
zhlédnutí 215Před rokem
The Artemis In-Line Hop Infuser has been manufactured from 316 and 304 Stainless Steel and comes standard with Camlock Fittings. The Artemis In-Line Hop Infuser allows the Brewer to add Hops in either pellet or cone form whilst performing In-Line Hopping at any point in the mashing, boiling or cooling stage of a brew. Under the Top Inlet is a Diffuser Plate, which sits on top of the Hop Basket....
Clinton from Millside Chats with Kee from KegLand all about the new KegLand BrewZilla Gen4
zhlédnutí 1,1KPřed 2 lety
The BrewZilla Gen 4 is a complete turnkey Brewery system with a delay timing feature and step mash functionality. Built to make batches up to 30L, it is the ideal solution for those who want to take the first step in all-grain Brewing while also wanting full control of their batch from start to finish. The BrewZilla Gen 4 - 35L Home Brewing System that can be run off a single 220V-240V socket. ...
KegLand FILL-O-METER | Volumetric water measuring device for your brewing systems
zhlédnutí 587Před 2 lety
he Fill-O-Meter is a must have for any Home-Brewer. This clever device takes the stress out of standing next to the hose waiting for the required amount of water is needed for that all important Brew. Simply select the required amount of water and walk away. Unlike other tap timers that simply measure time, the Fill-O-Meter measures the volume of water and will automatically turn off when the s...
The Worlds Best Party Keg | Millside Oxebar
zhlédnutí 912Před 2 lety
The world's best party keg! The Oxebar 8L Keg is a great valued re-usable plastic Keg, which makes it a convenient way to store your Home Brew in a smaller sized container than traditional 19L Corny Kegs. The Oxebar 8L Keg is convenient in size, lightweight and perfect for sharing beverages with family and friends. At Millside we are dedicated to bringing the age-old craft of distilling to your...
Clinton chats to Kee from KegLand about the new RAPT PILL!
zhlédnutí 3,8KPřed 2 lety
At Millside we are dedicated to bringing the age-old craft of distilling to your home or business. Built by a passion for distilling, Millside was created to bring the best products and ingredients to your home or business distillery. For emerging and established alcoholics (alcohol enthusiasts) a like. Making your own craft liquor can be daunting, Millside will make this process simple and eas...
KegLand FermZilla All Rounder VS the KegLand FermZilla Conical.
zhlédnutí 14KPřed 2 lety
KegLand FermZilla All rounder Versus the KegLand FermZilla Conical. Which FermZilla is best for you and your brewing needs? At Millside we are dedicated to bringing the age-old craft of distilling to your home or business. Built by a passion for distilling, Millside was created to bring the best products and ingredients to your home or business distillery. For emerging and established alcoholic...
CLINTON CHATS WITH THE INVENTORS OF PLAATO | The worlds first fermentation analyzer.
zhlédnutí 84Před 2 lety
We are excited to announce that Millside Craft Distilling Supplies will be a proud distributor of the Plaato range of products, initially on a Pre-Order basis, here in South Africa. To find out about pre-ordering these new products, please head over to our website and check out the Plaato section under the Pre-Orders tab and subscribe to our mailing list to find out all the latest information. ...
Clinton from Millside Chats with Kee from KegLand
zhlédnutí 2KPřed 2 lety
At Millside we are dedicated to bringing the age-old craft of distilling to your home or business. Built by a passion for distilling, Millside was created to bring the best products and ingredients to your home or business distillery. For emerging and established alcoholics (alcohol enthusiasts) a like. Making your own craft liquor can be daunting, Millside will make this process simple and eas...
ALL ABOUT CAMLOCK FITTINGS & DIFFUSION STONES
zhlédnutí 170Před 3 lety
All about the KegLand Camlock Fittings and Diffusion Stones. What they do and how to use them. Why use Camlock Fittings and what makes them special? Why use a Diffusion Stone for rapid carbonatation and oxygenation? Need to know more, visit Millside.co.za At Millside we are dedicated to bringing the age-old craft of distilling to your home or business. Built by a passion for distilling, Millsid...
KegLand Duotights & Valves | Millside Craft Distilling Supplies
zhlédnutí 400Před 3 lety
At Millside we are dedicated to bringing the age-old craft of distilling to your home or business. Built by a passion for distilling, Millside was created to bring the best products and ingredients to your home or business distillery. For emerging and established alcoholics (alcohol enthusiasts) a like. Making your own craft liquor can be daunting, Millside will make this process simple and eas...
DISTILLING WITH THE KEGLAND DIGIBOIL | UPGRADES AND ACCESSORIES
zhlédnutí 20KPřed 3 lety
Distilling with the DigiBoil. This multifunctional brewing and distilling system is an affordable option for both the home-brewer and distiller. From beer to hardtack, this system can do it all. We are the officially stockist of KegLand products in South Africa. At Millside we are dedicated to bringing the age-old craft of distilling to your home or business. Built by a passion for distilling, ...
Comparision between BrewZilla and DigiBoil Edited
zhlédnutí 12KPřed 3 lety
Comparision between BrewZilla and DigiBoil Edited
KEGLAND BREWZILLA & DIGIBOIL IN SOUTH AFRICA | Only at Millside
zhlédnutí 409Před 3 lety
KEGLAND BREWZILLA & DIGIBOIL IN SOUTH AFRICA | Only at Millside
Millside Stainless Steel Products | Custom, made to order stainless steel distilling equipment.
zhlédnutí 276Před 3 lety
Millside Stainless Steel Products | Custom, made to order stainless steel distilling equipment.
Introduction to Millside | Craft Distilling Suppliers in South Africa
zhlédnutí 174Před 3 lety
Introduction to Millside | Craft Distilling Suppliers in South Africa
KEGLAND HAS JUSTED LANDED IN SOUTH AFRICA | Millside Craft Distilling supplies
zhlédnutí 287Před 3 lety
KEGLAND HAS JUSTED LANDED IN SOUTH AFRICA | Millside Craft Distilling supplies
Wait? Cant you serve directly from the smaller all rounder?
what is your actual body weight?
I must have one! Solves the carbonation issues of my NA ferments. Don't really want to carbonate naturally as this adds additional alcohol. Nor do I want to wait 2 weeks for forced carbonation. Perfection solution.
Thanks for sharing. How long would you need to gas 22 litres?
How does this compare to soda stream and drinkmate?
Cool 👍 .... Please don't record the next video in vertical mode ... monitors are widescreen for a reason 😜
Does the t500 column fit onto the 65l digiboil
I have a question. I would like to use the flowmeter to measure hot water at a temperature of 78°C, but for distribution with components (e.g. John Guest) the maximum temperature is 65°C. I would therefore like to perform the measurement on the cold water supply in front of the boiler, which heats the water and the cold water displaces the hot water. The flow meter would not come into contact with hot water and would count the same amount of hot water flowed. At the outlet of the boiler, I would put a non-return valve which, after stopping the water from the Flow meter, will limit the saturated air and prevent the leakage of the remaining water (there will not be any pressure to force the water out. The question is ... will it work?
Great discussion
Thanks Clinton. Really appreciate the chance to talk to your customers about the new Gen 4!
So is the Gen 4 suitable for distilling using something like a 4inch 4 plate column? What are the downsides if any? Are there other boilers more suitable?
@@TPGMatt definitely suitable and will be what I am going to be mostly using it for!
thanks for sharing .... will watch later tonight 👍
Had mine 2yrs...great product...many cooks👍👌 I distill on the grain with this
Hello Doug Shelton, may you help me to distill with this if you did , thanks
What temperature is a good setting for distilling
@@chrispiatt3801965 210 with both elements going till you hit 190°..then turn off 500 watt switch...by the time it hits 210 you should be running low wines at 25%..it takes a few runs to get the hang of it...hope this helps...cheers😊 Be sure you use a brew bag if cooking on grain to keep from scorching..also a stainless steel strainer makes a good heat spacer in the bottom
Can this device work in the US?
temperature range? ... can I eg. hook it up to the hot water supply @ ±65ºC ?
Bring on the full vid 👍
amazing stuff
Very nice and well done.
I had some questions on this product(digiboil) and emailed kegland, One question was if the elements are ultra low watt density elements . reply was yes they are, same as brewzilla.... just though I would share what I was told.
Hi! I'vre read that you can tap your beer directly from the new fermzilla conical. Is this true? what extra equipment do you need? Great vid, thanks!
Brewzilla 4 in SA?
Any update on when the Brewzilla gen 4 will be released ?
Good informative vid Thanks
Great vid mate, I like the simplicity of the digiboiler/still.
28:15 Funny that he mentions Norway. South Africa and Norway is in the same time zone from April to October 😂
@Clinton, Thanks for importing these and making the Kegland stuff easily available to us South Africans. 😍
Nice chat 👍 Question tho: Why is the Millside price on the evabarrier line so much more than Kegland's which is a 12M roll of ±R135
Hi there. Ok good point. Firstly the goods are distributed from Keglands distribution point in Mainland China. We then have the transport, import duties, Courier fees and V.A.T before we have put any sort of mark up. What really kills us here is the transport unpredictable customs duty and variations in the Dollar to rand that really do make a major difference. I do believe that as we develop a bigger customer base we will be able to order in much larger quantities we will also help us to bring the prices down. Thanks for the response.
@@clintonmills5650 Ok cool, I get your point, but from ALL the products you brought in, this one stood out like a sore thumb because of the ±400% price difference 😜
Very very happy to see a proper supplier of Kegland products here in SA now. There are already a good number of welcome products on your site that I'll be ordering. Can't wait to see the rest of the range come in